component
ADR440ARMZ-REEL7
Public Made by Adomby adom
Analog Devices Voltage Reference, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADR440ARMZ-REEL7
Analog Devices · Voltage Reference · MSOP-8
ADR440ARMZ-REEL7 from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; no circuit should be connected to this pin. |
| 2 | VIN | power_in | Input voltage connection, specified for 3 V to 18 V with at least 500 mV headroom above VOUT. |
| 3 | NIC | unconnected | Internally not connected; these pins are not internally interconnected to the rest of the device. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | TRIM | passive | Output voltage trim pin; a potentiometer between VOUT and GND with its wiper here trims the output within 0.5% without affecting performance, and all trim resistors must be low-temperature-coefficient types. |
| 6 | VOUT | power_out | Output voltage; sources up to 10 mA and sinks up to -5 mA, with output short-circuit current of 27 mA. |
| 7 | NIC | unconnected | Internally not connected; these pins are not internally interconnected to the rest of the device. |
| 8 | DNC | unconnected | Do not connect; no circuit should be connected to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, A grade | VOUT | 2.045 | 2.048 | 2.051 | V | 3 | |
| Initial accuracy, A grade | VOERR | -3 | 3 | mV | 3 | ||
| Temperature coefficient, A grade | TCVOUT | 2 | 10 | ppm/°C | −40°C < TA < +125°C | 3 | |
| Line regulation | ΔVOUT/ΔVIN | -20 | 10 | 20 | ppm/V | −40°C < TA < +125°C | 3 |
| Load regulation, sourcing | ΔVOUT/ΔILOAD | -50 | 50 | ppm/mA | ILOAD = 0 mA to 10 mA, VIN = 3.5 V, −40°C < TA < +125°C | 3 | |
| Load regulation, sinking | ΔVOUT/ΔILOAD | -50 | 50 | ppm/mA | ILOAD = 0 mA to −5 mA, VIN = 3.5 V, −40°C < TA < +125°C | 3 | |
| Output current capacity, source (拉电流) | ILOAD | 10 | mA | 3 | |||
| Output current capacity, sink (灌电流) | ILOAD | -5 | mA | 3 | |||
| Quiescent current | IIN | 3 | 3.75 | mA | No load, −40°C < TA < +125°C | 3 | |
| Output voltage noise, p-p | eN p-p | 1 | µV p-p | 0.1 Hz to 10 Hz | 3 | ||
| Output voltage noise density | eN | 45 | nV/√Hz | 1 kHz | 3 | ||
| Turn-on settling time | tR | 10 | µs | 3 | |||
| Long-term stability | ΔVOUT | 50 | ppm | 1000 hours | 3 | ||
| Output voltage hysteresis | VO_HYS | 70 | ppm | 3 | |||
| Ripple rejection ratio | RRR | -80 | dB | fIN = 1 kHz | 3 | ||
| Short-circuit current to ground | ISC | 27 | mA | 3 | |||
| Supply voltage operating range | VIN | 3 | 18 | V | 3 | ||
| Supply headroom | VIN − VO | 500 | mV | 3 | |||
| Power supply voltage (absolute maximum) | 20 | V | 8 | ||||
| Storage temperature range | -65 | 125 | °C | 8 | |||
| Operating temperature range | -40 | 125 | °C | 8 | |||
| Junction temperature range | -65 | 150 | °C | 8 | |||
| Lead temperature, soldering | 300 | °C | 60 s | 8 | |||
| Thermal resistance, junction-to-ambient, 8-lead MSOP (RM suffix) | θJA | 132.5 | °C/W | 8 | |||
| Thermal resistance, junction-to-case, 8-lead MSOP (RM suffix) | θJC | 43.9 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
ADR440ARMZ-REEL7 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
adr440armz-reel7-etched.step/adr440armz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adr440armz-reel7.step/adr440armz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (19 pp, sha256
a92b3ca222681a22, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).