3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC32MK1024GPK100-I
Microchip Tech · Pre-ordered MCUs · TQFP-100(12x12)
PIC32MK1024GPK100-I from Microchip Tech, in a TQFP-100(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AN23/CVD23/PMA23/RG15 | bidirectional | Port RG15 with analog input AN23, CVD23 and PMP address PMA23 (ST input buffer). |
| 2 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 3 | TCK/RPA7/PMD5/RA7 | bidirectional | JTAG test clock input shared with remappable RPA7, PMP data PMD5 and port RA7. |
| 4 | RPB14/VBUSON1/PMD6/RB14 | bidirectional | Port RB14 with remappable RPB14, USB1 VBUS power control output VBUSON1 and PMP data PMD6. |
| 5 | RPB15/PMD7/RB15 | bidirectional | Port RB15 with remappable RPB15 and PMP data PMD7. |
| 6 | RD1 | bidirectional | General-purpose port pin RD1 (ST input buffer). |
| 7 | RD2 | bidirectional | General-purpose port pin RD2 (ST input buffer). |
| 8 | RPD3/RD3 | bidirectional | Port RD3 with remappable peripheral function RPD3. |
| 9 | RPD4/RD4 | bidirectional | Port RD4 with remappable peripheral function RPD4. |
| 10 | AN19/CVD19/RPG6/VBUSON2/PMA5/RG6 | bidirectional | Port RG6 with analog input AN19, CVD19, remappable RPG6, USB2 VBUS power control output VBUSON2 and PMP address PMA5. |
| 11 | AN18/CVD18/RPG7/SCL1/PMA4/RG7 | bidirectional | Port RG7 with analog input AN18, CVD18, remappable RPG7, I2C1 clock SCL1 and PMP address PMA4. |
| 12 | AN17/CVD17/RPG8/SDA1/PMA3/RG8 | bidirectional | Port RG8 with analog input AN17, CVD17, remappable RPG8, I2C1 data SDA1 and PMP address PMA3. |
| 13 | MCLR# | input | Master Clear active-low Reset input (ST); also used for device programming and debugging. |
| 14 | AN16/CVD16/RPG9/PMA2/RG9 | bidirectional | Port RG9 with analog input AN16, CVD16, remappable RPG9 and PMP address PMA2. |
| 15 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 16 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 17 | AN22/CVD22/RG10 | bidirectional | Port RG10 with analog input AN22 and CVD22. |
| 18 | AN21/CVD21/RE8 | bidirectional | Port RE8 with analog input AN21 and CVD21. |
| 19 | AN20/CVD20/RE9 | bidirectional | Port RE9 with analog input AN20 and CVD20. |
| 20 | AN10/CVD10/RPA12/RA12 | bidirectional | Port RA12 with analog input AN10, CVD10 and remappable RPA12. |
| 21 | AN9/CVD9/RPA11/RA11 | bidirectional | Port RA11 with analog input AN9, CVD9 and remappable RPA11. |
| 22 | OA2OUT/AN0/C2IN4-/C4IN3-/RPA0/RA0 | bidirectional | Port RA0 with Op amp 2 output OA2OUT, analog input AN0, comparator inputs C2IN4-/C4IN3- and remappable RPA0. |
| 23 | OA2IN+/AN1/C2IN1+/RPA1/RA1 | bidirectional | Port RA1 with Op amp 2 positive input OA2IN+, analog input AN1, comparator input C2IN1+ and remappable RPA1. |
| 24 | PGD3/OA2IN-/AN2/C2IN1-/RPB0/CTED2/RB0 | bidirectional | Port RB0 with programming/debug data channel 3 (PGD3), Op amp 2 negative input, analog input AN2, C2IN1-, RPB0 and CTMU edge input CTED2. |
| 25 | PGC3/OA1OUT/AN3/C1IN4-/C4IN2-/RPB1/CTED1/RB1 | bidirectional | Port RB1 with programming/debug clock channel 3 (PGC3), Op amp 1 output, analog input AN3, C1IN4-/C4IN2-, RPB1 and CTMU edge input CTED1. |
| 26 | PGC1/OA1IN+/AN4/C1IN1+/C1IN3-/C2IN3-/RPB2/RB2 | bidirectional | Port RB2 with programming/debug clock channel 1 (PGC1), Op amp 1 positive input, analog input AN4, comparator inputs and remappable RPB2. |
