3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMIC4120YME-TR
Microchip Tech · Gate Drive ICs · SOIC-8-EP
MIC4120YME-TR from Microchip Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Supply input for the driver, operating from 4.5V to 20V; duplicate pins 1 and 8 must be externally connected together. |
| 2 | IN | input | Control input that accepts a logic high from 2.4V up to VS and tolerates a negative swing of up to 5V below ground. |
| 3 | NC | unconnected | Not connected. |
| 4 | GND | power_in | Ground; duplicate pins 4 and 5 must be externally connected together and returned to power ground. |
| 5 | GND | power_in | Ground; duplicate pins 4 and 5 must be externally connected together and returned to power ground. |
| 6 | OUT | output | Driver output capable of 6A peak output current at VS = 20V; duplicate pins 6 and 7 must be externally connected together. |
| 7 | OUT | output | Driver output capable of 6A peak output current at VS = 20V; duplicate pins 6 and 7 must be externally connected together. |
| 8 | VS | power_in | Supply input for the driver, operating from 4.5V to 20V; duplicate pins 1 and 8 must be externally connected together. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic 1 Input Voltage | VIH | 2.4 | V | TA = 25°C, 4.5V ≤ VS ≤ 20V (table header) | 3 | ||
| Logic 0 Input Voltage | VIL | 1.5 | 0.8 | V | TA = 25°C, 4.5V ≤ VS ≤ 20V (table header) | 3 | |
| Input Voltage Range | VIN | -5 | V | TA = 25°C, 4.5V ≤ VS ≤ 20V (table header) | 3 | ||
| Input Current | IIN | -10 | 10 | µA | 0 V ≤ VIN ≤ VS | 3 | |
| Low Output Voltage | VOL | 0.025 | V | See Figure 1 | 3 | ||
| Output Resistance, Output Low | RO | 1.4 | 5 | Ω | IOUT = 10 mA, VS = 20 V | 3 | |
| Output Resistance, Output High | RO | 1.5 | 5 | Ω | IOUT = 10 mA, VS = 20 V | 3 | |
| Latch-Up Protection Withstand Reverse Current | IR | 200 | mA | 3 | |||
| Rise Time | tR | 12 | 30 | ns | Test Figure 1, CL = 2200 pF | 3 | |
| Rise Time (second printed row) | tR | 35 | ns | 3 | |||
| Fall Time | tF | 13 | 30 | ns | Test Figure 1, CL = 2200 pF | 3 | |
| Fall Time (second printed row) | tF | 35 | ns | 3 | |||
| Delay Time | tD1 | 45 | 75 | ns | Test Figure 1 | 3 | |
| Delay Time (second printed row) | tD1 | 100 | ns | 3 | |||
| Delay Time | tD2 | 50 | 75 | ns | Test Figure 1 | 3 | |
| Power Supply Current | IS | 0.45 | 3 | mA | VIN = 3 V | 3 | |
| Power Supply Current | IS | 60 | 400 | µA | VIN = 0 V | 3 | |
| Operating Input Voltage | VS | 4.5 | 20 | V | 3 | ||
| Supply Voltage (operating ratings) | 4.5 | 20 | V | 3 | |||
| Junction Temperature (operating) | -40 | 125 | °C | 3 | |||
| Input Voltage (negative swing limit) | -5 | V | GND, 5V limit | 3 | |||
| Input Current (VIN > VS) | 50 | mA | VIN > VS | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Lead Temperature | 300 | °C | 10 sec. | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | 4. Devices are ESD sensitive. Handling precautions recommended. Human body model: 1.5kΩ in series with 100pF. Absolute Maximum Ratings (Notes 1, 2 and 3) | 3 |
CAD (KiCad official)
- Symbol:
MIC4120YME-TR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
mic4120yme-tr-etched.step/mic4120yme-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4120yme-tr.step/mic4120yme-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (10 pp, sha256
772c303b20c5202d, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).