3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownREG1117
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-4
REG1117 from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | power_in | Ground terminal on fixed-voltage models and the Adj. feedback terminal on adjustable models, where the output is set by R1 and R2 with about 50µA typical adjustable pin current (120µA max at IO=10mA). |
| 2 | VOUT | power_out | Regulated output that needs an output capacitor, with a 10µF tantalum recommended and ESR below 0.5Ω, and it sources up to 800mA (REG1117) or 1A (REG1117A). |
| 3 | VIN | power_in | Unregulated input with an absolute maximum of +15V, and dropout is 1.2V max at 800mA for REG1117 or 1.3V max at 1A for REG1117A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-4 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (adjustable), IO=10mA | 1.238 | 1.25 | 1.262 | V | IO = 10mA, VIN − VO = 2V | 4 | |
| Reference voltage (adjustable), over temperature | 1.225 | 1.25 | 1.28 | V | See Note 1: IO = 10 to 800mA, VIN − VO = 1.4 to 10V | 4 | |
| Current limit, REG1117 models | 800 | 950 | 1200 | mA | VIN − VO = 5V | 5 | |
| Dropout voltage, all models | 1 | 1.1 | V | IO = 100mA | 4 | ||
| Dropout voltage, all models | 1.05 | 1.15 | V | See Note 1: IO = 500mA | 4 | ||
| Dropout voltage, REG1117 models | 1.1 | 1.2 | V | IO = 800mA | 4 | ||
| Line regulation, REG1117 (adjustable) | 0.1 | 0.4 | % | IO = 10mA, VIN − VO = 1.5 to 13.75V | 4 | ||
| Load regulation, REG1117 (adjustable) | 0.1 | 0.4 | % | IO = 10 to 800mA, VIN − VO = 3V | 4 | ||
| Minimum load current, adjustable models | 1.7 | 5 | mA | VIN − VO = 13.75V | 5 | ||
| Adjustable pin current | 50 | 120 | µA | IO = 10mA, VIN − VO = 1.4 to 10V | 5 | ||
| Adjustable pin current change vs load current, REG1117 | 0.5 | 5 | µA | IO = 10mA to 800mA, VIN − VO = 1.4 to 10V | 5 | ||
| Thermal regulation, all models | 0.01 | 0.1 | %/W | 30ms pulse | 5 | ||
| Input voltage | 15 | V | 2 | ||||
| Operating junction temperature range | TJ | -40 | 125 | °C | 2 | ||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Lead temperature | 300 | °C | Soldering, 10s | 2 | |||
| Ripple rejection, all models | 62 | dB | f = 120Hz, VIN − VOUT = 3V + 1VPP ripple | 5 | |||
| Temperature drift, adjustable models | 2 | % | TJ = 0°C to +125°C | 5 | |||
| Long-term stability, all models | 0.3 | % | TA = 125°C, 1000Hr | 5 | |||
| Output noise, rms, all models | 0.003 | % | f = 10Hz to 10kHz | 5 | |||
| Thermal resistance junction-to-case at tab, 3-lead SOT-223 | JC | 15 | °C/W | Junction-to-case at tab | 5 | ||
| Thermal shutdown activation temperature | TJ | 165 | °C | Approximately | 8 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 46 | °C/W | Total PC board area 2500mm2; topside copper 2500mm2; backside copper 2500mm2 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 47 | °C/W | Total PC board area 2500mm2; topside copper 1250mm2; backside copper 2500mm2 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 49 | °C/W | Total PC board area 2500mm2; topside copper 950mm2; backside copper 2500mm2 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 51 | °C/W | Total PC board area 2500mm2; topside copper 2500mm2; backside copper 0 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 53 | °C/W | Total PC board area 2500mm2; topside copper 1800mm2; backside copper 0 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 55 | °C/W | Total PC board area 1600mm2; topside copper 600mm2; backside copper 1600mm2 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 58 | °C/W | Total PC board area 2500mm2; topside copper 1250mm2; backside copper 0 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 59 | °C/W | Total PC board area 2500mm2; topside copper 915mm2; backside copper 0 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 67 | °C/W | Total PC board area 1600mm2; topside copper 600mm2; backside copper 0 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 72 | °C/W | Total PC board area 900mm2; topside copper 340mm2; backside copper 900mm2 | 10 | ||
| Thermal resistance junction-to-ambient, SOT-223 board configuration | JA | 85 | °C/W | Total PC board area 900mm2; topside copper 340mm2; backside copper 0 | 10 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | conduction through its copper leads, especially the large | 10 |
CAD (KiCad official)
- Symbol:
REG1117 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
reg1117-etched.step/reg1117-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);reg1117.step/reg1117.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
9612deef2bd34399, retrieved 2026-11-13, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).