| 27 | PGD1/OA1IN-/AN5/CTCMP/C1IN1-/RTCC/RPB3/RB3 | bidirectional | Port RB3 with programming/debug data channel 1 (PGD1), Op amp 1 negative input, AN5, CTMU capacitor input CTCMP, C1IN1-, RTCC output and RPB3. |
| 28 | VREF-/AN33/CVD33/PMA7/RF9 | power_in | Port RF9 with analog voltage reference (low) input VREF-, analog input AN33, CVD33 and PMP address PMA7. |
| 29 | VREF+/AN34/CVD34/PMA6/RF10 | power_in | Port RF10 with analog voltage reference (high) input VREF+, analog input AN34, CVD34 and PMP address PMA6. |
| 30 | AVDD | power_in | Positive supply for analog modules; must be connected at all times, even if the ADC is not used. |
| 31 | AVSS | power_in | Ground reference for analog modules; must be connected at all times, even if the ADC is not used. |
| 32 | OA3OUT/AN6/CVD6/C3IN4-/C4IN1+/C4IN4-/RPC0/RC0 | bidirectional | Port RC0 with Op amp 3 output OA3OUT, analog input AN6, CVD6, comparator inputs and remappable RPC0. |
| 33 | OA3IN-/AN7/CVD7/C3IN1-/C4IN1-/RPC1/RC1 | bidirectional | Port RC1 with Op amp 3 negative input OA3IN-, analog input AN7, CVD7, comparator inputs and remappable RPC1. |
| 34 | OA3IN+/AN8/CVD8/C3IN1+/C3IN3-/RPC2/PMA13/RC2 | bidirectional | Port RC2 with Op amp 3 positive input OA3IN+, analog input AN8, CVD8, comparator inputs, remappable RPC2 and PMP address PMA13. |
| 35 | AN11/CVD11/C1IN2-/PMA12/RC11 | bidirectional | Port RC11 with analog input AN11, CVD11, comparator input C1IN2- and PMP address PMA12. |
| 36 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 37 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 38 | AN35/CVD35/RG11 | bidirectional | Port RG11 with analog input AN35 and CVD35. |
| 39 | AN36/CVD36/RF13 | bidirectional | Port RF13 with analog input AN36 and CVD36. |
| 40 | AN37/CVD37/RF12 | bidirectional | Port RF12 with analog input AN37 and CVD37. |
| 41 | AN12/CVD12/C2IN2-/C5IN2-/SDA4/PMA11/RE12 | bidirectional | Port RE12 with analog input AN12, CVD12, comparator inputs C2IN2-/C5IN2-, I2C4 data SDA4 and PMP address PMA11. |
| 42 | AN13/CVD13/C3IN2-/SCL4/PMA10/RE13 | bidirectional | Port RE13 with analog input AN13, CVD13, comparator input C3IN2-, I2C4 clock SCL4 and PMP address PMA10. |
| 43 | AN14/CVD14/RPE14/PMA1/RE14 | bidirectional | Port RE14 with analog input AN14, CVD14, remappable RPE14 and PMP address PMA1. |
| 44 | AN15/CVD15/RPE15/PMA0/RE15 | bidirectional | Port RE15 with analog input AN15, CVD15, remappable RPE15 and PMP address PMA0. |
| 45 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 46 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 47 | AN38/CVD38/RD14 | bidirectional | Port RD14 with analog input AN38 and CVD38. |
| 48 | AN39/CVD39/RD15 | bidirectional | Port RD15 with analog input AN39 and CVD39. |
| 49 | TDI/DAC3/AN26/CVD26/RPA8/SDA2/PMA9/RA8 | bidirectional | Port RA8 with JTAG test data input TDI, 12-bit CDAC3 output, analog input AN26, CVD26, RPA8, I2C2 data SDA2 and PMP address PMA9. |
| 50 | RPB4/SCL2/PMA8/RB4 | bidirectional | Port RB4 with remappable RPB4, I2C2 clock SCL2 and PMP address PMA8. |
| 51 | OA5IN+/DAC1/AN24/CVD24/C5IN1+/C5IN3-/RPA4/RA4 | bidirectional | Port RA4 with Op amp 5 positive input OA5IN+, 12-bit CDAC1 output, analog input AN24, CVD24, comparator inputs and remappable RPA4. |
