Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LP2951-02YM

Microchip Tech · Power Management Specialized - PMIC · SOIC-8

LP2951-02YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Regulated voltage output; requires at least 1.0 μF capacitor to ground for stability, and is tied to SENSE (pin 2) for a 5V pin-strapped output.
2 SENSE input Output voltage sense input, tied to VOUT (pin 1) for 5V pin-strapped operation.
3 SHDN input Logic-compatible shutdown input that switches the regulator on and off.
4 GND power_in Ground terminal.
5 ERROR output Open-collector error flag output that goes low when the output falls more than about 5% out of regulation, rated to sink 400 μA and needing an external pull-up resistor (100 kΩ to 1 MΩ suggested).
6 5V TAP passive Internal resistor divider tap for 5V output, tied to FB (pin 7) for a 5V output.
7 FB input Voltage feedback input with nominal 20 nA bias current, tied to 5V TAP for 5V output or to an external resistor divider for 1.235V to 30V output.
8 VIN power_in Unregulated supply voltage input; a 0.1 μF capacitor to ground is advised if more than 10 inches of wire lies between it and the filter capacitor or if a battery is used.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 4.975 5 5.025 V TJ = 25°C, LP2951-02 (±0.5%) 5
Output Voltage VOUT 4.95 5.05 V -25°C ≤ TJ ≤ +85°C, LP2951-02 (±0.5%) 6
Output Voltage Over Full Temperature Range VOUT 4.94 5.06 V -40°C to +125°C, LP2951-02 (±0.5%) 6
Output Voltage Over Load Variation VOUT 4.93 5.07 V LP2951-02 (±0.5%), 100 μA ≤ IL ≤ 100 mA, TJ ≤ TJ(max) 6
Output Voltage Temperature Coefficient 20 100 ppm/°C LP2951-02 (±0.5%), Note 1 6
Line Regulation 0.03 0.1 % LP2951-02 (±0.5%), Note 2, 3 7
Line Regulation (over temperature) 0.2 % LP2951-02 (±0.5%), Note 2, 3 7
Load Regulation 0.04 0.1 % LP2951-02 (±0.5%), Note 2, 100 μA ≤ IL ≤ 100 mA 7
Load Regulation (over temperature) 0.2 % LP2951-02 (±0.5%), Note 2, 100 μA ≤ IL ≤ 100 mA 7
Dropout Voltage 50 80 mV Note 4, IL = 100 μA 7
Dropout Voltage (over temperature) 150 mV Note 4, IL = 100 μA 7
Dropout Voltage 380 450 mV Note 4, IL = 100 mA 7
Dropout Voltage (over temperature) 600 mV Note 4, IL = 100 mA 7
Ground Current 100 150 μA IL = 100 μA 7
Ground Current (over temperature) 200 μA IL = 100 μA 7
Ground Current 8 12 mA IL = 100 mA 7
Ground Current (over temperature) 14 mA IL = 100 mA 7
Dropout Current 180 250 μA VIN = 4.5V, IL = 100 μA 8
Dropout Current (over temperature) 310 μA VIN = 4.5V, IL = 100 μA 8
Current Limit 160 220 mA VOUT = 0V 8
Thermal Regulation 0.05 0.2 %/W Note 5 8
Reference Voltage 1.22 1.235 1.25 V LP2951-02 (±0.5%) 8
Reference Voltage (over temperature) 1.2 1.26 V LP2951-02 (±0.5%) 8
Reference Voltage 1.19 1.27 V LP2951-02 (±0.5%), Note 7 8
Output Noise 430 μVRMS 10 Hz to 100 kHz, CL = 1 μF 8
Output Noise 160 μVRMS 10 Hz to 100 kHz, CL = 200 μF 8
Output Noise 100 μVRMS 10 Hz to 100 kHz, CL = 3.3 μF, 0.01 μF bypass Feedback to Output 8
Feedback Bias Current 20 40 nA 9
Feedback Bias Current (over temperature) 60 nA 9
Reference Voltage Temperature Coefficient 20 ppm/°C LP2951-02 (±0.5%), Note 8 9
Feedback Bias Current Temperature Coefficient 0.1 nA/°C 9
Output Leakage Current 0.01 1 μA VOH = 30V 9
Output Leakage Current (over temperature) 2 μA VOH = 30V 9
Output Low Voltage (Flag) 150 250 mV VIN = 4.5V, IOL = 200μA 9
Output Low Voltage (Flag) (over temperature) 400 mV VIN = 4.5V, IOL = 200μA 9
Upper Threshold Voltage 40 60 mV Note 6 9
Upper Threshold Voltage (over temperature) 25 mV Note 6 9
Lower Threshold Voltage 75 95 mV Note 6 9
Lower Threshold Voltage (over temperature) 140 mV Note 6 9
Hysteresis 15 mV Note 6 9
Input Logic Voltage (Low) 0.7 V LP2951-02 (±0.5%), Low 10
Input Logic Voltage (High) 2 V LP2951-02 (±0.5%), High 10
Input Logic Voltage (threshold) 1.3 V LP2951-02 (±0.5%) 10
Shutdown Input Current 30 50 μA VSHUTDOWN = 2.4V 11
Shutdown Input Current (over temperature) 100 μA VSHUTDOWN = 2.4V 11
Shutdown Input Current 450 600 μA VSHUTDOWN = 30V 11
Shutdown Input Current (over temperature) 700 μA VSHUTDOWN = 30V 11
Regulator Output Current in Shutdown 3 10 μA Note 9 11
Regulator Output Current in Shutdown (over temperature) 20 μA Note 9 11
Input Supply Voltage -0.3 30 V 5
Feedback Input Voltage -1.5 30 V Note 2, 3 5
Shutdown Input Voltage -0.3 30 V Note 2 5
Error Comparator Output Voltage -0.3 30 V Note 2 5
Storage Temperature -65 150 °C 5
Operating Junction Temperature Range TJ -40 125 °C 12
Thermal Resistance, SOIC, Junction-to-Ambient θJA 160 °C/W Typically mounting on a 1'' square copper-clad FR4 circuit board 12
Thermal Resistance, SOIC, Junction-to-Case θJC 25 °C/W 12

CAD (KiCad official)

  • Symbol: LP2951-02YM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lp2951-02ym-etched.step / lp2951-02ym-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2951-02ym.step / lp2951-02ym.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (30 pp, sha256 9310d226e59ae920, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF