component
TP1564AL1-SR
Public Made by Adomby adom
UMW Operational Amplifier, SOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTP1564AL1-SR
UMW · Operational Amplifier · SOP-14
TP1564AL1-SR from UMW, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of op-amp channel A. Rail-to-rail output capable of sourcing/sinking up to ~100 mA short-circuit current. |
| 2 | -In A | input | Inverting input of op-amp channel A. Common-mode input range extends 100 mV beyond each rail (V- to V+). |
| 3 | +In A | input | Non-inverting input of op-amp channel A. Common-mode input range extends 100 mV beyond each rail (V- to V+). |
| 4 | +Vs | power_in | Positive supply rail. Operating range 2.5 V to 6.0 V; absolute maximum (+Vs)-(-Vs) = 7 V. Bypass with a local decoupling capacitor. |
| 5 | +In B | input | Non-inverting input of op-amp channel B. Common-mode input range extends 100 mV beyond each rail. |
| 6 | -In B | input | Inverting input of op-amp channel B. Common-mode input range extends 100 mV beyond each rail. |
| 7 | Out B | output | Output of op-amp channel B. Rail-to-rail output with ~100 mA short-circuit current capability. |
| 8 | Out C | output | Output of op-amp channel C. Rail-to-rail output with ~100 mA short-circuit current capability. |
| 9 | -In C | input | Inverting input of op-amp channel C. Common-mode input range extends 100 mV beyond each rail. |
| 10 | +In C | input | Non-inverting input of op-amp channel C. Common-mode input range extends 100 mV beyond each rail. |
| 11 | -Vs | power_in | Negative supply rail (typically ground in single-supply operation). Absolute maximum (+Vs)-(-Vs) = 7 V. |
| 12 | +In D | input | Non-inverting input of op-amp channel D. Common-mode input range extends 100 mV beyond each rail. |
| 13 | -In D | input | Inverting input of op-amp channel D. Common-mode input range extends 100 mV beyond each rail. |
| 14 | Out D | output | Output of op-amp channel D. Rail-to-rail output with ~100 mA short-circuit current capability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | SOP-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
TP1564AL1-SRTP1562AL1-SRTP1561A-TR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VS | 2.5 | 6 | V | 3 | ||
| Quiescent Current per Amplifier | IQ | 600 | 900 | μA | 3 | ||
| Input Offset Voltage | VOS | -3 | 3 | mV | VCM = 0V to 3V | 3 | |
| Power Supply Rejection Ratio | PSRR | 75 | 90 | dB | 3 | ||
| Open-loop Voltage Gain | Av | 80 | 100 | dB | RLOAD = 10kΩ | 3 | |
| Common Mode Rejection Ratio | CMRR | 70 | 100 | dB | VCM = 0V to 2.5V | 3 | |
| Maximum Output Voltage Swing | VOH, VOL | 3 | 15 | mV | RLOAD = 10kΩ | 3 | |
| Output Short-Circuit Current | ISC | 90 | 100 | mA | 3 | ||
| Input Offset Voltage Drift | VOS TC | 1 | μV/°C | TA = -40°C to 125°C | 3 | ||
| Input Bias Current | IB | 1 | pA | TA = 25 °C | 3 | ||
| Input Bias Current | IB | 25 | pA | TA = 85 °C | 3 | ||
| Input Offset Current | IOS | 1 | pA | 3 | |||
| Input Capacitance | CIN | 8 | pF | Differential Mode | 3 | ||
| Input Capacitance | CIN | 7 | pF | Common Mode | 3 | ||
| Channel Separation | Xtalk | 110 | dB | f = 1kHz, RL = 2kΩ | 3 | ||
| Gain-Bandwidth Product | GBW | 6 | MHz | 3 | |||
| Slew Rate | SR | 4.5 | V/μs | AV = 1, VOUT = 1.5V to 3.5V, CLOAD = 60pF, RLOAD = 1kΩ | 3 | ||
| Settling Time, 0.1% | tS | 0.8 | μs | AV = 1, 2V Step, CLOAD = 60pF, RLOAD = 1kΩ | 3 | ||
| Settling Time, 0.01% | tS | 1 | μs | 3 | |||
| Phase Margin | PM | 60 | ° | RLOAD = 1kΩ, CLOAD = 60pF | 3 | ||
| Gain Margin | GM | 15 | dB | RLOAD = 1kΩ, CLOAD = 60pF | 3 | ||
| Input Voltage Noise (0.1 Hz to 10 Hz) | EN | 8 | μVPP | f = 0.1Hz to 10Hz | 3 | ||
| Input Voltage Noise Density | eN | 19 | nV/√Hz | f = 1kHz | 3 | ||
| Input Current Noise | iN | 2 | fA/√Hz | f = 1kHz | 3 | ||
| Total Harmonic Distortion and Noise | THD+N | 0.003 | % | f = 1kHz, AV =1, RL = 2kΩ, VOUT = 1Vp-p | 3 | ||
| Supply Voltage (+VS)–(-VS) | (+VS)–(-VS) | 7 | V | 2 | |||
| Differential Input Voltage | -7 | 7 | V | 2 | |||
| Input Current | +IN, -IN | -10 | 10 | mA | Note 2 | 2 | |
| Maximum Junction Temperature | 150 | °C | 2 | ||||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec | 2 | |||
| ESD Human Body Model | HBM | 8 | kV | MIL-STD-883H Method 3015.8 | 2 | ||
| ESD Charged Device Model | CDM | 2 | kV | JEDEC-EIA/JESD22-C101E | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 120 | °C/W | SOP-14 package | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 36 | °C/W | SOP-14 package | 2 |
CAD (KiCad official)
- Symbol:
TP1564AL1-SR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
tp1564al1-sr-etched.step/tp1564al1-sr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp1564al1-sr.step/tp1564al1-sr.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tp1564al1-sr.step |
195 KB | You want the bare part, or you mark your own boards. |
tp1564al1-sr-etched.step |
2.4 MB | You want the part with TP1564AL1-SR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 608 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (9 pp, sha256
c80464a7cbbd6ce2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).