component
24FC16T-I
Public Made by Adomby adom
Microchip Tech EEPROM, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown24FC16T-I
Microchip Tech · EEPROM · SOT-23-5
24FC16T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial Clock input used to synchronize data transfer to and from the device. |
| 2 | VSS | power_in | Ground. |
| 3 | SDA | bidirectional | Serial Address/Data I/O, an open-drain bidirectional pin that requires a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz and 1 MHz). |
| 4 | VCC | power_in | Power supply; 1.7V-5.5V for 24FC16 (2.5V-5.5V for 24LC16B). |
| 5 | WP | input | Write-Protect input that must be tied to VSS (normal read/write of entire memory 000-7FF) or to VCC (write operations inhibited, reads unaffected). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Memory |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| ESD protection on all pins | 4 | kV | 3 | ||||
| Supply voltage (Industrial) | VCC | 1.7 | 5.5 | V | Industrial (I): TA = -40°C to +85°C | 3 | |
| High-level input voltage | VIH | 0.7 | V | min is 0.7 VCC | 3 | ||
| Low-level input voltage | VIL | 0.3 | V | max is 0.3 VCC | 3 | ||
| Hysteresis of Schmitt trigger inputs | VHYS | 0.05 | V | min is 0.05 VCC; Note 1 | 3 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 | ||
| Input leakage current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output leakage current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin capacitance | CIN, COUT | 10 | pF | VCC = 5.0V (Note 1), TA = 25°C, FCLK = 1 MHz | 3 | ||
| Operating current, write | ICCWRITE | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Operating current, read | ICCREAD | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Standby current | ICCS | 1 | µA | SDA = SCL = VCC, WP = VSS, I-Temp. | 3 | ||
| Clock frequency | FCLK | 1000 | kHz | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| Clock high time | THIGH | 260 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| Clock low time | TLOW | 500 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| SDA and SCL rise time | TR | 1000 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) (Note 1) | 4 | ||
| SDA and SCL fall time | TF | 300 | ns | Note 1 | 4 | ||
| Start condition hold time | THD:STA | 250 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| Start condition setup time | TSU:STA | 250 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| Data input hold time | THD:DAT | 0 | ns | Note 2 | 4 | ||
| Data input setup time | TSU:DAT | 50 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| Stop condition setup time | TSU:STO | 250 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| WP setup time | TSU:WP | 600 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| WP hold time | THD:WP | 600 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| Output valid from clock | TAA | 450 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) (Note 2) | 4 | ||
| Bus free time | TBUF | 500 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 | ||
| Output fall time from VIH min to VIL max | TOF | 250 | ns | 2.5V ≤ VCC ≤ 5.5V (Notes 1, 3 and 4); min is 20+0.1CB | 5 | ||
| Input filter spike suppression (SDA and SCL) | TSP | 100 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) (Note 1) | 5 | ||
| Write cycle time (byte or page) | TWC | 5 | ms | 5 | |||
| Endurance | 1e+06 | cycles | +25°C, 5.5V, Page Mode (Note 4) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 26 |
CAD (KiCad official)
- Symbol:
24FC16T-I - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
24fc16t-i-etched.step/24fc16t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24fc16t-i.step/24fc16t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (49 pp, sha256
00300b5fbb858585, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).