component
TPS77801PWPR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS77801PWPR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HTSSOP-20
TPS77801PWPR from Texas Instruments, in a HTSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND/HSINK | power_in | Ground/heatsink terminal, one of eight GND/HSINK pins (1, 2, 9, 10, 11, 12, 19, 20) that serve as regulator ground and heatsink on the PowerPAD package. |
| 2 | GND/HSINK | power_in | Ground/heatsink terminal, one of eight GND/HSINK pins (1, 2, 9, 10, 11, 12, 19, 20) that serve as regulator ground and heatsink on the PowerPAD package. |
| 3 | GND | power_in | Regulator ground pin. |
| 4 | NC | unconnected | No internal connection. |
| 5 | EN | input | Enable input; applying a TTL high signal shuts down the regulator, and EN should be tied to ground if the shutdown feature is not used. |
| 6 | IN | power_in | Input voltage pin for the regulator (IN pins 6 and 7 are both input). |
| 7 | IN | power_in | Input voltage pin for the regulator (IN pins 6 and 7 are both input). |
| 8 | NC | unconnected | No internal connection. |
| 9 | GND/HSINK | power_in | Ground/heatsink terminal, one of eight GND/HSINK pins (1, 2, 9, 10, 11, 12, 19, 20) that serve as regulator ground and heatsink on the PowerPAD package. |
| 10 | GND/HSINK | power_in | Ground/heatsink terminal, one of eight GND/HSINK pins (1, 2, 9, 10, 11, 12, 19, 20) that serve as regulator ground and heatsink on the PowerPAD package. |
| 11 | GND/HSINK | power_in | Ground/heatsink terminal, one of eight GND/HSINK pins (1, 2, 9, 10, 11, 12, 19, 20) that serve as regulator ground and heatsink on the PowerPAD package. |
| 12 | GND/HSINK | power_in | Ground/heatsink terminal, one of eight GND/HSINK pins (1, 2, 9, 10, 11, 12, 19, 20) that serve as regulator ground and heatsink on the PowerPAD package. |
| 13 | OUT | power_out | Regulated output voltage; an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω is required from OUT to GND for stability. |
| 14 | OUT | power_out | Regulated output voltage; an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω is required from OUT to GND for stability. |
| 15 | FB/NC | input | Feedback input that senses the output voltage to close the loop for the adjustable version (TPS77801); routing should minimize noise pickup, as FB connects to a high-impedance amplifier. |
| 16 | PG | output | Power-good output of the TPS778xx, which is an active-high output usable for a power-on reset or low-battery indicator. |
| 17 | NC | unconnected | No internal connection. |
| 18 | NC | unconnected | No internal connection. |
| 19 | GND/HSINK | power_in | Ground/heatsink terminal, one of eight GND/HSINK pins (1, 2, 9, 10, 11, 12, 19, 20) that serve as regulator ground and heatsink on the PowerPAD package. |
| 20 | GND/HSINK | power_in | Ground/heatsink terminal, one of eight GND/HSINK pins (1, 2, 9, 10, 11, 12, 19, 20) that serve as regulator ground and heatsink on the PowerPAD package. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20 |
| Category | Power Management (PMIC) |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VI | 2.7 | 10 | V | Minimum VIN = VOUT + VDO or 2.7 V, whichever is greater | 6 | |
| Output voltage range (TPS77801) | VO | 1.2 | 5.5 | V | TPS77801 option | 6 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 6 | ||
| Input voltage range | VI | -0.3 | 13.5 | V | Voltages with respect to network ground | 6 | |
| Voltage range at EN | -0.3 | 16.5 | V | 6 | |||
| Maximum PG voltage | 16.5 | V | TPS778xx | 6 | |||
| Output voltage (OUT, FB) | VO | 7 | V | 6 | |||
| Operating junction temperature range | TJ | -40 | 125 | °C | 6 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 6 | ||
| ESD rating, HBM | 2 | kV | HBM | 6 | |||
| Output voltage tolerance (TPS77801) | VO | 0.98 | 1.02 | VO | 1.2 V ≤ VO ≤ 5.5 V | 7 | |
| Output current limit | 1.2 | 1.7 | 2 | A | VO = 0 V | 7 | |
| Input current (EN) | -1 | 0 | 1 | µA | EN = 0 V | 8 | |
| Input current (EN) | -1 | 1 | µA | EN = VI | 8 | ||
| High level enable input voltage | 1.7 | V | 7 | ||||
| Low level enable input voltage | 0.9 | V | 7 | ||||
| PG trip threshold voltage | 92 | 98 | %VO | VO decreasing (TPS778xx) | 8 | ||
| PG output low voltage | 0.15 | 0.4 | V | VI = 2.7 V, IO(PG) = 1 mA | 8 | ||
| Power rating, PWP, TA < 25°C, 0 CFM | 2.9 | W | PWP§ package, 0 CFM air flow, TA < 25°C | 6 | |||
| Power rating, PWP, TA < 25°C, 300 CFM | 4.3 | W | PWP§ package, 300 CFM air flow, TA < 25°C | 6 | |||
| Power rating, PWP, TA < 25°C, 0 CFM | 3 | W | PWP¶ package, 0 CFM air flow, TA < 25°C | 6 | |||
| Power rating, PWP, TA < 25°C, 300 CFM | 7.2 | W | PWP¶ package, 300 CFM air flow, TA < 25°C | 6 |
CAD (KiCad official)
- Symbol:
TPS77801PWPR - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps77801pwpr-etched.step/tps77801pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps77801pwpr.step/tps77801pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
011757d41db41f42, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).