component
THP210DGKT
Public Made by Adomby adom
Texas Instruments Precision Op Amps, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTHP210DGKT
Texas Instruments · Precision Op Amps · VSSOP-8
THP210DGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Inverting amplifier input; differential voltage between IN+ and IN- limited to ±0.5 V maximum with input current limited to ±10 mA maximum. |
| 2 | VOCM | input | Output common-mode voltage control input with input impedance of 2.5 MΩ |
| 3 | VS+ | power_in | Positive power-supply input; dual-supply operating range ±1.5 V to ±18 V or single-supply range 3 V to 36 V. |
| 4 | OUT+ | output | Noninverting amplifier output with maximum output current ±50 mA; output voltage swing minimum 230 mV from positive rail at ±18 V supply. |
| 5 | OUT- | output | Inverting amplifier output with maximum output current ±50 mA; output voltage swing minimum 230 mV from negative rail at ±18 V supply. |
| 6 | VS- | power_in | Negative power-supply input; dual-supply operating range ±1.5 V to ±18 V or single-supply range 3 V to 36 V. |
| 7 | PD | input | Power-down control input referenced to VS+; logic low (less than VS+ - 2.0 V) disables amplifier reducing quiescent current to less than 20 µA; logic high enables normal operation. |
| 8 | IN+ | input | Noninverting amplifier input; differential voltage between IN+ and IN- limited to ±0.5 V maximum with input current limited to ±10 mA maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
THP210DGKT - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
thp210dgkt-etched.step/thp210dgkt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);thp210dgkt.step/thp210dgkt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
c7f6404d2bae11a1, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).