3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownZL40217LDG1
Microchip Tech · Clock Buffers, Drivers · QFN-32-EP(5x5)
ZL40217LDG1 from Microchip Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | vdd_core | power_in | Positive supply voltage, 2.5 VDC or 3.3 VDC nominal. |
| 2 | gnd | power_in | Ground, 0 V. |
| 3 | clk_p | input | Differential (or single-ended) analog clock input; all supported input configurations are described in the Clock Inputs section. |
| 4 | vt | passive | On-chip input termination node (analog), the center tap between the internal 50 Ohm termination resistors; its use depends on the input signal type as detailed in section 3.1. |
| 5 | ctrl | input | Digital control for on-chip input termination: 0 selects DC-coupled LVPECL or LVDS modes and 1 selects AC-coupled differential modes; the pin is internally pulled down to GND. |
| 6 | clk_n | input | Differential (or single-ended) analog clock input; all supported input configurations are described in the Clock Inputs section. |
| 7 | gnd | power_in | Ground, 0 V. |
| 8 | vdd_core | power_in | Positive supply voltage, 2.5 VDC or 3.3 VDC nominal. |
| 9 | vdd | power_in | Positive supply voltage, 2.5 VDC or 3.3 VDC nominal. |
| 10 | NC | unconnected | No connection; leave unconnected. |
| 11 | NC | unconnected | No connection; leave unconnected. |
| 12 | NC | unconnected | No connection; leave unconnected. |
| 13 | out5_n | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 14 | out5_p | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 15 | out4_n | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 16 | out4_p | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 17 | out3_n | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 18 | out3_p | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 19 | vdd | power_in | Positive supply voltage, 2.5 VDC or 3.3 VDC nominal. |
| 20 | gnd | power_in | Ground, 0 V. |
| 21 | gnd | power_in | Ground, 0 V. |
| 22 | vdd | power_in | Positive supply voltage, 2.5 VDC or 3.3 VDC nominal. |
| 23 | out2_n | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 24 | out2_p | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 25 | out1_n | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 26 | out1_p | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 27 | out0_n | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 28 | out0_p | output | Differential LVDS clock output (analog output), part of the six differential outputs. |
| 29 | NC | unconnected | No connection; leave unconnected. |
| 30 | NC | unconnected | No connection; leave unconnected. |
| 31 | NC | unconnected | No connection; leave unconnected. |
| 32 | vdd | power_in | Positive supply voltage, 2.5 VDC or 3.3 VDC nominal. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-32-EP(5x5) |
| Category | Clock and Timing |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD_R | -0.5 | 4.6 | V | 16 | ||
| Soldering temperature | T | 260 | °C | 16 | |||
| Storage temperature | TST | -55 | 125 | °C | 16 | ||
| Junction temperature | Tj | 125 | °C | 16 | |||
| Input capacitance each pin | Cp | 500 | fF | 16 | |||
| Supply voltage 2.5 V mode | VDD25 | 2.375 | 2.5 | 2.625 | V | 16 | |
| Supply voltage 3.3 V mode | VDD33 | 3.135 | 3.3 | 3.465 | V | 16 | |
| Operating temperature | TA | -40 | 25 | 85 | °C | 16 | |
| Supply current LVDS drivers loaded | Idd_load | 97 | mA | all outputs are active | 16 | ||
| CMOS control logic Input leakage current | IIL | 1 | µA | VI = VDD or 0 V | 16 | ||
| Differential common mode voltage (2.5 V) | VICM | 1.1 | 1.6 | V | for 2.5 V | 16 | |
| Differential common mode voltage (3.3 V) | VICM | 1.1 | 2 | V | for 3.3 V | 16 | |
| Differential input voltage difference | VID | 0.25 | 1 | V | 16 | ||
| Differential input resistance | VIR | 80 | 100 | 120 | ohm | 16 | |
| LVDS output differential voltage | VOD | 0.25 | 0.3 | 0.4 | V | VOD measured between 125 and 750 MHz | 16 |
| LVDS Common Mode voltage | VCM | 1.1 | 1.25 | 1.375 | V | 16 | |
| Maximum Operating Frequency | 1/tp | 750 | MHz | 17 | |||
| Input to output clock propagation delay | tpd | 0 | 1 | 2 | ns | 17 | |
| Output to output skew | tout2out | 80 | 150 | ps | 17 | ||
| Part to part output skew | tpart2part | 120 | 300 | ps | 17 | ||
| Output clock Duty Cycle degradation | tPWH/ tPWL | -5 | 0 | 5 | % | 17 | |
| LVDS Output slew rate | rSL | 0.55 | V/ns | 17 | |||
| Junction to Ambient Thermal Resistance (still air) | ΘJA | 37.4 | oC/W | Still Air | 20 | ||
| Junction to Ambient Thermal Resistance (1 m/s) | ΘJA | 33.1 | oC/W | 1 m/s | 20 | ||
| Junction to Ambient Thermal Resistance (2 m/s) | ΘJA | 31.5 | oC/W | 2 m/s | 20 | ||
| Junction to Case Thermal Resistance | ΘJC | 24.4 | oC/W | 20 | |||
| Junction to Board Thermal Resistance | ΘJB | 19.5 | oC/W | 20 | |||
| Maximum Junction Temperature | Tjmax | 125 | oC | 20 | |||
| Maximum Ambient Temperature | TA | 85 | oC | 20 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | ZL40217LDF1 32 Pin QFN Tape and Reel Matte Tin | 1 |
CAD (KiCad official)
- Symbol:
ZL40217LDG1 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
zl40217ldg1-etched.step/zl40217ldg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zl40217ldg1.step/zl40217ldg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
1138b6186ca723b6, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).