component
RBH-10SR750JT
Public Made by Adomby adom
FH Guangdong Fenghua Advanced Tech Current Sense Resistors / Shunt Resistors, 2010. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRBH-10SR750JT
FH Guangdong Fenghua Advanced Tech · Current Sense Resistors / Shunt Resistors · 2010
RBH-10SR750JT from FH Guangdong Fenghua Advanced Tech, in a 2010. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FH Guangdong Fenghua Advanced Tech |
| Package | 2010 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Solderability (wetting coverage) | 95 | % | Lead-free solder bath at 245±5°C for 3s±0.3s (IEC 60115-1 4.17) | 3 | |||
| Insulation resistance | 1000 | MΩ | Apply DC 100V 15V between substrate and terminations for 1min | 4 | |||
| Max. overload voltage (2010) | 400 | V | AC RMS, ramped at approx. 100V/s, held 60s±5s between substrate and terminations | 4 | |||
| Resistance change, substrate bending | ΔR | 1 | %R+0.5mΩ | Bending distance 2mm (2010/2512), duration 60s±5s | 3 | ||
| Resistance change, resistance to soldering heat | ΔR | 1 | %R+0.5mΩ | Lead-free solder bath at 270±5°C for 10s±1s | 3 | ||
| Resistance change, rapid change of temperature | ΔR | 1 | %R+0.5mΩ | -55°C (30min) / normal temperature (5min) / 155°C (30min), 300 cycles | 3 | ||
| Resistance change, short time overload | ΔR | 1 | %R+0.5mΩ | 2.5 times rated voltage for 5s | 3 | ||
| Resistance change, damp heat | ΔR | 3 | %R+0.5mΩ | 40±2°C, 93%±3%RH, 1000h, 1.5h ON / 0.5h OFF | 3 | ||
| Resistance change, steady state damp heat | ΔR | 1 | %R+0.5mΩ | 40±2°C, 93%±3%RH, 1000h, rated voltage for 1.5h ON / 0.5h OFF | 3 | ||
| Resistance change, endurance at 70°C | ΔR | 2 | %R+0.5mΩ | 70±2°C, 1000h, rated voltage 1.5h ON / 0.5h OFF | 4 | ||
| Resistance change, endurance at upper category temperature | ΔR | 1 | %R+0.5mΩ | 155±2°C, 1000h | 4 | ||
| Resistance change, component solvent resistance | ΔR | 1 | %R+0.5mΩ | Iso-propyl alcohol (IPA) at 23±5°C, 10h | 4 | ||
| Resistance change, operation at low temperature | ΔR | 1 | %R+0.5mΩ | -55±5°C, 1h without load, rated voltage 45min, 15min without load | 4 | ||
| Operating temperature range | -55 | 155 | °C | Ambient temperature; rated load derated above 70°C per figure | 2 | ||
| Temperature coefficient of resistance | TCR | 1000 | ppm/°C | TCR code S = 1000 ppm/°C (per T.C.R code legend) | 3 | ||
| Resistance tolerance | -5 | 5 | % | Tolerance code J (5%) | 1 |
CAD (KiCad official)
- Symbol:
RBH-10SR750JT - Footprint:
Resistor_SMD:R_2010_5025Metric - 3D model: 2010 (KiCad packages3D, STEP)
- 3D model files:
rbh-10sr750jt-etched.step/rbh-10sr750jt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rbh-10sr750jt.step/rbh-10sr750jt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FH Guangdong Fenghua Advanced Tech datasheet (13 pp, sha256
55ea93cfce76699f, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).