3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP73837-FCI/UN
Microchip Tech · Battery Management ICs · MSOP-10
MCP73837-FCI from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VAC | power_in | AC adapter supply input; a supply of VREG + 0.3V to 6V is recommended, with at least 4.7 µF bypass to VSS, and it dominates the regulated charge current (max 1A) when the USB port is also present. |
| 2 | VUSB | power_in | USB port supply input; a supply of VREG + 0.3V to 6V is recommended, with at least 1 µF bypass to VSS, and it charges the battery directly when no VAC supply is available. |
| 3 | STAT1 | output | Open-drain charge status output 1 for connecting an LED, or with a pull-up resistor for interfacing to a host microcontroller. |
| 4 | STAT2 | output | Open-drain charge status output 2 for connecting an LED, or with a pull-up resistor for interfacing to a host microcontroller. |
| 5 | VSS | power_in | Battery management 0V reference; connect to the negative terminal of the battery and input supply. |
| 6 | PROG1 | bidirectional | AC adapter charge current set by a resistor to VSS, also the precondition and termination set point and the charge control enable; shuts down above 70 kΩ and enters Stand-By mode when floating. |
| 7 | PROG2 | input | USB port current regulation digital input where logic Low selects 1 unit load and logic High selects 5 unit loads, also the USB termination set point; the device enters Stand-By mode when floating. |
| 8 | PG | output | Power-Good status open-drain output (MCP73837 only) for an LED or a pull-up resistor to a host microcontroller to indicate input power supply presence. |
| 9 | THERM | bidirectional | Battery temperature monitoring input with 50 µA internal bias current source for a typical 10 kΩ NTC thermistor, also the system test (LDO) mode input. |
| 10 | VBAT | power_in | Battery positive input and output connection to the Li-Ion/Li-Polymer cell, bypassed to VSS with at least 1 µF to ensure loop stability when the battery is disconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | Power Supply Chip |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
MCP73837-FCI - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
mcp73837-fci-etched.step/mcp73837-fci-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp73837-fci.step/mcp73837-fci.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (36 pp, sha256
4295b4c7fb065f5c, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is MCP73837-FCI/UN. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP73837-FCI/MF