Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

GD65232PWR

Texas Instruments · RS232 ICs · TSSOP-20

GD65232PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive RS232 power supply, recommended 7.5 V to 15 V, and must be powered up after VSS and before VCC.
2 RA1 input RS232 receiver input with an absolute input voltage range of -30 V to 30 V.
3 RA2 input RS232 receiver input with an absolute input voltage range of -30 V to 30 V.
4 RA3 input RS232 receiver input with an absolute input voltage range of -30 V to 30 V.
5 DY1 output RS232 driver output with an output voltage range of -15 V to 15 V.
6 DY2 output RS232 driver output with an output voltage range of -15 V to 15 V.
7 RA4 input RS232 receiver input with an absolute input voltage range of -30 V to 30 V.
8 DY3 output RS232 driver output with an output voltage range of -15 V to 15 V.
9 RA5 input RS232 receiver input with an absolute input voltage range of -30 V to 30 V.
10 VSS power_in Negative RS232 power supply, recommended -7.5 V to -15 V, and powered up first.
11 GND power_in Ground, the network ground terminal to which all voltages are referenced.
12 RY5 output TTL receiver output with a maximum receiver low-level output current of 20 mA.
13 DA3 input TTL driver input with VIH minimum 1.9 V and VIL maximum 0.8 V.
14 RY4 output TTL receiver output with a maximum receiver low-level output current of 20 mA.
15 DA2 input TTL driver input with VIH minimum 1.9 V and VIL maximum 0.8 V.
16 DA1 input TTL driver input with VIH minimum 1.9 V and VIL maximum 0.8 V.
17 RY3 output TTL receiver output with a maximum receiver low-level output current of 20 mA.
18 RY2 output TTL receiver output with a maximum receiver low-level output current of 20 mA.
19 RY1 output TTL receiver output with a maximum receiver low-level output current of 20 mA.
20 VCC power_in Device power supply for TTL logic, recommended 4.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Interface
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC VCC 10 V 4
Supply voltage VDD VDD 15 V 4
Supply voltage VSS VSS -15 V 4
Input voltage range, Driver VI -15 7 V 4
Input voltage range, Receiver VI -30 30 V 4
Driver output voltage range VO -15 15 V 4
Receiver low-level output current IOL 20 mA 4
Operating virtual junction temperature TJ 150 °C 4
Storage temperature range Tstg -65 150 °C 4
Supply voltage VDD VDD 7.5 9 15 V 4
Supply voltage VSS VSS -7.5 -9 -15 V 4
Supply voltage VCC VCC 4.5 5 5.5 V 4
High-level input voltage (driver only) VIH 1.9 V 4
Low-level input voltage (driver only) VIL 0.8 V 4
High-level output current, Driver IOH -6 mA Driver 4
High-level output current, Receiver IOH -0.5 mA Receiver 4
Low-level output current, Driver IOL 6 mA Driver 4
Low-level output current, Receiver IOL 16 mA Receiver 4
Operating free-air temperature (GD65232) TA -40 85 °C GD65232 4
Supply current from VDD IDD 15 mA All inputs at 1.9V, No load, VDD = 9V VSS = -9V 5
Supply current from VDD IDD 19 mA All inputs at 1.9V, No load, VDD = 12V VSS = -12V 5
Supply current from VDD IDD 25 mA All inputs at 1.9V, No load, VDD = 15V VSS = -15V 5
Supply current from VSS ISS -15 mA All inputs at 1.9V, No load, VDD = 9V VSS = -9V 5
Supply current from VSS ISS -19 mA All inputs at 1.9V, No load, VDD = 12V VSS = -12V 5
Supply current from VSS ISS -25 mA All inputs at 1.9V, No load, VDD = 15V VSS = -15V 5
Supply current from VCC (GD65232) ICC 38 mA All inputs at 5V, No load, VCC = 5V 5
