3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPT1255-SO1R
3PEAK · CAN Transceivers · SOP-8
TPT1255-SO1R from 3PEAK, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | CAN transmit data input: LOW drives the bus dominant and HIGH releases it recessive, with VIH min 2 V and VIL max 0.8 V for the TPT1255. |
| 2 | GND | power_in | Ground reference pin for the transceiver. |
| 3 | VCC | power_in | Transceiver 5 V supply, specified at 4.5 V to 5.5 V (absolute maximum -0.3 V to 7 V). |
| 4 | RXD | output | CAN receive data output: LOW for dominant and HIGH for recessive bus states, with output current limited to -2 mA (source) and 2 mA (sink) under recommended conditions and 8 mA absolute maximum. |
| 5 | NC | unconnected | Not connected on the TPT1255, so it cannot be used for I/O level shifting and the device supports only 5 V I/O. |
| 6 | CANL | bidirectional | Low-level CAN bus input/output line, with bus pin protection from -42 V to +42 V. |
| 7 | CANH | bidirectional | High-level CAN bus input/output line, with bus pin protection from -42 V to +42 V. |
| 8 | S | input | Silent (listen-only) mode control, active high: HIGH disables the transmitter and releases the bus to recessive, LOW selects normal mode, with VIH min 2 V and VIL max 0.8 V for the TPT1255. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Power Supply (recommended) | VCC | 4.5 | 5.5 | V | 7 | ||
| IOH(RXD) RXD terminal high-level output current | IOH(RXD) | -2 | mA | 7 | |||
| IOL(RXD) RXD terminal low-level output current | IOL(RXD) | 2 | mA | 7 | |||
| TA Operating ambient temperature | TA | -40 | 125 | °C | 7 | ||
| VCC 5-V bus supply voltage range | VCC | -0.3 | 7 | V | 6 | ||
| VBUS CAN bus I/O voltage range (CANH, CANL) | VBUS | -42 | 42 | V | 6 | ||
| Logic input terminal voltage range (TXD, S) | V(Logic_Input) | -0.3 | 7 | V | 6 | ||
| Logic output terminal voltage range (RXD) | V(Logic_Output) | -0.3 | 7 | V | 6 | ||
| RXD (receiver) output current | IO_RXD | -8 | 8 | mA | 6 | ||
| Maximum junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 6 | ||
| Normal mode (dominant) supply current, RL = 60 Ω | ICC | 50 | 70 | mA | TXD = 0 V, RL = 60 Ω, CL = open, RCM = open, S = 0 V | 8 | |
| Normal mode (dominant) supply current, RL = 50 Ω | ICC | 52 | 80 | mA | TXD = 0 V, RL = 50 Ω, CL = open, RCM = open, S = 0 V | 8 | |
| Normal mode (dominant, bus fault) supply current | ICC | 73 | 150 | mA | TXD = 0 V, S = 0 V, CANH = CANL = −3 /+18V, RL = open, CL = open, RCM = open | 8 | |
| Normal mode (recessive) supply current | ICC | 1.2 | 2.5 | mA | TXD = VIO, RL = 50 Ω, CL = open, RCM = open, S = 0 V | 8 | |
| Silent mode supply current | ICC | 1.2 | 2.5 | mA | TXD = VIO, RL = 50 Ω, CL = open, RCM = open, S = VCC | 8 | |
| IIO current, normal and silent modes | IIO | 73 | 200 | µA | RXD Floating, TXD = S = 0 or VIO | 8 | |
| Rising undervoltage detection on VCC for protected mode | UVVCC | 4 | 4.4 | V | 8 | ||
| Falling undervoltage detection on VCC for protected mode | UVVCC | 3.6 | 3.9 | 4.2 | V | 8 | |
| Pin-S VIH high-level input voltage (TPT1255) | VIH | 2 | V | 8 | |||
| Pin-S VIL low-level input voltage (TPT1255) | VIL | 0.8 | V | 8 | |||
| Pin-S IIL low-level input leakage current | IIL | -1 | 0 | 1 | µA | S = 0 V, VCC= VIO= 5.5 V | 8 |
| Pin-S unpowered leakage current | Ilkg(OFF) | -1 | 0 | 1 | µA | S = 5.5 V, VCC= VIO= 0 V | 8 |
| Pin-TXD VIH high-level input voltage (TPT1255) | VIH | 2 | V | 8 | |||
| Pin-TXD VIL low-level input voltage (TPT1255) | VIL | 0.8 | V | 8 | |||
| Pin-TXD IIH high-level input leakage current | IIH | -2.5 | 0 | 1 | µA | S = VCC or VIO= 5.5 V | 9 |
| Pin-TXD IIL low-level input leakage current | IIL | -100 | -63 | -7 | µA | S = 0 V, VCC= VIO= 5.5 V | 9 |
| Pin-TXD unpowered leakage current | Ilkg(OFF) | -1 | 0 | 1 | µA | TXD = 5.5 V, VCC= VIO= 0 V | 9 |
| Pin-RXD VOH high-level output voltage (TPT1255) | VOH | 4 | 4.6 | V | IO= −2 mA | 9 | |
| Pin-RXD VOL low-level output voltage (TPT1255) | VOL | 0.2 | 0.4 | V | IO= +2 mA | 9 | |
| Pin-RXD unpowered leakage current | Ilkg (OFF) | -1 | 0 | 1 | µA | RXD = 5.5 V, VCC= 0 V, VIO = 0 V | 9 |
| Bus output voltage (dominant) CANH | VO(DOM) | 2.75 | 4.5 | V | TXD = 0 V, S = 0 V, 45 Ω ≤ RL≤ 65 Ω, CL= open, RCM= open | 9 | |
| Bus output voltage (dominant) CANL | VO(DOM) | 0.5 | 2.25 | V | 9 | ||
| Bus output voltage (recessive) CANH | VO(REC) | 2 | 3 | V | TXD = VCC, VIO= VCC, S = VCC or 0 V(2), RL= open (no load), RCM = open | 9 | |
| Differential output voltage (dominant), 45 Ω ≤ RL < 50 Ω | VOD(DOM) | 1.4 | 3 | V | TXD = 0 V, S = 0 V, 45 Ω ≤ RL< 50 Ω, CL= open, RCM= open | 9 | |
| Differential output voltage (dominant), 50 Ω ≤ RL ≤ 65 Ω | VOD(DOM) | 1.5 | 3 | V | TXD = 0 V, S = 0 V, 50 Ω ≤ RL≤ 65 Ω, CL= open, RCM= open | 9 | |
| Differential output voltage (dominant), RL = 2240 Ω | VOD(DOM) | 1.5 | 5 | V | TXD = 0 V, S =0 V, RL = 2240 Ω, CL = open, RCM = open, VCC = 4.5 V~5.25 V | 9 | |
| Differential output voltage (recessive), RL = 60 Ω | VOD(REC) | -120 | 12 | mV | TXD = VCC, S = 0 V, RL = 60 Ω, CL = open, RCM = open | 9 | |
| Differential output voltage (recessive), RL open | VOD(REC) | -50 | 50 | mV | TXD = VCC, S = 0 V, RL = open (no load), CL = open, RCM = open | 9 | |
| DC output symmetry (dominant or recessive) | VSYM_DC | -0.4 | 0.4 | V | S = 0 V, RL= 60 Ω, CL= open, RCM= open | 10 | |
| Short-circuit steady-state output current, recessive | IOS(SS_REC) | -5 | 5 | mA | −27 V ≤ VBUS ≤ 32 V, Where VBUS = CANH = CANL, TXD = VCC | 10 | |
| Common mode range, normal mode | VCM | -30 | 30 | V | S = 0 or VCC or VIO | 10 | |
| Positive-going input threshold voltage, all modes (first block) | VIT+ | 900 | mV | S = 0 or VCCor VIO | 10 | ||
| Negative-going input threshold voltage, all modes (first block) | VIT- | 500 | mV | −20 V ≤ VCM≤ +20 V | 10 | ||
| Positive-going input threshold voltage, all modes (second block) | VIT+ | 1000 | mV | S = 0 or VCCor VIO | 10 | ||
| Negative-going input threshold voltage, all modes (second block) | VIT- | 400 | mV | −30 V ≤ VCM≤ +30 V | 10 | ||
| Differential input resistance | RID | 30 | 80 | kΩ | TXD = VCC= VIO= 5 V | 10 | |
| Input resistance (CANH or CANL) | RIN | 15 | 40 | kΩ | S = 0 V, −30 V ≤ VCM≤ +30 V | 10 | |
| Input resistance matching | RIN(M) | -1 | 1 | % | VCANH = VCANL = 5 V | 10 | |
| Total loop delay TXD to RXD, recessive to dominant | tPROP(LOOP1) | 100 | 160 | ns | S = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF | 11 | |
| Total loop delay TXD to RXD, dominant to recessive | tPROP(LOOP2) | 110 | 175 | ns | 11 | ||
| Mode change time, normal to silent or silent to normal | tMODE | 0.15 | 10 | µs | 11 | ||
| Dominant timeout | tTXD_DTO | 1.2 | 3.8 | ms | S = 0 V, RL= 60 Ω, CL= open | 11 | |
| Bit time on CAN bus output pins, tBIT(TXD) = 500 ns | tBIT(BUS) | 435 | 530 | ns | tBIT(TXD) = 500 ns, all devices; S = 0 V, RL= 60 Ω, CL = 100 pF, CL(RXD) = 15 pF | 11 | |
| Bit time on RXD output pins, tBIT(TXD) = 500 ns | tBIT(RXD) | 400 | 550 | ns | tBIT(TXD) = 500 ns, all devices | 12 | |
| Receiver timing symmetry, tBIT(TXD) = 500 ns | ΔtREC | -65 | 40 | ns | tBIT(TXD) = 500 ns, all devices | 12 | |
| Thermal resistance, junction-to-ambient (SOP8) | θJA | 118 | °C/W | 7 | |||
| Thermal resistance, junction-to-case (SOP8) | θJC | 48 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
TPT1255-SO1R - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tpt1255-so1r-etched.step/tpt1255-so1r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpt1255-so1r.step/tpt1255-so1r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (20 pp, sha256
febe9542a5a5db47, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).