3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM258DMR2G
onsemi · Operational Amplifier · MSOP-8
LM258DMR2G from onsemi, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output A | output | Amplifier A output, short-circuit protected (continuous duration) with output range including the negative supply. |
| 2 | Inputs A − | input | Amplifier A inverting input; common-mode range extends to VEE/Gnd and should not go more than 0.3 V below it. |
| 3 | Inputs A + | input | Amplifier A non-inverting input; common-mode range extends to VEE/Gnd and should not go more than 0.3 V below it. |
| 4 | VEE/Gnd | power_in | Negative supply or ground for single-supply or split-supply operation (split supplies up to ±16 V). |
| 5 | Inputs B + | input | Amplifier B non-inverting input; common-mode range extends to VEE/Gnd and should not go more than 0.3 V below it. |
| 6 | Inputs B − | input | Amplifier B inverting input; common-mode range extends to VEE/Gnd and should not go more than 0.3 V below it. |
| 7 | Output B | output | Amplifier B output, short-circuit protected (continuous duration) with output range including the negative supply. |
| 8 | VCC | power_in | Positive supply, 3.0 V to 32 V single supply (absolute maximum 32 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | MSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage, TA = 25°C | VIO | 2 | 5 | mV | VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO 1.4 V, RS = 0; TA = 25°C | 4 | |
| Input Offset Voltage, TA = Thigh | VIO | 7 | mV | VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO 1.4 V, RS = 0; TA = Thigh (Note 4) | 4 | ||
| Input Offset Voltage, TA = Tlow | VIO | 7 | mV | VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO 1.4 V, RS = 0; TA = Tlow (Note 4) | 4 | ||
| Input Offset Current | IIO | 3 | 30 | nA | 4 | ||
| Input Offset Current, TA = Thigh to Tlow | IIO | 100 | nA | TA = Thigh to Tlow (Note 4) | 4 | ||
| Input Bias Current | IIB | -45 | -150 | nA | 4 | ||
| Input Bias Current, TA = Thigh to Tlow | IIB | -50 | -300 | nA | TA = Thigh to Tlow (Note 4) | 4 | |
| Input Common Mode Voltage Range | VICR | 0 | 28.3 | V | VCC = 30 V (Note 5) | 4 | |
| Input Common Mode Voltage Range, TA = Thigh to Tlow | VICR | 0 | 28 | V | VCC = 30 V, TA = Thigh to Tlow (Note 5) | 4 | |
| Large Signal Open Loop Voltage Gain | AVOL | 50 | 100 | V/mV | RL = 2.0 k, VCC = 15 V, For Large VO Swing | 4 | |
| Large Signal Open Loop Voltage Gain, TA = Thigh to Tlow | AVOL | 25 | V/mV | RL = 2.0 k, VCC = 15 V, For Large VO Swing, TA = Thigh to Tlow (Note 4) | 4 | ||
| Common Mode Rejection | CMR | 70 | 85 | dB | RS ≤ 10 k | 4 | |
| Power Supply Rejection | PSR | 65 | 100 | dB | 4 | ||
| Output Voltage-High Limit | VOH | 3.3 | 3.5 | V | VCC = 5.0 V, RL = 2.0 k, TA = 25°C | 4 | |
| Output Voltage-High Limit | VOH | 26 | V | VCC = 30 V, RL = 2.0 k | 4 | ||
| Output Voltage-High Limit | VOH | 27 | 28 | V | VCC = 30 V, RL = 10 k | 4 | |
| Output Voltage-Low Limit | VOL | 5 | 20 | mV | VCC = 5.0 V, RL = 10 k | 4 | |
| Output Source Current | IO+ | 20 | 40 | mA | VID = +1.0 V, VCC = 15 V | 4 | |
| Output Sink Current | IO- | 10 | 20 | mA | VID = -1.0 V, VCC = 15 V | 4 | |
| Output Sink Current | IO- | 12 | 50 | A | VID = -1.0 V, VO = 200 mV | 4 | |
| Output Short Circuit to Ground | ISC | 40 | 60 | mA | 4 | ||
| Power Supply Current (Total Device) | ICC | 1.5 | 3 | mA | VCC = 30 V, VO = 0 V, RL = ∞ | 4 | |
| Power Supply Current (Total Device) | ICC | 0.7 | 1.2 | mA | VCC = 5 V, VO = 0 V, RL = ∞ | 4 | |
| Operating Ambient Temperature Range (LM258) | TA | -25 | 85 | °C | LM258 | 3 | |
| Power Supply Voltage, Single Supply | VCC | 32 | Vdc | Single supply | 3 | ||
| Power Supply Voltage, Split Supplies | VCC, VEE | 16 | Vdc | Split supplies (Note 1) | 3 | ||
| Input Differential Voltage Range | VIDR | 32 | Vdc | Note 1 (split power supplies) | 3 | ||
| Input Common Mode Voltage Range | VICR | -0.3 | 32 | Vdc | 3 | ||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| ESD Protection, Human Body Model | 2000 | V | All other devices, HBM | 3 | |||
| ESD Protection, Machine Model | 200 | V | All other devices, MM | 3 | |||
| Thermal Resistance, Junction-to-Air | RJA | 238 | °C/W | Case 846A (Micro8), Note 2 | 3 | ||
| Average Temperature Coefficient of Input Offset Voltage | VIO/T | 7 | V/°C | TA = Thigh to Tlow (Note 4) | 4 | ||
| Average Temperature Coefficient of Input Offset Current | IIO/T | 10 | pA/°C | TA = Thigh to Tlow (Note 4) | 4 | ||
| Channel Separation | CS | -120 | dB | 1.0 kHz ≤ f ≤ 20 kHz, Input Referenced | 4 |
CAD (KiCad official)
- Symbol:
LM258DMR2G - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm258dmr2g-etched.step/lm258dmr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm258dmr2g.step/lm258dmr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (16 pp, sha256
c8db41089b6c5181, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).