Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F18313T-I/SN

Microchip Tech · Pre-ordered MCUs · SOIC-8-EP

PIC16F18313T-I from Microchip Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply; all VDD and VSS pins must be connected and decoupled with a 0.1 µF ceramic capacitor placed close to the pins, and none may be left floating.
2 RA5 bidirectional General-purpose TTL/ST input and CMOS output; also OSC1/CLKIN (crystal or external clock input), T1CKI, SOSCI/SOSCIN, ANA5 analog input and CCP1/CCP2 inputs.
3 RA4 bidirectional General-purpose TTL/ST input and CMOS output; also OSC2/CLKOUT (FOSC/4 output), SOSCO, T1G timer gate input and ANA4 analog input.
4 RA3/MCLR/VPP input Input-only pin (RA3) with internal pull-up when MCLR is enabled; functions as Master Clear reset input when MCLRE is set, and as high-voltage programming supply VPP.
5 RA2 bidirectional General-purpose TTL/ST input and CMOS output; also ANA2 analog input, VREF- and DAC1REF- negative references, T0CKI, CWG1IN and external interrupt INT.
6 RA1/ICSPCLK bidirectional General-purpose TTL/ST input and CMOS output; also ICSPCLK serial programming clock, ICDCLK in-circuit debug clock, ANA1 analog input and VREF+ positive reference input.
7 RA0/ICSPDAT bidirectional General-purpose TTL/ST input and CMOS output; also ICSPDAT serial programming data I/O, ICDDAT in-circuit debug data I/O, ANA0 analog input, C1IN0+ comparator input and DAC1OUT output.
8 VSS power_in Ground reference; all VDD and VSS pins must be connected.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8-EP
Category Embedded Processors & Controllers
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage on VDD pin with respect to VSS VDD -0.3 6.5 V PIC16F18313/18323 390
Voltage on MCLR pin with respect to VSS -0.3 9 V 390
Ambient temperature under bias -40 125 °C 390
Storage temperature -65 150 °C 390
Maximum current on VSS pin 250 mA -40°C TA +85°C 390
Maximum current on VSS pin 85 mA +85°C TA +125°C 390
Maximum current on VDD pin 250 mA -40°C TA +85°C 390
Maximum current on VDD pin 85 mA +85°C TA +125°C 390
Maximum current on any I/O pin 50 mA 390
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 390
Total power dissipation 800 mW 390
VDDMIN operating supply voltage VDD 2.3 V PIC16F18313/18323, FOSC ≤ 16 MHz 391
VDDMIN operating supply voltage VDD 2.5 V PIC16F18313/18323, FOSC ≤ 32 MHz 391
VDDMAX operating supply voltage VDD 5.5 V PIC16F18313/18323 391
TA_MIN operating ambient temperature TA -40 °C Industrial temperature 391
TA_MAX operating ambient temperature TA 85 °C Industrial temperature 391
Supply voltage VDD (D002) VDD 2.3 5.5 V FOSC ≤ 16 MHz 393
Supply voltage VDD (D002) VDD 2.5 5.5 V FOSC > 16 MHz 393
RAM data retention voltage VDR 1.7 V Device in Sleep mode 393
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms BOR and LPBOR disabled 393
Supply current XT oscillator 4 MHz IDDXT4 302 410 uA XT = 4 MHz; 3.0V 395
Supply current HFINTOSC 16 MHz IDDHFO16 1.3 1.6 mA HFINTOSC = 16 MHz; 3.0V 395
Supply current HFINTOSC 32 MHz PLL IDDHFOPLL 2.1 2.6 mA HFINTOSC = 32 MHz; 3.0V 395
Supply current HS+PLL 32 MHz IDDHSPLL32 2.1 2.5 mA HS+PLL = 32 MHz; 3.0V 395
Supply current Idle mode IDDIDLE 743 1100 uA Idle Mode, HFINTOSC = 16 MHz; 3.0V 395
Power-down current IPD base IPD 0.3 2.4 µA VREGPM = 1; 3.0V; max at +85°C 396
Power-down current IPD base IPD 0.3 5.6 µA VREGPM = 1; 3.0V; max at +125°C 396
Power-down current Low-Frequency Internal Oscillator/WDT IPD_WDT 0.5 3.3 µA VREGPM = 1; 3.0V; max at +85°C 396
Power-down current Low-Frequency Internal Oscillator/WDT IPD_WDT 0.5 6.6 µA VREGPM = 1; 3.0V; max at +125°C 396
Power-down current Brown-out Reset (BOR) IPD_BOR 10.5 16.4 µA VREGPM = 1; 3.0V; max at +85°C 396
Power-down current Brown-out Reset (BOR) IPD_BOR 10.5 19.4 µA VREGPM = 1; 3.0V; max at +125°C 396
Power-down current Comparator IPD_CMP 30 44 µA VREGPM = 1; 3.0V; max at +85°C 396
Power-down current Comparator IPD_CMP 30 49 µA VREGPM = 1; 3.0V; max at +125°C 396
Input low voltage, TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 397
Input low voltage, 1.8V to 4.5V range VIL 0.15 VDD 1.8V ≤ VDD ≤ 4.5V 397
Input low voltage, Schmitt Trigger buffer VIL 0.2 VDD 2.0V ≤ VDD ≤ 5.5V 397
Input low voltage, MCLR VIL 0.2 VDD 397
Input high voltage, TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 397
Input high voltage, Schmitt Trigger buffer VIH 0.8 VDD 2.0V ≤ VDD ≤ 5.5V 397
Input high voltage, MCLR VIH 0.7 VDD 397
Input leakage current, I/O ports IIL -125 5 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C 397
Input leakage current, I/O ports IIL -1000 5 1000 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C 397
Input leakage current, MCLR IIL -200 50 200 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C 397
Weak pull-up current IPUR 25 120 200 µA VDD = 3.0V, VPIN = VSS 397
Output low voltage, I/O ports VOL 0.6 V IOL = 10.0 mA, VDD = 3.0V 397
PLL input frequency range FPLLIN 4 8 MHz 403
PLL output frequency range FPLLOUT 16 32 MHz 403
Watchdog Timer time-out period TWDT 10 16 27 ms 16 ms Nominal Reset Time 406
Power-up Timer period TPWRT 40 65 140 ms 406
Brown-out Reset voltage VBOR 2.55 2.7 2.85 V BORV = 0 406
Brown-out Reset voltage VBOR 2.3 2.45 2.6 V BORV = 1 (PIC16F18313/18323) 406
Voltage on MCLR/VPP pin to enter Programming mode VIHH 7.9 9 V Note 2 398
Supply current during programming operation IDDPGM 5 mA 398
Junction-to-ambient thermal resistance, 8-pin SOIC JA 112.4 C/W 8-pin SOIC package 399
Junction-to-case thermal resistance, 8-pin SOIC JC 50 C/W 8-pin SOIC package 399
Maximum junction temperature TJMAX 150 C 399
Power-on Reset release voltage VPOR 1.6 V BOR and LPBOR disabled 393
Power-on Reset rearm voltage VPORR 1.5 V BOR and LPBOR disabled 393

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS BODY RxyPPS 259

CAD (KiCad official)

  • Symbol: PIC16F18313T-I
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: pic16f18313t-i-etched.step / pic16f18313t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f18313t-i.step / pic16f18313t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (471 pp, sha256 5b9713da292b02eb, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F18313T-I/SN. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F18313T-I/RF