3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM3880MFE-1AD
Texas Instruments · Monitors & Reset Circuits · SOT-23-6
LM3880MFE-1AD from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Input supply pin, to be placed as close as possible to the 2.7 V to 5.5 V input supply; absolute maximum is 6 V and 0.1 µF ceramic bypass is suggested where noise is present. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | EN | input | Precision enable input with a 1.25 V (typical) threshold between 1.0 V and 1.4 V and a 7 µA internal pull-up current; its range is -0.3 V to VCC + 0.3 V and it is not recommended to tie it directly to VCC. |
| 4 | FLAG3 | output | Open-drain output 3 that must be pulled up (100 kΩ typical), with a maximum open-drain output current of 50 mA and a low-level output of 0.4 V maximum at 1.2 mA. |
| 5 | FLAG2 | output | Open-drain output 2 that must be pulled up (100 kΩ typical), with a maximum open-drain output current of 50 mA and a low-level output of 0.4 V maximum at 1.2 mA. |
| 6 | FLAG1 | output | Open-drain output 1 that must be pulled up (100 kΩ typical), with a maximum open-drain output current of 50 mA and a low-level output of 0.4 V maximum at 1.2 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Static operating current | IQ | 25 | 80 | µA | 5 | ||
| FLAGx leakage current | IFLAG | 1 | 20 | nA | VFLAGx = 3.3V | 5 | |
| FLAGx low-level output voltage | VOL | 0.4 | V | IFLAGx = 1.2mA | 5 | ||
| EN pin threshold | VEN | 1 | 1.25 | 1.4 | V | 5 | |
| Timer delay 1 accuracy | td1 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 2 accuracy | td2 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 3 accuracy | td3 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 4 accuracy | td4 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 5 accuracy | td5 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 6 accuracy | td6 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay ratio (td(x) - 400µs)/td(x+1) | (td(x), 400µs)/td(x+1) | 95 | 105 | % | 对于 x = 1 或 4 | 5 | |
| Timer delay ratio td(x)/td(x+1) | td(x)/td(x+1) | 95 | 105 | % | 对于 x = 2 或 5 | 5 | |
| Recommended supply voltage | VCC | 2.7 | 5.5 | V | VCC to GND | 4 | |
| Recommended voltage on EN and FLAG pins | EN, FLAG1, FLAG2, FLAG3 | -0.3 | V | 4 | |||
| Recommended junction temperature | -40 | 125 | °C | 4 | |||
| Absolute maximum supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| Absolute maximum voltage on EN and FLAG pins | EN, FLAG1, FLAG2, FLAG3 | -0.3 | 6 | V | 4 | ||
| FLAG maximum output current | 50 | mA | 4 | ||||
| Maximum junction temperature | 150 | °C | 4 | ||||
| Lead temperature (soldering) | 260 | °C | 焊接时,5s | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD rating, human body model (HBM) | V(ESD) | -2 | 2 | kV | 人体放电模型 (HBM),符合 ANSI/ESDA/JEDEC JS-001,所有引脚 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 187.6 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 127.4 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 31.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 23.3 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 31 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
LM3880MFE-1AD - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lm3880mfe-1ad-etched.step/lm3880mfe-1ad-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3880mfe-1ad.step/lm3880mfe-1ad.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
9b876093ccce3670, retrieved 2026-10-28, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).