Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430F169IPM

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

MSP430F169IPM from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC power_in Digital supply voltage, positive terminal, supplying all digital parts; VCC operating range is 1.8 V to 3.6 V.
2 P6.3/A3 bidirectional General-purpose digital I/O pin, or analog input A3 of the 12-bit ADC.
3 P6.4/A4 bidirectional General-purpose digital I/O pin, or analog input A4 of the 12-bit ADC.
4 P6.5/A5 bidirectional General-purpose digital I/O pin, or analog input A5 of the 12-bit ADC.
5 P6.6/A6/DAC0 bidirectional General-purpose digital I/O pin, analog input A6 of the 12-bit ADC, or DAC12 channel 0 output.
6 P6.7/A7/DAC1/SVSIN bidirectional General-purpose digital I/O pin, analog input A7 of the 12-bit ADC, DAC12 channel 1 output, or SVS input.
7 VREF+ power_in Output of the positive terminal of the reference voltage in the ADC12; the built-in reference load current is limited to 0.5 mA at VCC = 2.2 V and 1 mA at VCC = 3 V.
8 XIN input Input port for crystal oscillator XT1; standard or watch crystals can be connected.
9 XOUT output Output terminal of crystal oscillator XT1.
10 VeREF+ input Input for an external positive reference voltage (1.4 V to AVCC for the ADC12 external reference).
11 VREF−/VeREF− power_in Negative terminal for the reference voltage, either the internal reference or an external applied reference voltage.
12 P1.0/TACLK bidirectional General-purpose digital I/O pin, or Timer_A clock signal TACLK input.
13 P1.1/TA0 bidirectional General-purpose digital I/O pin, Timer_A CCI0A capture input or Out0 compare output, also the BSL transmit pin.
14 P1.2/TA1 bidirectional General-purpose digital I/O pin, or Timer_A CCI1A capture input / Out1 compare output.
15 P1.3/TA2 bidirectional General-purpose digital I/O pin, or Timer_A CCI2A capture input / Out2 compare output.
16 P1.4/SMCLK bidirectional General-purpose digital I/O pin, or SMCLK signal output.
17 P1.5/TA0 bidirectional General-purpose digital I/O pin, or Timer_A compare Out0 output.
18 P1.6/TA1 bidirectional General-purpose digital I/O pin, or Timer_A compare Out1 output.
19 P1.7/TA2 bidirectional General-purpose digital I/O pin, or Timer_A compare Out2 output.
20 P2.0/ACLK bidirectional General-purpose digital I/O pin, or ACLK output.
21 P2.1/TAINCLK bidirectional General-purpose digital I/O pin, or Timer_A clock signal at INCLK.
22 P2.2/CAOUT/TA0 bidirectional General-purpose digital I/O pin, Timer_A CCI0B capture input, Comparator_A output, or the BSL receive pin.
23 P2.3/CA0/TA1 bidirectional General-purpose digital I/O pin, Timer_A Out1 compare output, or Comparator_A input.
24 P2.4/CA1/TA2 bidirectional General-purpose digital I/O pin, Timer_A Out2 compare output, or Comparator_A input.
25 P2.5/ROSC bidirectional General-purpose digital I/O pin, or input for the external resistor that defines the DCO nominal frequency.
26 P2.6/ADC12CLK/DMAE0 bidirectional General-purpose digital I/O pin, or ADC12 conversion clock and DMA channel 0 external trigger.
27 P2.7/TA0 bidirectional General-purpose digital I/O pin, or Timer_A compare Out0 output.
28 P3.0/STE0 bidirectional General-purpose digital I/O pin, or slave transmit enable for USART0 in SPI mode.
29 P3.1/SIMO0/SDA bidirectional General-purpose digital I/O pin, or slave in/master out of USART0 SPI mode, or I2C data for USART0 I2C mode.
30 P3.2/SOMI0 bidirectional General-purpose digital I/O pin, or slave out/master in of USART0 SPI mode.
31 P3.3/UCLK0/SCL bidirectional General-purpose digital I/O pin, or USART0 external clock input (UART/SPI) or clock output (SPI master), or I2C clock SCL.
32 P3.4/UTXD0 bidirectional General-purpose digital I/O pin, or USART0 UART transmit data out.
33 P3.5/URXD0 bidirectional General-purpose digital I/O pin, or USART0 UART receive data in.
34 P3.6/UTXD1 bidirectional General-purpose digital I/O pin, or USART1 UART transmit data out (16x/161x devices only).
35 P3.7/URXD1 bidirectional General-purpose digital I/O pin, or USART1 UART receive data in (16x/161x devices only).
36 P4.0/TB0 bidirectional General-purpose digital I/O pin, or Timer_B CCI0A/B capture input and Out0 compare output.
37 P4.1/TB1 bidirectional General-purpose digital I/O pin, or Timer_B CCI1A/B capture input and Out1 compare output.
38 P4.2/TB2 bidirectional General-purpose digital I/O pin, or Timer_B CCI2A/B capture input and Out2 compare output.
39 P4.3/TB3 bidirectional General-purpose digital I/O pin, or Timer_B CCI3A/B capture input and Out3 compare output (16x/161x devices only).
40 P4.4/TB4 bidirectional General-purpose digital I/O pin, or Timer_B CCI4A/B capture input and Out4 compare output (16x/161x devices only).
41 P4.5/TB5 bidirectional General-purpose digital I/O pin, or Timer_B CCI5A/B capture input and Out5 compare output (16x/161x devices only).
42 P4.6/TB6 bidirectional General-purpose digital I/O pin, or Timer_B CCI6A capture input and Out6 compare output (16x/161x devices only).
43 P4.7/TBCLK bidirectional General-purpose digital I/O pin, or Timer_B clock signal TBCLK input.
44 P5.0/STE1 bidirectional General-purpose digital I/O pin, or slave transmit enable for USART1 SPI mode (16x/161x devices only).
45 P5.1/SIMO1 bidirectional General-purpose digital I/O pin, or slave in/master out of USART1 SPI mode (16x/161x devices only).
46 P5.2/SOMI1 bidirectional General-purpose digital I/O pin, or slave out/master in of USART1 SPI mode (16x/161x devices only).
47 P5.3/UCLK1 bidirectional General-purpose digital I/O pin, or USART1 external clock input (UART/SPI) or SPI clock output (16x/161x devices only).
48 P5.4/MCLK bidirectional General-purpose digital I/O pin, or main system clock MCLK output.
49 P5.5/SMCLK bidirectional General-purpose digital I/O pin, or submain system clock SMCLK output.
50 P5.6/ACLK bidirectional General-purpose digital I/O pin, or auxiliary clock ACLK output.
51 P5.7/TBOUTH/SVSOUT bidirectional General-purpose digital I/O pin, or switch for all Timer_B PWM outputs to high impedance, or SVS comparator output.
52 XT2OUT output Output terminal of crystal oscillator XT2; only standard crystals can be connected to XT2.
53 XT2IN input Input port for crystal oscillator XT2; only standard crystals can be connected.
54 TDO/TDI bidirectional Test data output port, or programming data input terminal during device programming and the JTAG fuse-blow sequence.
55 TDI/TCLK input Test data input or test clock input; the device protection fuse is connected to this pin and the fuse-blow voltage VFB is applied here.
56 TMS input Test mode select, used as an input port for device programming and test; it has an internal pull-up.
57 TCK input Test clock, the clock input port for device programming, test and bootstrap loader start; it has an internal pull-up.
58 RST/NMI input Reset input, nonmaskable interrupt input port, or bootstrap loader start in Flash devices.
59 P6.0/A0 bidirectional General-purpose digital I/O pin, or analog input A0 of the 12-bit ADC.
60 P6.1/A1 bidirectional General-purpose digital I/O pin, or analog input A1 of the 12-bit ADC.
61 P6.2/A2 bidirectional General-purpose digital I/O pin, or analog input A2 of the 12-bit ADC.
62 AVSS power_in Analog supply voltage, negative terminal; supplies only the analog portion of the ADC12 and DAC12.
63 DVSS power_in Digital supply voltage, negative terminal; supplies all digital parts.
64 AVCC power_in Analog supply voltage, positive terminal; supplies only the analog portion of the ADC12 and DAC12, and must equal DVCC (AVCC = DVCC = VCC) in the recommended operating conditions.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage during program execution VCC 1.8 3.6 V AVCC = DVCC = VCC 25
Supply voltage during flash memory programming VCC 2.7 3.6 V AVCC = DVCC = VCC 25
Supply voltage during program execution, SVS enabled VCC 2 3.6 V SVS enabled (see Note 1); AVCC = DVCC = VCC 25
Operating free-air temperature range TA -40 85 °C MSP430F15x/16x/161x 25
LFXT1 crystal frequency, ceramic resonator (XT1 mode) f(LFXT1) 450 8000 kHz XT1 selected, XTS=1 (see Notes 2 and 3) 25
LFXT1 crystal frequency, crystal (XT1 mode) f(LFXT1) 1000 8000 kHz XT1 selected, XTS=1 25
XT2 crystal frequency, ceramic resonator f(XT2) 450 8000 kHz 25
XT2 crystal frequency, crystal f(XT2) 1000 8000 kHz 25
Processor frequency (signal MCLK) f(System) 4.15 MHz VCC = 1.8 V; minimum printed as DC 25
Processor frequency (signal MCLK) f(System) 8 MHz VCC = 3.6 V; minimum printed as DC 25
Voltage applied at VCC to VSS VCC -0.3 4.1 V All voltages referenced to VSS 25
Voltage applied to any pin -0.3 V Printed max is VCC + 0.3 V; referenced to VSS 25
Diode current at any device terminal -2 2 mA 25
Storage temperature, Tstg, unprogrammed device Tstg -55 150 °C Unprogrammed device 25
Storage temperature, Tstg, programmed device Tstg -55 85 °C Programmed device 25
Active mode supply current I(AM) 330 400 μA f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, XTS=0, SELM=(0,1), TA=−40°C to 85°C, VCC=2.2 V 26
Active mode supply current I(AM) 500 600 μA f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, XTS=0, SELM=(0,1), TA=−40°C to 85°C, VCC=3 V 26
Active mode supply current I(AM) 2.5 7 μA f(MCLK)=f(SMCLK)=4,096 Hz, f(ACLK)=4,096 Hz, XTS=0, SELM=3, TA=−40°C to 85°C, VCC=2.2 V 26
Active mode supply current I(AM) 9 20 μA f(MCLK)=f(SMCLK)=4,096 Hz, f(ACLK)=4,096 Hz, XTS=0, SELM=3, TA=−40°C to 85°C, VCC=3 V 26
Low-power mode supply current (LPM0) I(LPM0) 50 60 μA f(MCLK)=0 MHz, f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, XTS=0, SELM=(0,1), TA=−40°C to 85°C, VCC=2.2 V 26
Low-power mode supply current (LPM0) I(LPM0) 75 90 μA f(MCLK)=0 MHz, f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, XTS=0, SELM=(0,1), TA=−40°C to 85°C, VCC=3 V 26
Low-power mode supply current (LPM2) I(LPM2) 11 14 μA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32.768 Hz, SCG0=0, TA=−40°C to 85°C, VCC=2.2 V 26
Low-power mode supply current (LPM2) I(LPM2) 17 22 μA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32.768 Hz, SCG0=0, TA=−40°C to 85°C, VCC=3 V 26
Low-power mode supply current (LPM3) I(LPM3) 1.1 1.6 μA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0=1, TA=−40°C, VCC=2.2 V 26
Low-power mode supply current (LPM3) I(LPM3) 2.2 3 μA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0=1, TA=85°C, VCC=2.2 V 26
Low-power mode supply current (LPM3) I(LPM3) 2.2 2.8 μA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0=1, TA=−40°C, VCC=3 V 26
Low-power mode supply current (LPM3) I(LPM3) 2 2.6 μA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0=1, TA=25°C, VCC=3 V 26
Low-power mode supply current (LPM3) I(LPM3) 3 4.3 μA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0=1, TA=85°C, VCC=3 V 26
Low-power mode supply current (LPM4) I(LPM4) 0.1 0.5 μA f(MCLK)=f(SMCLK)=f(ACLK)=0 MHz/0 Hz, SCG0=1, TA=−40°C 26
Low-power mode supply current (LPM4) I(LPM4) 0.2 0.5 μA f(MCLK)=f(SMCLK)=f(ACLK)=0 MHz/0 Hz, SCG0=1, TA=25°C, VCC=2.2 V/3 V 26
Low-power mode supply current (LPM4) I(LPM4) 1.3 2.5 μA f(MCLK)=f(SMCLK)=f(ACLK)=0 MHz/0 Hz, SCG0=1, TA=85°C, VCC=2.2 V/3 V 26
Positive-going input threshold voltage VIT+ 1.1 1.5 V Schmitt-trigger inputs, VCC=2.2 V 28
Positive-going input threshold voltage VIT+ 1.5 1.98 V Schmitt-trigger inputs, VCC=3 V 28
Negative-going input threshold voltage VIT− 0.4 0.9 V Schmitt-trigger inputs, VCC=2.2 V 28
Negative-going input threshold voltage VIT− 0.9 1.3 V Schmitt-trigger inputs, VCC=3 V 28
Input voltage hysteresis (VIT+ − VIT−) Vhys 0.3 1.1 V Schmitt-trigger inputs, VCC=2.2 V 28
Input voltage hysteresis (VIT+ − VIT−) Vhys 0.5 1 V Schmitt-trigger inputs, VCC=3 V 28
Leakage current, port Px Ilkg(Px.y) -50 50 nA Port Px, V(Px.y) (see Note 2), VCC=2.2 V/3 V 28
Duty cycle of output frequency, P1.0/TACLK t(Xdc) 40 60 % P1.0/TACLK, f(ACLK)=f(LFXT1)=f(XT1), CL=20 pF, VCC=2.2 V/3 V 29
Duty cycle of output frequency, P1.0/TACLK (LF) t(Xdc) 30 70 % P1.0/TACLK, f(ACLK)=f(LFXT1)=f, LF mode, CL=20 pF, VCC=2.2 V/3 V 29
Duty cycle of output frequency, P1.1/TA0/MCLK t(Xdc) 40 60 % P1.1/TA0/MCLK, f(MCLK)=f(XT1), CL=20 pF, VCC=2.2 V/3 V 29
Duty cycle of output frequency, P1.4/TBCLK/SMCLK t(Xdc) 40 60 % P1.4/TBCLK/SMCLK, f(SMCLK)=f(XT2), CL=20 pF, VCC=2.2 V/3 V 29
Comparator_A supply current, CAON=1, CARSEL=0, CAREF=0 I(DD) 25 40 μA CAON=1, CARSEL=0, CAREF=0, VCC=2.2 V 31
Comparator_A supply current, CAON=1, CARSEL=0, CAREF=0 I(DD) 45 60 μA CAON=1, CARSEL=0, CAREF=0, VCC=3 V 31
Comparator_A reference ladder/diode supply current I(Refladder/Refdiode) 30 50 μA CAON=1, CARSEL=0, CAREF=1/2/3, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, VCC=2.2 V 31
Comparator_A reference ladder/diode supply current I(Refladder/Refdiode) 45 71 μA CAON=1, CARSEL=0, CAREF=1/2/3, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, VCC=3 V 31
Common-mode input voltage V(IC) 0 V CAON=1, VCC=2.2 V/3 V; printed max is VCC−1 V 31
Voltage @ 0.25 VCC node V(Ref025) 0.23 0.24 0.25 V PCA0=1, CARSEL=1, CAREF=1, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, VCC=2.2 V/3 V 31
Voltage @ 0.5 VCC node V(Ref050) 0.47 0.48 0.5 V PCA0=1, CARSEL=1, CAREF=2, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, VCC=2.2 V/3 V 31
Reference voltage VRefVT V(RefVT) 390 480 540 mV PCA0=1, CARSEL=1, CAREF=3, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, VCC=2.2 V 31
Reference voltage VRefVT V(RefVT) 400 490 550 mV PCA0=1, CARSEL=1, CAREF=3, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, VCC=3 V 31
Offset voltage V(offset) -30 30 mV See Note 2; VCC=2.2 V/3 V 31
Input hysteresis Vhys 0 0.7 1.4 mV CAON=1, VCC=2.2 V/3 V 31
DCO frequency, Rsel=7, DCO=7 (fDCO77) f(DCO77) 4 4.5 4.9 MHz Rsel=7, DCO=7, MOD=0, DCOR=0, TA=25°C, VCC=2.2 V 37
DCO frequency, Rsel=7, DCO=7 (fDCO77) f(DCO77) 4.4 4.9 5.4 MHz Rsel=7, DCO=7, MOD=0, DCOR=0, TA=25°C, VCC=3 V 37
Drift with VCC variation DV 0 5 10 %/V Rsel=4, DCO=3, MOD=0 (see Note 2), VCC=2.2 V/3 V; not production tested 37
Analog supply voltage AVCC 2.2 3.6 V AVCC and DVCC connected together; AVSS and DVSS connected together 39
Analog supply voltage AVCC 2.2 3.6 V DAC12 supply: AVCC = DVCC, AVSS = DVSS = 0 V 43

CAD (KiCad official)

  • Symbol: MSP430F169IPM
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: msp430f169ipm-etched.step / msp430f169ipm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430f169ipm.step / msp430f169ipm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (85 pp, sha256 697b9cb106833560, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF