Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC4830YMM

Microchip Tech · Other Lighting Drivers · MSOP-8

MIC4830YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply input for internal circuitry, 1.8V to 5.5V.
2 RSW input Sets the internal power MOSFET switching frequency through an external resistor to VDD; connecting the resistor to GND disables the switch oscillator and shuts down the device.
3 REL input Sets the EL frequency of the internal H-bridge driver through an external resistor to VDD; connecting the resistor to GND disables the EL oscillator.
4 GND power_in Ground reference for the device.
5 SW input Switch node connected to the internal high-voltage power MOSFET drain.
6 CS power_out Regulated boost output that connects to the boost output capacitor and the cathode of the external diode; CS can reach up to 110V per the application notes.
7 VB power_in EL lamp drive output connected to one end of the EL lamp; polarity is not important.
8 VA output EL lamp drive output connected to one end of the EL lamp; polarity is not important.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
On-resistance 3.8 7 Ω ISW = 100mA 3
CS Voltage Variation VCS 76 88 99 V VDD = 1.8V to 5.5V 3
Enable Input Low Voltage (turn-off) 0.5 V VDD = 1.8V to 5.5V 3
Shutdown current 0.01 0.5 µA RSW Resistor = LOW; REL Resistor = LOW; VDD = 5.5V 3
Input supply current 45 75 µA RSW Resistor = HIGH; REL Resistor = HIGH; VCS = 90V; VA, VB OPEN 3
VA, VB output drive frequency 158 200 242 Hz REL=1.78MΩ 3
Switching transistor frequency 90 112 134 kHz RSW = 332KΩ 3
Switching frequency accuracy fSW -20 20 % Switching frequency range 65kHz to 250kHz 7
EL lamp frequency accuracy fEL -20 20 % EL lamp frequency range 60Hz to 1000Hz 7
Input current including inductor 15 mA VIN = VDD = 3.2V; RSW = 290KΩ; REL = 1.78MΩ; L=220µH; ROUT = 10kΩ; Lamp = 2in2 3
Switching transistor duty cycle 90 % 3
Supply Voltage (VDD) absolute maximum VDD -0.5 6 V 3
Output Voltage absolute maximum VCS -0.5 120 V 3
Switch Voltage absolute maximum Vsw -0.5 120 V 3
Storage Temperature TS -65 150 °C 3
ESD Rating 1.5 kV Human body model, 1.5k in series with 100pF 3
Supply Voltage (VDD) operating VDD 1.8 5.5 V 3
Lamp Drive Frequency operating fEL 60 1000 Hz 3
Switching Frequency operating fSW 65 250 kHz 3
Ambient Temperature operating TA -40 85 °C 3

CAD (KiCad official)

  • Symbol: MIC4830YMM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mic4830ymm-etched.step / mic4830ymm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4830ymm.step / mic4830ymm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (12 pp, sha256 50067594346e60ec, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF