3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTS9222IYPT
STMicroelectronics · Precision OpAmps · TSSOP-8
TS9222IYPT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of amplifier 1, rail-to-rail, able to source or sink about 80 mA (Io 50 to 80 mA) and drive capacitive loads up to 500 pF. |
| 2 | In1- | input | Inverting input of amplifier 1; common-mode input range is VCC- -0.2 V to VCC+ +0.2 V. |
| 3 | In1+ | input | Non-inverting input of amplifier 1; common-mode input range is VCC- -0.2 V to VCC+ +0.2 V. |
| 4 | VCC- | power_in | Negative supply rail (0 V in the test conditions); input voltage must not go below VCC- -0.3 V. |
| 5 | In2+ | input | Non-inverting input of amplifier 2; common-mode input range is VCC- -0.2 V to VCC+ +0.2 V. |
| 6 | In2- | input | Inverting input of amplifier 2; common-mode input range is VCC- -0.2 V to VCC+ +0.2 V. |
| 7 | Out2 | output | Output of amplifier 2, rail-to-rail, able to source or sink about 80 mA (Io 50 to 80 mA) and drive capacitive loads up to 500 pF. |
| 8 | VCC+ | power_in | Positive supply rail; operating supply range 2.7 V to 12 V, absolute maximum 14 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (VCC+=3 V, Tamb=25°C) | Vio | 500 | µV | Table 3 header: VCC+=3 V, Vicm=VCC/2, Tamb=25°C | 5 | ||
| Input offset voltage over temperature (VCC+=3 V) | Vio | 900 | µV | Table 3 header: VCC+=3 V; Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input offset current (VCC+=3 V) | Iio | 1 | 30 | nA | Table 3 header: VCC+=3 V; Vout = VCC/2, Tmin ≤ Tamb ≤ Tmax | 5 | |
| Input bias current (VCC+=3 V, 25°C) | Iib | 15 | 55 | nA | Table 3 header: VCC+=3 V; Vout = VCC/2 | 5 | |
| Input bias current over temperature (VCC+=3 V) | Iib | 90 | nA | Table 3 header: VCC+=3 V; Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Common mode rejection ratio (VCC+=3 V, 25°C) | CMR | 65 | 85 | dB | Table 3 header: VCC+=3 V; Vicm from 0 to 3 V | 5 | |
| Common mode rejection ratio over temperature (VCC+=3 V) | CMR | 60 | dB | Table 3 header: VCC+=3 V; Vicm from 0 to 3 V; Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Supply voltage rejection ratio (VCC+=3 V, 25°C) | SVR | 75 | 90 | dB | Table 3 header: VCC+=3 V; VCC = 2.7 to 3.3 V | 5 | |
| Supply voltage rejection ratio over temperature (VCC+=3 V) | SVR | 70 | dB | Table 3 header: VCC+=3 V; VCC = 2.7 to 3.3 V; Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Large signal voltage gain RL=10 kΩ (VCC+=3 V) | Avd | 70 | 200 | V/mV | Table 3 header: VCC+=3 V; RL= 10 kΩ, Vout = 2 Vp-p | 5 | |
| Large signal voltage gain RL=600 Ω (VCC+=3 V, 25°C) | Avd | 15 | 35 | V/mV | Table 3 header: VCC+=3 V; RL = 600 Ω, Vout = 2 Vp-p | 5 | |
| Large signal voltage gain RL=600 Ω over temperature (VCC+=3 V) | Avd | 1.8 | V/mV | Table 3 header: VCC+=3 V; RL = 600 Ω, Vout = 2 Vp-p; Tmin ≤ Tamb ≤ Tmax | 5 | ||
| High level output voltage RL=10 kΩ (VCC+=3 V) | VOH | 2.9 | V | Table 3 header: VCC+=3 V; RL= 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| High level output voltage RL=600 Ω (VCC+=3 V) | VOH | 2.87 | V | Table 3 header: VCC+=3 V; RL = 600 Ω, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Low level output voltage RL=10 kΩ (VCC+=3 V) | VOL | 50 | mV | Table 3 header: VCC+=3 V; RL= 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Low level output voltage RL=600 Ω (VCC+=3 V) | VOL | 100 | mV | Table 3 header: VCC+=3 V; RL = 600 Ω, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Output short circuit current (VCC+=3 V) | Io | 50 | 80 | mA | Table 3 header: VCC+=3 V | 5 | |
| Supply current per channel (VCC+=3 V, 25°C) | ICC | 0.9 | 1.2 | Table 3 header: VCC+=3 V; No load, Vout = VCC/2 | 5 | ||
| Supply current per channel over temperature (VCC+=3 V) | ICC | 1.3 | Table 3 header: VCC+=3 V; Tmin ≤ Tamb ≤ Tmax | 5 | |||
| Slew rate (VCC+=3 V) | SR | 0.7 | 1.3 | V/μs | Table 3 header: VCC+=3 V | 5 | |
