3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F1503-E
Microchip Tech · MICROCHIP · TSSOP-14
PIC16F1503-E from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; PIC16F1503 operates from 2.3V to 5.5V. |
| 2 | RA5 | bidirectional | General purpose I/O with TTL input, also CLKIN external clock input (EC mode), T1CKI, NCO1CLK and CLC1IN1; weak pull-up and interrupt-on-change capable. |
| 3 | RA4 | bidirectional | General purpose I/O with AN3 analog input, CLKOUT (FOSC/4), T1G, and alternate-pin NCO1 and SDO outputs; weak pull-up and interrupt-on-change capable. |
| 4 | MCLR/VPP/RA3 | input | Input-only pin serving as RA3 general purpose input, active-low Master Clear with internal weak pull-up, VPP programming voltage, CLC1IN0, and alternate T1G and SS inputs. |
| 5 | RC5 | bidirectional | General purpose I/O with PWM1 output, CWG1A primary output and alternate CLC1 output. |
| 6 | RC4 | bidirectional | General purpose I/O with C2OUT comparator output, CLC2IN1 input and CWG1B complementary output. |
| 7 | RC3 | bidirectional | General purpose I/O with AN7 analog input, C1IN3-/C2IN3- comparator negative inputs, PWM2 output, CLC2IN0 input and SS slave select input. |
| 8 | RC2 | bidirectional | General purpose I/O with AN6 analog input, C1IN2-/C2IN2- comparator negative inputs and SDO SPI data output. |
| 9 | RC1 | bidirectional | General purpose I/O with AN5 analog input, C1IN1-/C2IN1- comparator negative inputs, PWM4 output, NCO1 output, and SDA I2C data (open drain) / SDI SPI data input. |
| 10 | RC0 | bidirectional | General purpose I/O with AN4 analog input, C2IN+ comparator positive input, CLC2 output, and SCL I2C clock (open drain) / SCK SPI clock. |
| 11 | RA2 | bidirectional | General purpose I/O with AN2 analog input, C1OUT, DACOUT2, T0CKI, INT external interrupt, PWM3, CLC1 output and CWG1FLT fault input. |
| 12 | RA1/ICSPCLK | bidirectional | General purpose I/O with AN1, VREF+ A/D positive reference input, C1IN0-/C2IN0- comparator negative inputs, and ICSPCLK serial programming clock. |
| 13 | RA0/ICSPDAT | bidirectional | General purpose I/O with AN0 analog input, C1IN+ comparator positive input, DACOUT1 DAC output, and ICSPDAT ICSP data I/O. |
| 14 | VSS | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-14 |
| Category | Embedded Processors & Controllers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (FOSC ≤ 16 MHz) | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz, PIC16F1503 | 268 | |
| Supply Voltage (FOSC ≤ 20 MHz) | VDD | 2.5 | 5.5 | V | FOSC ≤ 20 MHz, PIC16F1503 | 268 | |
| Operating Ambient Temperature (Extended) | TA | -40 | 125 | °C | Extended Temperature | 266 | |
| Voltage on VDD pin | VDD | -0.3 | 6.5 | V | PIC16F1503, with respect to VSS | 265 | |
| Voltage on MCLR pin | VMCLR | -0.3 | 9 | V | with respect to VSS | 265 | |
| Ambient temperature under bias | -40 | 125 | °C | 265 | |||
| Storage temperature | TSTG | -65 | 150 | °C | 265 | ||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 265 | |||
| Maximum current on VSS pin | 85 | mA | +85°C ≤ TA ≤ +125°C | 265 | |||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 265 | |||
| Maximum current on VDD pin | 85 | mA | +85°C ≤ TA ≤ +125°C | 265 | |||
| Current sunk by any standard I/O pin | 50 | mA | 265 | ||||
| Current sourced by any standard I/O pin | 50 | mA | 265 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 265 | ||
| Thermal Resistance Junction to Ambient | θJA | 100 | °C/W | 14-pin TSSOP package | 275 | ||
| Thermal Resistance Junction to Case | θJC | 24.4 | °C/W | 14-pin TSSOP package | 275 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 275 | |||
| RAM Data Retention Voltage | VDR | 1.7 | V | Device in Sleep mode | 268 | ||
| VDD Rise Rate | SVDD | 0.05 | V/ms | Ensures that the Power-on Reset signal is released properly. | 268 | ||
| Fixed Voltage Reference Voltage, 1x gain (1.024V nominal) | VFVR | -4 | 4 | % | VDD ≥ 2.5V, -40°C ≤ TA ≤ +85°C | 268 | |
| Supply Current, ECM 1 MHz | IDD | 115 | 190 | µA | FOSC = 1 MHz, External Clock (ECM), Medium Power mode, VDD = 5.0V | 270 | |
| Supply Current, ECM 4 MHz | IDD | 295 | 460 | µA | FOSC = 4 MHz, External Clock (ECM), Medium Power mode, VDD = 5.0V | 270 | |
