component
STM32F207VCT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32F207VCT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F207VCT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5V-tolerant GPIO PE2 with alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3 and EVENTOUT. |
| 2 | PE3 | bidirectional | 5V-tolerant GPIO PE3 with alternate functions TRACED0, FSMC_A19 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5V-tolerant GPIO PE4 with alternate functions TRACED1, FSMC_A20, DCMI_D4 and EVENTOUT. |
| 4 | PE5 | bidirectional | 5V-tolerant GPIO PE5 with alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6 and EVENTOUT. |
| 5 | PE6 | bidirectional | 5V-tolerant GPIO PE6 with alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7 and EVENTOUT. |
| 6 | VBAT | power_in | Battery backup supply input for RTC, 20x32-bit backup registers and optional backup SRAM when VDD is not present. |
| 7 | PC13 | bidirectional | 5V-tolerant GPIO PC13, supplied through the power switch (limited to 3 mA sink) with alternate function RTC_AF1 and EVENTOUT; output speed must not exceed 2 MHz with max 30 pF load. |
| 8 | PC14-OSC32_IN | bidirectional | 5V-tolerant GPIO PC14, supplied through the power switch, also usable as 32.768 kHz LSE oscillator input (OSC32_IN) with EVENTOUT alternate function. |
| 9 | PC15-OSC32_OUT | bidirectional | 5V-tolerant GPIO PC15, supplied through the power switch, also usable as 32.768 kHz LSE oscillator output (OSC32_OUT) with EVENTOUT alternate function. |
| 10 | VSS | power_in | Digital ground supply pin. |
| 11 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |
| 12 | PH0-OSC_IN | bidirectional | 5V-tolerant GPIO PH0, also usable as 4-26 MHz HSE crystal oscillator input (OSC_IN) with EVENTOUT alternate function. |
| 13 | PH1-OSC_OUT | bidirectional | 5V-tolerant GPIO PH1, also usable as 4-26 MHz HSE crystal oscillator output (OSC_OUT) with EVENTOUT alternate function. |
| 14 | NRST | bidirectional | Bidirectional external reset pin with embedded weak pull-up resistor; active low, used to reset the device. |
| 15 | PC0 | bidirectional | 5V-tolerant GPIO PC0 with alternate function OTG_HS_ULPI_STP, EVENTOUT and additional analog function ADC123_IN10. |
| 16 | PC1 | bidirectional | 5V-tolerant GPIO PC1 with alternate function ETH_MDC, EVENTOUT and additional analog function ADC123_IN11. |
| 17 | PC2 | bidirectional | 5V-tolerant GPIO PC2 with alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, EVENTOUT and additional analog function ADC123_IN12. |
| 18 | PC3 | bidirectional | 5V-tolerant GPIO PC3 with alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, EVENTOUT and additional analog function ADC123_IN13. |
| 19 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |
| 20 | VSSA | power_in | Analog ground supply pin for ADC, DAC, reset block and RC oscillator. |
| 21 | VREF+ | power_in | Positive reference voltage supply pin for the ADC/DAC. |
| 22 | VDDA | power_in | Analog supply pin for ADC, DAC, reset block, RC oscillator and PLL. |
| 23 | PA0-WKUP | bidirectional | 5V-tolerant GPIO PA0 with alternate functions USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, EVENTOUT and additional functions ADC123_IN0 and WKUP (wakeup from standby). |
| 24 | PA1 | bidirectional | 5V-tolerant GPIO PA1 with alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2, EVENTOUT and additional analog function ADC123_IN1. |
| 25 | PA2 | bidirectional | 5V-tolerant GPIO PA2 with alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO, EVENTOUT and additional analog function ADC123_IN2. |
| 26 | PA3 | bidirectional | 5V-tolerant GPIO PA3 with alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL, EVENTOUT and additional analog function ADC123_IN3. |
| 27 | VSS | power_in | Digital ground supply pin. |
| 28 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |
| 29 | PA4 | bidirectional | 3.3V-tolerant (TTa) GPIO PA4 with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS, EVENTOUT and additional functions ADC12_IN4 and DAC_OUT1. |
| 30 | PA5 | bidirectional | 3.3V-tolerant (TTa) GPIO PA5 with alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N, EVENTOUT and additional functions ADC12_IN5 and DAC_OUT2. |
| 31 | PA6 | bidirectional | 5V-tolerant GPIO PA6 with alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN, EVENTOUT and additional analog function ADC12_IN6. |
| 32 | PA7 | bidirectional | 5V-tolerant GPIO PA7 with alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV, EVENTOUT and additional analog function ADC12_IN7. |
| 33 | PC4 | bidirectional | 5V-tolerant GPIO PC4 with alternate functions ETH_RMII_RXD0, ETH_MII_RXD0, EVENTOUT and additional analog function ADC12_IN14. |
| 34 | PC5 | bidirectional | 5V-tolerant GPIO PC5 with alternate functions ETH_RMII_RXD1, ETH_MII_RXD1, EVENTOUT and additional analog function ADC12_IN15. |
| 35 | PB0 | bidirectional | 5V-tolerant GPIO PB0 with alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N, EVENTOUT and additional analog function ADC12_IN8. |
| 36 | PB1 | bidirectional | 5V-tolerant GPIO PB1 with alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N, EVENTOUT and additional analog function ADC12_IN9. |
| 37 | PB2-BOOT1 | bidirectional | 5V-tolerant GPIO PB2, dual-function boot pin (BOOT1) with EVENTOUT alternate function. |
| 38 | PE7 | bidirectional | 5V-tolerant GPIO PE7 with alternate functions FSMC_D4, TIM1_ETR, EVENTOUT. |
| 39 | PE8 | bidirectional | 5V-tolerant GPIO PE8 with alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT. |
| 40 | PE9 | bidirectional | 5V-tolerant GPIO PE9 with alternate functions FSMC_D6, TIM1_CH1, EVENTOUT. |
| 41 | PE10 | bidirectional | 5V-tolerant GPIO PE10 with alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT. |
| 42 | PE11 | bidirectional | 5V-tolerant GPIO PE11 with alternate functions FSMC_D8, TIM1_CH2, EVENTOUT. |
| 43 | PE12 | bidirectional | 5V-tolerant GPIO PE12 with alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT. |
| 44 | PE13 | bidirectional | 5V-tolerant GPIO PE13 with alternate functions FSMC_D10, TIM1_CH3, EVENTOUT. |
| 45 | PE14 | bidirectional | 5V-tolerant GPIO PE14 with alternate functions FSMC_D11, TIM1_CH4, EVENTOUT. |
| 46 | PE15 | bidirectional | 5V-tolerant GPIO PE15 with alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT. |
| 47 | PB10 | bidirectional | 5V-tolerant GPIO PB10 with alternate functions SPI2_SCK, I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, EVENTOUT. |
| 48 | PB11 | bidirectional | 5V-tolerant GPIO PB11 with alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN, ETH_MII_TX_EN, TIM2_CH4, EVENTOUT. |
| 49 | VCAP_1 | power_in | Voltage regulator internal decoupling supply pin, requires an external capacitor per Section 6.3.2 (VCAP1/VCAP2 external capacitor) specifications. |
| 50 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |
| 51 | PB12 | bidirectional | 5V-tolerant GPIO PB12 with alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT. |
| 52 | PB13 | bidirectional | 5V-tolerant GPIO PB13 with alternate functions SPI2_SCK, I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1, EVENTOUT and additional function OTG_HS_VBUS. |
| 53 | PB14 | bidirectional | 5V-tolerant GPIO PB14 with alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, EVENTOUT. |
| 54 | PB15 | bidirectional | 5V-tolerant GPIO PB15 with alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, RTC_50Hz, EVENTOUT. |
| 55 | PD8 | bidirectional | 5V-tolerant GPIO PD8 with alternate functions FSMC_D13, USART3_TX, EVENTOUT. |
| 56 | PD9 | bidirectional | 5V-tolerant GPIO PD9 with alternate functions FSMC_D14, USART3_RX, EVENTOUT. |
| 57 | PD10 | bidirectional | 5V-tolerant GPIO PD10 with alternate functions FSMC_D15, USART3_CK, EVENTOUT. |
| 58 | PD11 | bidirectional | 5V-tolerant GPIO PD11 with alternate functions FSMC_A16, USART3_CTS, EVENTOUT. |
| 59 | PD12 | bidirectional | 5V-tolerant GPIO PD12 with alternate functions FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT. |
| 60 | PD13 | bidirectional | 5V-tolerant GPIO PD13 with alternate functions FSMC_A18, TIM4_CH2, EVENTOUT. |
| 61 | PD14 | bidirectional | 5V-tolerant GPIO PD14 with alternate functions FSMC_D0, TIM4_CH3, EVENTOUT. |
| 62 | PD15 | bidirectional | 5V-tolerant GPIO PD15 with alternate functions FSMC_D1, TIM4_CH4, EVENTOUT. |
| 63 | PC6 | bidirectional | 5V-tolerant GPIO PC6 with alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, EVENTOUT. |
| 64 | PC7 | bidirectional | 5V-tolerant GPIO PC7 with alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, EVENTOUT. |
| 65 | PC8 | bidirectional | 5V-tolerant GPIO PC8 with alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, EVENTOUT. |
| 66 | PC9 | bidirectional | 5V-tolerant GPIO PC9 with alternate functions I2S2_CKIN, I2S3_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, EVENTOUT. |
| 67 | PA8 | bidirectional | 5V-tolerant GPIO PA8 with alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, EVENTOUT. |
| 68 | PA9 | bidirectional | 5V-tolerant GPIO PA9 with alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0, EVENTOUT and additional function OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5V-tolerant GPIO PA10 with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, EVENTOUT. |
| 70 | PA11 | bidirectional | 5V-tolerant GPIO PA11 with alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, EVENTOUT. |
| 71 | PA12 | bidirectional | 5V-tolerant GPIO PA12 with alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, EVENTOUT. |
| 72 | PA13 | bidirectional | 5V-tolerant GPIO PA13, default function after reset is JTMS-SWDIO (SWJ-DP debug), also EVENTOUT alternate function. |
| 73 | VCAP_2 | power_in | Voltage regulator internal decoupling supply pin, requires an external capacitor per Section 6.3.2 (VCAP1/VCAP2 external capacitor) specifications. |
| 74 | VSS | power_in | Digital ground supply pin. |
| 75 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |
| 76 | PA14 | bidirectional | 5V-tolerant GPIO PA14, default function after reset is JTCK-SWCLK (SWJ-DP debug clock), also EVENTOUT alternate function. |
| 77 | PA15 | bidirectional | 5V-tolerant GPIO PA15, default function after reset is JTDI, also alternate functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, EVENTOUT. |
| 78 | PC10 | bidirectional | 5V-tolerant GPIO PC10 with alternate functions SPI3_SCK, I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, EVENTOUT. |
| 79 | PC11 | bidirectional | 5V-tolerant GPIO PC11 with alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, EVENTOUT. |
| 80 | PC12 | bidirectional | 5V-tolerant GPIO PC12 with alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, EVENTOUT. |
| 81 | PD0 | bidirectional | 5V-tolerant GPIO PD0 with alternate functions FSMC_D2, CAN1_RX, EVENTOUT. |
| 82 | PD1 | bidirectional | 5V-tolerant GPIO PD1 with alternate functions FSMC_D3, CAN1_TX, EVENTOUT. |
| 83 | PD2 | bidirectional | 5V-tolerant GPIO PD2 with alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT. |
| 84 | PD3 | bidirectional | 5V-tolerant GPIO PD3 with alternate functions FSMC_CLK, USART2_CTS, EVENTOUT. |
| 85 | PD4 | bidirectional | 5V-tolerant GPIO PD4 with alternate functions FSMC_NOE, USART2_RTS, EVENTOUT. |
| 86 | PD5 | bidirectional | 5V-tolerant GPIO PD5 with alternate functions FSMC_NWE, USART2_TX, EVENTOUT. |
| 87 | PD6 | bidirectional | 5V-tolerant GPIO PD6 with alternate functions FSMC_NWAIT, USART2_RX, EVENTOUT. |
| 88 | PD7 | bidirectional | 5V-tolerant GPIO PD7 with alternate functions USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT. |
| 89 | PB3 | bidirectional | 5V-tolerant GPIO PB3, default function after reset is JTDO/TRACESWO, also alternate functions SPI3_SCK, I2S3_SCK, TIM2_CH2, SPI1_SCK, EVENTOUT. |
| 90 | PB4 | bidirectional | 5V-tolerant GPIO PB4, default function after reset is NJTRST, also alternate functions SPI3_MISO, TIM3_CH1, SPI1_MISO, EVENTOUT. |
| 91 | PB5 | bidirectional | 5V-tolerant GPIO PB5 with alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, EVENTOUT. |
| 92 | PB6 | bidirectional | 5V-tolerant GPIO PB6 with alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, EVENTOUT. |
| 93 | PB7 | bidirectional | 5V-tolerant GPIO PB7 with alternate functions I2C1_SDA, FSMC_NL (FSMC_NADV), DCMI_VSYNC, USART1_RX, TIM4_CH2, EVENTOUT. |
| 94 | BOOT0 | input | Dedicated boot mode selection input pin (also usable as VPP Flash programming voltage) that, together with BOOT1, selects the boot memory at reset. |
| 95 | PB8 | bidirectional | 5V-tolerant GPIO PB8 with alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, EVENTOUT. |
| 96 | PB9 | bidirectional | 5V-tolerant GPIO PB9 with alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, EVENTOUT. |
| 97 | PE0 | bidirectional | 5V-tolerant GPIO PE0 with alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT. |
| 98 | PE1 | bidirectional | 5V-tolerant GPIO PE1 with alternate functions FSMC_NBL1, DCMI_D3, EVENTOUT. |
| 99 | RFU | unconnected | Reserved for future use pin; may be tied to VDD, tied to VSS, or left unconnected per datasheet note. |
| 100 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
STM32F207VCT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f207vct6-etched.step/stm32f207vct6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f207vct6.step/stm32f207vct6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (179 pp, sha256
6ffebd41462b5c10, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).