component
TLC084QPWPRQ1
Public Made by Adomby adom
Texas Instruments Operational Amplifier, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLC084QPWPRQ1
Texas Instruments · Operational Amplifier · HTSSOP-20-EP
TLC084QPWPRQ1 from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier channel 1. |
| 2 | 1IN- | input | Inverting input of amplifier channel 1; recommended common-mode input range is GND to VDD − 2 V. |
| 3 | 1IN+ | input | Non-inverting input of amplifier channel 1; recommended common-mode input range is GND to VDD − 2 V. |
| 4 | VDD | power_in | Positive (highest) power supply; 4.5 V to 16 V single supply (±2.25 V to ±8 V dual supply), absolute maximum 17 V. |
| 5 | 2IN+ | input | Non-inverting input of amplifier channel 2; recommended common-mode input range is GND to VDD − 2 V. |
| 6 | 2IN- | input | Inverting input of amplifier channel 2; recommended common-mode input range is GND to VDD − 2 V. |
| 7 | 2OUT | output | Output of amplifier channel 2. |
| 8 | NC | unconnected | No internal connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | NC | unconnected | No internal connection. |
| 11 | NC | unconnected | No internal connection. |
| 12 | NC | unconnected | No internal connection. |
| 13 | NC | unconnected | No internal connection. |
| 14 | 3OUT | output | Output of amplifier channel 3. |
| 15 | 3IN- | input | Inverting input of amplifier channel 3; recommended common-mode input range is GND to VDD − 2 V. |
| 16 | 3IN+ | input | Non-inverting input of amplifier channel 3; recommended common-mode input range is GND to VDD − 2 V. |
| 17 | GND | power_in | Negative (lowest) power supply; in single-supply use this is the 0 V reference for all pins. |
| 18 | 4IN+ | input | Non-inverting input of amplifier channel 4; recommended common-mode input range is GND to VDD − 2 V. |
| 19 | 4IN- | input | Inverting input of amplifier channel 4; recommended common-mode input range is GND to VDD − 2 V. |
| 20 | 4OUT | output | Output of amplifier channel 4. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | Amplifiers/Comparators |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
TLC084QPWPRQ1 - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tlc084qpwprq1-etched.step/tlc084qpwprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc084qpwprq1.step/tlc084qpwprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
39e5836e7af4cafe, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).