Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2904QPWRG4Q1

Texas Instruments · Operational Amplifier · TSSOP-8

LM2904QPWRG4Q1 from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of first operational amplifier.
2 IN1- input Inverting input of first operational amplifier.
3 IN1+ input Non-inverting input of first operational amplifier, common-mode voltage range V- to (V+)-2V.
4 V- power_in Negative power supply rail or ground reference in single-supply configuration.
5 IN2+ input Non-inverting input of second operational amplifier, common-mode voltage range V- to (V+)-2V.
6 IN2- input Inverting input of second operational amplifier.
7 OUT2 output Output of second operational amplifier.
8 V+ power_in Positive power supply rail, operating range 3V to 26V above V-.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -7 3 7 mV VS=5V to max; VCM=0V; VO=1.4V; TA=25°C 10
Input offset voltage over temperature VOS -10 10 mV TA=-40°C to 125°C 10
Input bias current IB -20 -250 nA VO=(V-)+1.4V 10
Input bias current over temperature IB -500 nA TA=-40°C to 125°C 10
Input offset current IOS 2 50 nA VO=(V-)+1.4V; LM2904-Q1; TA=25°C 10
Input offset current over temperature IOS 300 nA VO=(V-)+1.4V; TA=-40°C to 125°C 10
Open-loop voltage gain AOL 25 100 V/mV VS=15V; VO=(V-)+1V to (V-)+11V; RL≥2kΩ to (V-); TA=25°C 10
Open-loop voltage gain over temperature AOL 15 V/mV VS=15V; VO=(V-)+1V to (V-)+11V; RL≥2kΩ to (V-); TA=-40°C to 125°C 10
Common-mode rejection ratio CMRR 65 80 dB VS=5V to max; VCM=0V 10
Power supply rejection ratio PSRR 65 100 dB VS=5V to 30V 10
Output swing from negative rail VO 5 20 mV VS=5V; RL≤10kΩ to (V-); TA=-40°C to 125°C 10
Output source current IO -20 -30 mA VS=15V; VO=V-; VID=1V; source 10
Output source current over temperature IO -10 mA VS=15V; VO=V-; VID=1V; source; TA=-40°C to 125°C 10
Output sink current IO 10 20 mA VS=15V; VO=V+; VID=-1V; sink 10
Output sink current over temperature IO 5 mA VS=15V; VO=V+; VID=-1V; sink; TA=-40°C to 125°C 10
Output sink current at low output IO 30 µA VID=-1V; VO=(V-)+200mV; LM2904-Q1 10
Short-circuit current ISC -60 40 60 mA VS=10V; VO=VS/2 11
Quiescent current per amplifier IQ 350 600 µA VO=VS/2; IO=0A; TA=-40°C to 125°C 11
Quiescent current per amplifier at max supply IQ 500 1000 µA VS=max; VO=max/2; IO=0A 11
Input offset voltage drift dVOS/dT -7 7 7 µV/°C TA=-40°C to 125°C 10
Input offset current drift dIOS/dT 10 pA/°C TA=-40°C to 125°C 10
Channel separation VO1/VO2 120 dB f=1kHz to 20kHz 10
Input voltage noise density en 40 nV/√Hz f=1kHz 10
Gain-bandwidth product GBW 0.7 MHz 10
Slew rate SR 0.3 V/µs G=+1 10
Supply voltage VS 3 26 V VS=(V+)-(V-), LM2904-Q1 7
Operating ambient temperature TA -40 125 °C 7
Junction-to-ambient thermal resistance RθJA 171.7 °C/W PW (TSSOP-8) package 7
Junction-to-case (top) thermal resistance RθJC(top) 68.8 °C/W PW (TSSOP-8) package 7
Junction-to-board thermal resistance RθJB 99.2 °C/W PW (TSSOP-8) package 7
Junction-to-top characterization parameter ψJT 11.5 °C/W PW (TSSOP-8) package 7
Junction-to-board characterization parameter ψJB 97.9 °C/W PW (TSSOP-8) package 7

CAD (KiCad official)

  • Symbol: LM2904QPWRG4Q1
  • Footprint: Package_SO:TSSOP-8_3x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm2904qpwrg4q1-etched.step / lm2904qpwrg4q1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2904qpwrg4q1.step / lm2904qpwrg4q1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 58d8285f590f5a5e, retrieved 2026-10-03, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF