component
COS2170SRB
Public Made by Adomby adom
COSINE Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCOS2170SRB
COSINE · Operational Amplifier · SOP-8
COS2170SRB from COSINE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Channel 1 output; the output voltage range extends to within millivolts of each supply rail. |
| 2 | -IN1 | input | Channel 1 inverting input; voltage range can go from -Vs -0.3V to +Vs +0.3V. |
| 3 | +IN1 | input | Channel 1 non-inverting input; same voltage range as -IN (-Vs -0.3V to +Vs +0.3V). |
| 4 | -Vs | power_in | Negative power supply or ground; if not connected to ground, bypass with a 0.1μF capacitor placed close to the part. |
| 5 | +IN2 | input | Channel 2 non-inverting input; same voltage range as -IN (-Vs -0.3V to +Vs +0.3V). |
| 6 | -IN2 | input | Channel 2 inverting input; voltage range can go from -Vs -0.3V to +Vs +0.3V. |
| 7 | OUT2 | output | Channel 2 output; the output voltage range extends to within millivolts of each supply rail. |
| 8 | +Vs | power_in | Positive power supply (3.0V to 40V); place a 0.1μF bypass capacitor as close to the part as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (grade B) | VOS | -5 | 1 | 5 | mV | 4 | |
| Input Offset Voltage Drift | ΔVOS/ΔT | -3 | 0.3 | 3 | μV/°C | -40 to 125°C | 4 |
| Common-Mode Voltage Range (min relative to V-S, max relative to V+S) | VCM | -0.1 | -2 | V | VS = 40V | 4 | |
| Common-Mode Rejection Ratio | CMRR | 60 | 120 | dB | V-S -0.1 < VCM < V+S -2 | 4 | |
| Open-Loop Voltage Gain | AOL | 70 | 130 | dB | VO=0.2V to 4.8V | 4 | |
| Output Voltage Swing from Rail | 500 | mV | RL=10kΩ, VS = 40V | 4 | |||
| Operating Voltage Range | VS | 3 | 40 | V | 4 | ||
| Power Supply Rejection Ratio | PSRR | 75 | 100 | dB | VS = +3.0V to +40V | 4 | |
| Short-Circuit Current, sourcing | ISR | 40 | mA | Sourcing | 4 | ||
| Short-Circuit Current, sinking | ISK | -48 | mA | Sinking | 4 | ||
| Input Bias Current | IB | 10 | pA | 4 | |||
| Input Bias Current | IB | 20 | nA | -40°C to 125°C | 4 | ||
| Input Offset Current | IOS | 4 | pA | 4 | |||
| Input Offset Current | IOS | 10 | nA | -40°C to 125°C | 4 | ||
| Quiescent Current per Amplifier | IQ | 170 | μA | 4 | |||
| Gain Bandwidth Product | GBWP | 1.5 | MHz | G=+1 | 4 | ||
| Slew Rate | SR | 1 | V/μs | G=+1 | 4 | ||
| Voltage Noise Density | en | 28 | nV/√Hz | f=1kHz | 4 | ||
| DC Supply Voltage | VS | 3 | 40 | V | Dual supply: ±1.5 to ±20 V | 3 | |
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| Power Supply: +Vs to -Vs | VS | 42 | V | 3 | |||
| Input Voltage (relative to rails, -Vs -0.5V to +Vs +0.5V) | VIN | -0.5 | 0.5 | V | 3 | ||
| Input Current | IIN | -10 | 10 | mA | 3 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Operating Temperature Range | TA | -40 | 125 | °C | 3 | ||
| ESD Susceptibility, HBM | 2000 | V | HBM | 3 | |||
| Package Thermal Resistance, junction-to-ambient | RθJA | 155 | °C/W | SOP8 package | 3 |
CAD (KiCad official)
- Symbol:
COS2170SRB - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cos2170srb-etched.step/cos2170srb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cos2170srb.step/cos2170srb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: COSINE datasheet (10 pp, sha256
79d58f97df21b2d8, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).