component
STM32F038C6T6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32F038C6T6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
STM32F038C6T6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup power supply for RTC and backup registers |
| 2 | PC13 | bidirectional | GPIO port C pin 13, TC type I/O with RTC functions (RTC_TAMP1, RTC_TS, RTC_OUT, WKUP2) |
| 3 | PC14 | bidirectional | GPIO port C pin 14 / 32 kHz oscillator input (OSC32_IN), TC type I/O |
| 4 | PC15 | bidirectional | GPIO port C pin 15 / 32 kHz oscillator output (OSC32_OUT), TC type I/O |
| 5 | PF0 | bidirectional | GPIO port F pin 0 / main oscillator input (4-32 MHz), FT 5V-tolerant I/O |
| 6 | PF1 | bidirectional | GPIO port F pin 1 / main oscillator output, FT 5V-tolerant I/O |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor, active low device reset |
| 8 | VSSA | power_in | Analog ground |
| 9 | VDDA | power_in | Analog power supply, 2.4 to 3.6 V from separate supply or from VDD |
| 10 | PA0 | bidirectional | GPIO port A pin 0, TTa type 3.3V I/O with ADC channel 0 (ADC_IN0) |
| 11 | PA1 | bidirectional | GPIO port A pin 1, TTa type 3.3V I/O with ADC channel 1 (ADC_IN1) |
| 12 | PA2 | bidirectional | GPIO port A pin 2, TTa type 3.3V I/O with ADC channel 2 (ADC_IN2) |
| 13 | PA3 | bidirectional | GPIO port A pin 3, TTa type 3.3V I/O with ADC channel 3 (ADC_IN3) |
| 14 | PA4 | bidirectional | GPIO port A pin 4, TTa type 3.3V I/O with ADC channel 4 (ADC_IN4) |
| 15 | PA5 | bidirectional | GPIO port A pin 5, TTa type 3.3V I/O with ADC channel 5 (ADC_IN5) |
| 16 | PA6 | bidirectional | GPIO port A pin 6, TTa type 3.3V I/O with ADC channel 6 (ADC_IN6) |
| 17 | PA7 | bidirectional | GPIO port A pin 7, TTa type 3.3V I/O with ADC channel 7 (ADC_IN7) |
| 18 | PB0 | bidirectional | GPIO port B pin 0, TTa type 3.3V I/O with ADC channel 8 (ADC_IN8) |
| 19 | PB1 | bidirectional | GPIO port B pin 1, TTa type 3.3V I/O with ADC channel 9 (ADC_IN9) |
| 20 | NPOR | input | Device power-on reset input with embedded weak pull-up resistor, powered from VDDA |
| 21 | PB10 | bidirectional | GPIO port B pin 10, FTf 5V-tolerant FM+ capable I/O for I2C1_SCL or TIM2_CH3 |
| 22 | PB11 | bidirectional | GPIO port B pin 11, FTf 5V-tolerant FM+ capable I/O for I2C1_SDA or TIM2_CH4 |
| 23 | VSS | power_in | Digital ground |
| 24 | VDD | power_in | Digital power supply |
| 25 | PB12 | bidirectional | GPIO port B pin 12, FT 5V-tolerant I/O for TIM1_BKIN, SPI1_NSS, or EVENTOUT |
| 26 | PB13 | bidirectional | GPIO port B pin 13, FT 5V-tolerant I/O for TIM1_CH1N or SPI1_SCK |
| 27 | PB14 | bidirectional | GPIO port B pin 14, FT 5V-tolerant I/O for TIM1_CH2N or SPI1_MISO |
| 28 | PB15 | bidirectional | GPIO port B pin 15, FT 5V-tolerant I/O for TIM1_CH3N, SPI1_MOSI, or RTC_REFIN |
| 29 | PA8 | bidirectional | GPIO port A pin 8, FT 5V-tolerant I/O for USART1_CK, TIM1_CH1, MCO, or EVENTOUT |
| 30 | PA9 | bidirectional | GPIO port A pin 9, FTf 5V-tolerant FM+ capable I/O for USART1_TX, TIM1_CH2, or I2C1_SCL |
| 31 | PA10 | bidirectional | GPIO port A pin 10, FTf 5V-tolerant FM+ capable I/O for USART1_RX, TIM1_CH3, or I2C1_SDA |
| 32 | PA11 | bidirectional | GPIO port A pin 11, FT 5V-tolerant I/O for USART1_CTS, TIM1_CH4, or EVENTOUT |
| 33 | PA12 | bidirectional | GPIO port A pin 12, FT 5V-tolerant I/O for USART1_RTS, TIM1_ETR, or EVENTOUT |
| 34 | PA13 | bidirectional | GPIO port A pin 13 / SWDIO, FT 5V-tolerant I/O with internal pull-up for IR_OUT or SWDIO |
| 35 | PF6 | bidirectional | GPIO port F pin 6, FTf 5V-tolerant FM+ capable I/O for I2C1_SCL |
| 36 | PF7 | bidirectional | GPIO port F pin 7, FTf 5V-tolerant FM+ capable I/O for I2C1_SDA |
| 37 | PA14 | bidirectional | GPIO port A pin 14 / SWCLK, FT 5V-tolerant I/O with internal pull-down for USART1_TX or SWCLK |
| 38 | PA15 | bidirectional | GPIO port A pin 15, FT 5V-tolerant I/O for SPI1_NSS, I2S1_WS, TIM2_CH_ETR, EVENTOUT, or USART1_RX |
| 39 | PB3 | bidirectional | GPIO port B pin 3, FT 5V-tolerant I/O for SPI1_SCK, I2S1_CK, TIM2_CH2, or EVENTOUT |
| 40 | PB4 | bidirectional | GPIO port B pin 4, FT 5V-tolerant I/O for SPI1_MISO, I2S1_MCK, TIM3_CH1, or EVENTOUT |
| 41 | PB5 | bidirectional | GPIO port B pin 5, FT 5V-tolerant I/O for SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, or TIM3_CH2 |
| 42 | PB6 | bidirectional | GPIO port B pin 6, FTf 5V-tolerant FM+ capable I/O for I2C1_SCL, USART1_TX, or TIM16_CH1N |
| 43 | PB7 | bidirectional | GPIO port B pin 7, FTf 5V-tolerant FM+ capable I/O for I2C1_SDA, USART1_RX, or TIM17_CH1N |
| 44 | BOOT0 | input | Boot memory selection input |
| 45 | PB8 | bidirectional | GPIO port B pin 8, FTf 5V-tolerant FM+ capable I/O for I2C1_SCL or TIM16_CH1 |
| 46 | PB9 | bidirectional | GPIO port B pin 9, FTf 5V-tolerant FM+ capable I/O for I2C1_SDA, IR_OUT, TIM17_CH1, or EVENTOUT |
| 47 | VSS | power_in | Digital ground |
| 48 | VDD | power_in | Digital power supply |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
STM32F038C6T6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32f038c6t6-etched.step/stm32f038c6t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f038c6t6.step/stm32f038c6t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (102 pp, sha256
e98b7088fad6d510, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).