High-level output voltage VOH 6 7.5 V VIL = 0.8V, RL = 3kΩ, See Figure 6-1 6
Low-level output voltage VOL -7.5 -6 V VIH = 1.9V, RL = 3kΩ, See Figure 6-1 6
High-level input current IIH 10 µA VI = 5V, See Figure 6-2 6
Low-level input current IIL -1.6 mA VI = 0, See Figure 6-2 6
High-level short-circuit output current IOS(H) -4.5 -12 -19.5 mA VIL = 0.8V, VO = 0, See Figure 6-1 6
Low-level short-circuit output current IOS(L) 4.5 12 19.5 mA VIH = 2V, VO = 0, See Figure 6-1 6
Output resistance ro 300 Ω VCC = VDD = VSS = 0, VO = -2V to 2V 6
Propagation delay time, low- to high-level output (driver) tPLH 315 500 ns RL = 3kΩ to 7kΩ, CL = 15pF, See Figure 6-3 6
Propagation delay time, high- to low-level output (driver) tPHL 75 175 ns RL = 3kΩ to 7kΩ, CL = 15pF, See Figure 6-3 6
Transition time, low- to high-level output (driver) tTLH 60 100 ns RL = 3kΩ to 7kΩ, CL = 15pF, See Figure 6-3 6
Transition time, low- to high-level output (driver, CL=2500pF) tTLH 1.7 2.5 µs CL = 2500 pF, See Figure 6-3 and (1) 6
Transition time, high- to low-level output (driver) tTHL 40 75 ns RL = 3kΩ to 7kΩ, CL = 15pF, See Figure 6-3 6
Transition time, high- to low-level output (driver, CL=2500pF) tTHL 1.5 2.5 µs CL = 2500pF, See Figure 6-3 and (1) 6
Positive-going input threshold voltage VIT+ 1.75 1.9 2.3 V TA = 25°C, See Figure 6-5 7
Negative-going input threshold voltage VIT- 0.75 0.97 1.25 V 7
Input hysteresis voltage (VIT+ - VIT-) Vhys 0.5 V 7
High-level output voltage VOH 2.6 4 5 V IOH = −0.5mA, VIH = 0.75V 7
Low-level output voltage VOL 0.2 0.45 V IOL = 10mA, VI = 3V 7
High-level input current (GD65232) IIH 3.6 11 mA VI = 25V, See Figure 6-5 7
Low-level input current (GD65232) IIL -3.6 -11 mA VI = -25V, Figure 6-5 7
Short-circuit output current IOS -3.4 -12 mA See Figure 6-4 7
Propagation delay time, low- to high-level output (receiver) tPLH 107 250 ns CL = 50pF, RL = 5kΩ, See Figure 6-6 7
Propagation delay time, high- to low-level output (receiver) tPHL 42 150 ns CL = 50pF, RL = 5kΩ, See Figure 6-6 7
Transition time, low- to high-level output (receiver) tTLH 175 350 ns CL = 50pF, RL = 5kΩ, See Figure 6-6 7
Transition time, high- to low-level output (receiver) tTHL 16 60 ns CL = 50pF, RL = 5kΩ, See Figure 6-6 7
Propagation delay time, low- to high-level output (receiver, CL=15pF) tPLH 100 160 ns CL = 15pF, RL = 1.5kΩ, See Figure 6-6 7
Propagation delay time, high- to low-level output (receiver, CL=15pF) tPHL 60 100 ns CL = 15pF, RL = 1.5kΩ, See Figure 6-6 7
Transition time, low- to high-level output (receiver, CL=15pF) tTLH 90 175 ns CL = 15pF, RL = 1.5kΩ, See Figure 6-6 7
Transition time, high- to low-level output (receiver, CL=15pF) tTHL 15 50 ns CL = 15pF, RL = 1.5kΩ, See Figure 6-6 7
High-level input current (GD65232, VI = 3V) IIH 0.43 mA VI = 3V, See Figure 6-5 7
Low-level input current (GD65232, VI = -3V) IIL -0.43 mA VI = -3V, See Figure 6-5 7
Junction-to-ambient thermal resistance (PW) RθJA 97.5 °C/W 5
Junction-to-case (top) thermal resistance (PW) RθJC(top) 41.3 °C/W 5
Junction-to-board thermal resistance (PW) RθJB 59.2 °C/W 5

CAD (KiCad official)

  • Symbol: GD65232PWR
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: gd65232pwr-etched.step / gd65232pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gd65232pwr.step / gd65232pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 3e57d0b9bc976176, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF