3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA293B2IDBVT
Texas Instruments · Current Sense Amplifiers · SOT-23-5
INA293B2IDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output voltage pin; with zero input current the output is at most GND + 20 mV, and the output swing is limited by the supply (Vs - 0.15 V maximum at 10 kΩ load). |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | Vs | power_in | Power supply input; operating supply range is 2.7 V to 20 V (absolute maximum −0.3 V to 22 V). |
| 4 | IN+ | input | Shunt resistor positive sense input; common-mode voltage must stay within −4 V to 110 V (absolute common-mode limits −20 V to 120 V). |
| 5 | IN- | input | Shunt resistor negative sense input; common-mode voltage must stay within −4 V to 110 V (absolute common-mode limits −20 V to 120 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -4 | 110 | V | TA = -40°C to +125°C | 5 | |
| Common-mode rejection ratio, input referred | CMRR | 140 | 160 | dB | -4 V ≤ VCM ≤ 110 V, TA = -40°C to +125°C | 5 | |
| Offset voltage, input referred (INA293x2) | Vos | -80 | 15 | 80 | µV | 5 | |
| Offset voltage drift (INA293x1/x2/x3) | dVos/dT | -0.5 | 0.05 | 0.5 | µV/℃ | TA = -40℃ to +125℃ | 5 |
| Power supply rejection ratio, input referred (INA293x2) | PSRR | -3 | 0.3 | 3 | µV/V | 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C | 5 |
| Input bias current IB+ | IB+ | 10 | 20 | 30 | uA | VSENSE = 0 V | 5 |
| Input bias current IB- | IB- | 10 | 20 | 30 | uA | VSENSE = 0 V | 5 |
| Gain error | GERR | -0.15 | 0.02 | 0.15 | % | GND + 50 mV ≤ VOUT ≤ VS, 200 mV | 6 |
| Gain drift | -10 | 1 | 10 | ppm/°C | TA = -40°C to +125°C | 6 | |
| Swing to Vs (relative to VS) | -0.15 | -0.07 | V | RLOAD = 10 kΩ, TA = -40°C to +125°C | 6 | ||
| Swing to ground | 0.005 | 0.02 | V | RLOAD = 10 kΩ, VSENSE = 0 V, TA = -40°C to +125°C | 6 | ||
| Maximum capacitive load | 500 | pF | No sustained oscillations, no isolation resistor | 6 | |||
| Supply voltage | Vs | 2.7 | 20 | V | TA = -40°C to +125°C | 6 | |
| Quiescent current | IQ | 1.5 | 2 | mA | 6 | ||
| Quiescent current over temperature | IQ | 2.25 | mA | TA = -40°C to +125°C | 6 | ||
| Supply voltage (absolute maximum) | Vs | -0.3 | 22 | V | 4 | ||
| Differential input voltage (VIN+, VIN-) | -12 | 12 | V | All others (not INA293x5) | 4 | ||
| Common-mode input voltage (absolute maximum) | -20 | 120 | V | 4 | |||
| Output voltage (absolute maximum, relative to GND and VS) | -0.3 | 0.3 | V | Min relative to GND; max relative to Vs (Vs + 0.3 V) | 4 | ||
| Operating temperature (absolute maximum) | TA | -55 | 150 | °C | 4 | ||
| Junction temperature (absolute maximum) | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input range (recommended) | VCM | -4 | 48 | 110 | V | 5 | |
| Operating supply range (recommended) | VS | 2.7 | 5 | 20 | V | 5 | |
| Differential sense input range | VSENSE | 0 | V | Max printed as VS / G | 5 | ||
| Ambient temperature (recommended) | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance (DBV, 5 pins) | RθJA | 184.7 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 105.6 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 47.2 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ΨJT | 21.5 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ΨJB | 46.9 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
INA293B2IDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina293b2idbvt-etched.step/ina293b2idbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina293b2idbvt.step/ina293b2idbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
48c5dc22a03325c7, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).