| Supply Current, LFINTOSC 31 kHz | IDD | 17 | 36 | µA | FOSC = 31 kHz, LFINTOSC, -40°C ≤ TA ≤ +85°C, VDD = 5.0V | 270 | |
| Supply Current, HFINTOSC 500 kHz | IDD | 350 | 620 | µA | FOSC = 500 kHz, HFINTOSC, VDD = 5.0V | 270 | |
| Supply Current, HFINTOSC 8 MHz | IDD | 730 | 1200 | µA | FOSC = 8 MHz, HFINTOSC, VDD = 5.0V | 270 | |
| Supply Current, HFINTOSC 16 MHz | IDD | 1090 | 1700 | µA | FOSC = 16 MHz, HFINTOSC, VDD = 5.0V | 270 | |
| Supply Current, ECH 20 MHz | IDD | 1220 | 1800 | µA | FOSC = 20 MHz, External Clock (ECH), High-Power mode, VDD = 5.0V | 271 | |
| Supply Current, ECL 32 kHz | IDD | 16 | 36 | µA | FOSC = 32 kHz, External Clock (ECL), Low-Power mode, VDD = 5.0V | 271 | |
| Supply Current, ECL 500 kHz | IDD | 44 | 74 | µA | FOSC = 500 kHz, External Clock (ECL), Low-Power mode, VDD = 5.0V | 271 | |
| Base Power-down Current, Low-Power Sleep (max at +85°C) | IPD | 0.4 | 6 | µA | VDD = 5.0V, WDT, BOR, FVR and SOSC disabled, Low-Power Sleep mode (max at +85°C) | 272 | |
| Base Power-down Current, Low-Power Sleep (max at +125°C) | IPD | 0.4 | 15 | µA | VDD = 5.0V, WDT, BOR, FVR and SOSC disabled, Low-Power Sleep mode (max at +125°C) | 272 | |
| Base Power-down Current, Normal-Power Sleep (max at +125°C) | IPD | 11.5 | 26 | µA | VDD = 5.0V, Normal-Power Sleep mode, VREGPM = 0 (max at +125°C) | 272 | |
| WDT Current (max at +125°C) | 0.64 | 22 | µA | VDD = 5.0V | 272 | ||
| FVR Current (max at +125°C) | 20 | 39 | µA | VDD = 5.0V | 272 | ||
| BOR Current (max at +125°C) | 8 | 40 | µA | VDD = 5.0V | 272 | ||
| LPBOR Current (max at +125°C) | 0.45 | 17 | µA | VDD = 5.0V | 272 | ||
| ADC Current, no conversion (max at +125°C) | 0.45 | 16 | µA | VDD = 5.0V, No conversion in progress | 273 | ||
| ADC Current, conversion in progress | 280 | µA | VDD = 5.0V, Conversion in progress | 273 | |||
| Comparator Current, CxSP = 0 (max at +125°C) | 19 | 40 | µA | VDD = 5.0V, CxSP = 0 | 273 | ||
| Input Low Voltage, TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 274 | ||
| Input Low Voltage, SMbus levels | VIL | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 274 | ||
| Input High Voltage, TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 274 | ||
| Input High Voltage, SMbus levels | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 274 | ||
| Input Leakage Current, I/O Ports | IIL | -125 | 125 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C | 274 | |
| Input Leakage Current, I/O Ports | IIL | -1000 | 1000 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 125°C | 274 | |
| Input Leakage Current, MCLR | IIL | -200 | 200 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C | 274 | |
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 274 |
| Weak Pull-up Current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 274 |
| Output Low Voltage, I/O Ports | VOL | 0.6 | V | IOL = 8 mA, VDD = 5V; IOL = 6 mA, VDD = 3.3V; IOL = 1.8 mA, VDD = 1.8V | 274 | ||
| Capacitive Loading on Output Pins, All I/O pins | CIO | 50 | pF | 274 | |||
| Voltage on MCLR/VPP pin (programming) | VIHH | 8 | 9 | V | (Note 2) | 275 | |
| External CLKIN Frequency (ECH) | FOSC | 20 | MHz | External Clock (ECH) | 277 | ||
| Brown-out Reset Voltage, BORV = 0 | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 281 |
| Brown-out Reset Voltage, BORV = 1 (PIC16F1503) | VBOR | 2.35 | 2.45 | 2.58 | V | BORV = 1 (PIC16F1503) | 281 |
| Low-Power Brown-Out Reset Voltage | VLPBOR | 1.8 | 2.1 | 2.5 | V | LPBOR = 1 | 281 |
| Power-up Timer Period | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 281 |
| Low-Power Watchdog Timer Time-out Period | TWDTLP | 10 | 16 | 27 | ms | VDD = 3.3V-5V, 1:512 Prescaler used | 281 |
| ADC Integral Error | EIL | 1 | 1.7 | LSb | VREF = 3.0V | 284 | |
| ADC Offset Error | EOFF | 1 | 2.5 | LSb | VREF = 3.0V | 284 | |
| Comparator Input Offset Voltage | VIOFF | 7.5 | 60 | mV | CxSP = 1, VICM = VDD/2 | 286 | |
| Power-on Reset Release Voltage | VPOR | 1.6 | V | 268 |
CAD (KiCad official)
- Symbol:
PIC16F1503-E - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
pic16f1503-e-etched.step/pic16f1503-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1503-e.step/pic16f1503-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (352 pp, sha256
3f6639e534c0589b, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).