| 52 | AN40/CVD40/RPE0/RE0 | bidirectional | Port RE0 with analog input AN40, CVD40 and remappable RPE0. |
| 53 | AN41/CVD41/RPE1/RE1 | bidirectional | Port RE1 with analog input AN41, CVD41 and remappable RPE1. |
| 54 | VBUS1 | input | USB1 bus power monitor analog input; tie to VSS if USB1 is not used. |
| 55 | VUSB3V3 | power_in | USB internal transceiver supply; this pin must be connected to VDD. |
| 56 | D1- | bidirectional | USB1 D- analog I/O; tie through 10k to VSS if USB1 is not used. |
| 57 | D1+ | bidirectional | USB1 D+ analog I/O; tie through 10k to VSS if USB1 is not used. |
| 58 | VBUS2 | input | USB2 bus power monitor analog input; tie to VSS if USB2 is not used. |
| 59 | D2- | bidirectional | USB2 D- analog I/O; tie through 10k to VSS if USB2 is not used. |
| 60 | D2+ | bidirectional | USB2 D+ analog I/O; tie through 10k to VSS if USB2 is not used. |
| 61 | AN45/CVD45/RF5 | bidirectional | Port RF5 with analog input AN45 and CVD45. |
| 62 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 63 | OSCI/CLKI/AN49/CVD49/RPC12/RC12 | bidirectional | Oscillator crystal input (ST buffer in RC mode, CMOS otherwise) and external clock input CLKI, shared with AN49, CVD49, RPC12 and port RC12. |
| 64 | OSCO/CLKO/RPC15/RC15 | bidirectional | Oscillator crystal output, optionally CLKO in FRC and EC modes, shared with RPC15 and port RC15. |
| 65 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 66 | AN46/CVD46/RPA14/RA14 | bidirectional | Port RA14 with analog input AN46, CVD46 and remappable RPA14. |
| 67 | AN47/CVD47/RPA15/RA15 | bidirectional | Port RA15 with analog input AN47, CVD47 and remappable RPA15. |
| 68 | RD8 | bidirectional | General-purpose port pin RD8 per the pin table (Table 1-21 separately calls pin 68 a low-power-logic VDD pin needing a 1 uF ceramic bypass). |
| 69 | PGD2/RPB5/SDA3/USBID1/RB5 | bidirectional | Port RB5 with programming/debug data channel 2 (PGD2), remappable RPB5, I2C3 data SDA3 and USB1 OTG ID detect USBID1. |
| 70 | PGC2/RPB6/SCL3/SCK2/PMA15/RB6 | bidirectional | Port RB6 with programming/debug clock channel 2 (PGC2), remappable RPB6, I2C3 clock SCL3, SPI2 clock SCK2 and PMP address PMA15. |
| 71 | DAC2/AN48/CVD48/RPC10/PMA14/PMCS/RC10 | bidirectional | Port RC10 with 12-bit CDAC2 output, analog input AN48, CVD48, remappable RPC10 and PMP address PMA14/chip select. |
| 72 | OA5OUT/AN25/CVD25/C5IN4-/RPB7/SCK1/INT0/RB7 | bidirectional | Port RB7 with Op amp 5 output OA5OUT, analog input AN25, CVD25, C5IN4-, RPB7, SPI1 clock SCK1 and external interrupt INT0. |
| 73 | SOSCI/RPC13/RC13 | input | 32.768 kHz secondary oscillator crystal input; RPC13/RC13 functions are input-only and slower, with no change notification. |
| 74 | SOSCO/RPB8/T1CK/RB8 | input | 32.768 kHz secondary oscillator crystal output shared with Timer1 clock input T1CK; the RPB8/RB8 functions are input-only and slower, with no change notification. |
| 75 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 76 | TMS/OA5IN-/AN27/CVD27/LVDIN/C5IN1-/RPB9/RB9 | bidirectional | Port RB9 with JTAG test mode select TMS, Op amp 5 negative input, analog input AN27, CVD27, LVDIN, C5IN1- and RPB9. |
| 77 | RPC6/USBID2/PMA16/RC6 | bidirectional | Port RC6 with remappable RPC6, USB2 OTG ID detect USBID2 and PMP address PMA16. |
| 78 | RPC7/PMA17/RC7 | bidirectional | Port RC7 with remappable RPC7 and PMP address PMA17. |
| 79 | PMD12/RD12 | bidirectional | Port RD12 with PMP data PMD12. |
| 80 | PMD13/RD13 | bidirectional | Port RD13 with PMP data PMD13. |
| 81 | RPC8/PMWR/RC8 | bidirectional | Port RC8 with remappable RPC8 and PMP write strobe PMWR. |
| 82 | RPD5/PMRD/RD5 | bidirectional | Port RD5 with remappable RPD5 and PMP read strobe PMRD. |
| 83 | RPD6/PMD14/RD6 | bidirectional | Port RD6 with remappable RPD6 and PMP data PMD14. |
| 84 | RPC9/PMD15/RC9 | bidirectional | Port RC9 with remappable RPC9 and PMP data PMD15. |
| 85 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 86 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 87 | RPF0/PMD11/RF0 | bidirectional | Port RF0 with remappable RPF0 and PMP data PMD11. |
| 88 | RPF1/PMD10/RF1 | bidirectional | Port RF1 with remappable RPF1 and PMP data PMD10. |
| 89 | RPG1/PMD9/RG1 | bidirectional | Port RG1 with remappable RPG1 and PMP data PMD9. |
| 90 | RPG0/PMD8/RG0 | bidirectional | Port RG0 with remappable RPG0 and PMP data PMD8. |
| 91 | TRCLK/PMA18/RF6 | bidirectional | Port RF6 with trace clock output TRCLK and PMP address PMA18. |
| 92 | TRD3/PMA19/RF7 | bidirectional | Port RF7 with trace data bit 3 output TRD3 and PMP address PMA19. |
| 93 | RPB10/PMD0/RB10 | bidirectional | Port RB10 with remappable RPB10 and PMP data PMD0. |
| 94 | RPB11/PMD1/RB11 | bidirectional | Port RB11 with remappable RPB11 and PMP data PMD1. |
| 95 | TRD2/PMA20/RG14 | bidirectional | Port RG14 with trace data bit 2 output TRD2 and PMP address PMA20. |
| 96 | TRD1/RPG12/PMA21/RG12 | bidirectional | Port RG12 with trace data bit 1 output TRD1, remappable RPG12 and PMP address PMA21. |
| 97 | TRD0/PMA22/RG13 | bidirectional | Port RG13 with trace data bit 0 output TRD0 and PMP address PMA22. |
| 98 | RPB12/PMD2/RB12 | bidirectional | Port RB12 with remappable RPB12 and PMP data PMD2. |
| 99 | RPB13/CTPLS/PMD3/RB13 | bidirectional | Port RB13 with remappable RPB13, CTMU pulse generator output CTPLS and PMP data PMD3. |
| 100 | TDO/PMD4/RA10 | bidirectional | Port RA10 with JTAG test data output TDO and PMP data PMD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-100(12x12) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage | VDD | 2.3 | 3.6 | V | Operating Conditions | 1 | |
| CPU frequency, industrial temperature | 0 | 120 | MHz | -40ºC to +85ºC | 1 | ||
| CPU frequency, extended temperature | 0 | 80 | MHz | -40ºC to +125ºC | 1 | ||
| FRC internal oscillator frequency accuracy | -4 | 8 | 4 | % | 8 MHz FRC, -40ºC to +85ºC (typ is 8 MHz) | 1 | |
| Internal temperature sensor accuracy | -2 | 2 | ºC | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | CLR or INV register, the base register must be read. 13.3 Peripheral Pin Select (PPS) | 251 |
CAD (KiCad official)
- Symbol:
PIC32MK1024GPK100-I - Footprint:
Package_QFP:TQFP-100_12x12mm_P0.4mm - 3D model: TQFP-100(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic32mk1024gpk100-i-etched.step/pic32mk1024gpk100-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mk1024gpk100-i.step/pic32mk1024gpk100-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (783 pp, sha256
48a2bf8c128b23ed, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).