| Input offset voltage (VCC+=5 V, 25°C) | Vio | 500 | µV | Table 4 header: VCC+=5 V, Vicm=VCC/2, Tamb=25°C | 6 | ||
| Input offset voltage over temperature (VCC+=5 V) | Vio | 900 | µV | Table 4 header: VCC+=5 V; Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current (VCC+=5 V) | Iio | 1 | 30 | nA | Table 4 header: VCC+=5 V; Vout = VCC/2, Tmin ≤ Tamb ≤ Tmax | 6 | |
| Input bias current (VCC+=5 V, 25°C) | Iib | 15 | 55 | nA | Table 4 header: VCC+=5 V; Vout = VCC/2 | 6 | |
| Input bias current over temperature (VCC+=5 V) | Iib | 90 | nA | Table 4 header: VCC+=5 V; Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Common mode rejection ratio (VCC+=5 V, 25°C) | CMR | 65 | 85 | dB | Table 4 header: VCC+=5 V; Vicm from 0 to 5 V | 6 | |
| Common mode rejection ratio over temperature (VCC+=5 V) | CMR | 60 | dB | Table 4 header: VCC+=5 V; Vicm from 0 to 5 V; Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Supply voltage rejection ratio (VCC+=5 V, 25°C) | SVR | 75 | 90 | dB | Table 4 header: VCC+=5 V; VCC = 4.5 to 5.5 V | 6 | |
| Supply voltage rejection ratio over temperature (VCC+=5 V) | SVR | 70 | dB | Table 4 header: VCC+=5 V; VCC = 4.5 to 5.5 V; Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain RL=10 kΩ (VCC+=5 V) | Avd | 70 | 200 | V/mV | Table 4 header: VCC+=5 V; RL= 10 kΩ, Vout = 2 Vp-p | 6 | |
| Large signal voltage gain RL=600 Ω (VCC+=5 V, 25°C) | Avd | 24 | 35 | V/mV | Table 4 header: VCC+=5 V; RL = 600 Ω, Vout = 2 Vp-p | 6 | |
| Large signal voltage gain RL=600 Ω over temperature (VCC+=5 V) | Avd | 3 | V/mV | Table 4 header: VCC+=5 V; RL = 600 Ω, Vout = 2 Vp-p; Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High level output voltage RL=10 kΩ (VCC+=5 V) | VOH | 4.9 | V | Table 4 header: VCC+=5 V; RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High level output voltage RL=600 Ω (VCC+=5 V) | VOH | 4.85 | V | Table 4 header: VCC+=5 V; RL = 600 Ω, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Low level output voltage RL=10 kΩ (VCC+=5 V) | VOL | 50 | mV | Table 4 header: VCC+=5 V; RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Low level output voltage RL=600 Ω (VCC+=5 V) | VOL | 120 | mV | Table 4 header: VCC+=5 V; RL = 600 Ω, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Output short circuit current (VCC+=5 V) | Io | 50 | 80 | mA | Table 4 header: VCC+=5 V | 6 | |
| Supply current per channel (VCC+=5 V, 25°C) | Icc | 0.9 | 1.2 | Table 4 header: VCC+=5 V; No load, Vout = VCC/2 | 6 | ||
| Supply current per channel over temperature (VCC+=5 V) | Icc | 1.3 | Table 4 header: VCC+=5 V; Tmin ≤ Tamb ≤ Tmax | 6 | |||
| Slew rate (VCC+=5 V) | SR | 0.7 | 1.3 | V/μs | Table 4 header: VCC+=5 V | 6 | |
| Supply voltage | VCC | 2.7 | 12 | V | 4 | ||
| Operating free air temperature range | Toper | -40 | 125 | °C | 4 | ||
| Supply voltage | VCC | 14 | V | Voltages referenced to network ground | 3 | ||
| Differential input voltage | Vid | -1 | 1 | V | If Vid > ±1 V, input current must not exceed ±1 mA | 3 | |
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Maximum junction temperature | Tj | 150 | °C | 3 | |||
| ESD human body model (TS9222) | HBM | 2000 | V | Human body model, 100 pF / 1.5 kΩ | 3 | ||
| ESD machine model (TS9222) | MM | 120 | V | Machine model, 200 pF | 3 | ||
| ESD charged device model (TS9222) | CDM | 1500 | V | Charged device model | 3 | ||
| Latch-up immunity | 200 | mA | 3 | ||||
| Soldering temperature (10 s, unleaded version) | 260 | °C | 10 sec, unleaded version | 3 | |||
| Thermal resistance junction to ambient, TSSOP8 | Rthja | 120 | °C/W | Values are typical (note 4) | 3 |
CAD (KiCad official)
- Symbol:
TS9222IYPT - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ts9222iypt-etched.step/ts9222iypt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts9222iypt.step/ts9222iypt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (16 pp, sha256
0b0aa6adf14a8a1d, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).