Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NSI1050-DSWR

NOVOSENSE · CAN ICs · SOP-16-300mil

NSI1050-DSWR from NOVOSENSE, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Power supply for side 1, specified at 2.5V to 5.5V in the recommended operating conditions.
2 GND1 power_in Ground 1, the ground reference for isolator side 1.
3 RXD output CAN receive data output, LOW for dominant and HIGH for recessive bus states.
4 NC unconnected No connection.
5 NC unconnected No connection.
6 TXD input CAN transmit data input, LOW for dominant and HIGH for recessive bus states.
7 GND1 power_in Ground 1, the ground reference for isolator side 1.
8 GND1 power_in Ground 1, the ground reference for isolator side 1.
9 GND2 power_in Ground 2, the ground reference for isolator bus side.
10 GND2 power_in Ground 2, the ground reference for isolator bus side.
11 NC unconnected No connection.
12 CANL bidirectional Low-level CAN bus line.
13 CANH bidirectional High-level CAN bus line.
14 NC unconnected No connection.
15 GND2 power_in Ground 2, the ground reference for isolator bus side.
16 VDD2 power_in Power supply for bus side, specified at 4.5V to 5.5V in the recommended operating conditions.

Key specifications

Parameter Value
Manufacturer NOVOSENSE
Package SOP-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VDD1, VDD2 -0.5 6.5 V 4
Maximum BUS Pin Voltage VCANH, VCANL -40 40 V 4
Output current Io -15 15 mA 4
Operating Temperature Topr -40 125 ℃ 4
Storage Temperature Tstg -40 150 ℃ 4
Electrostatic discharge HBM HBM -6000 6000 V 4
Electrostatic discharge CDM CDM -2000 2000 V 4
Supply voltage, controller side VCC1 2.5 5.5 V 4
Supply voltage, bus side VCC2 4.5 5 5.5 V 4
Voltage at bus pins (separately or common mode) VI or VIC -12 12 V separately or common mode 4
High-level input voltage VIH 2 5.25 V TXD 4
Low-level input voltage VIL 0 0.8 V TXD 4
High-level output current IOH -70 mA Driver 4
High-level output current IOH -4 mA Receiver 4
Low-level output current IOL 70 mA Driver 4
Low-level output current IOL 4 mA Receiver 4
Ambient Temperature TA -40 125 ℃ 5
Junction temperature TJ -40 150 ℃ 5
Logic side supply current IDD1 2.02 3 mA VDD1=5V, TXD=0 5
Logic side supply current IDD1 1.02 1.5 mA VDD1=5V, TXD=VCC1 5
Bus side supply current IDD2 46 70 mA TXD=0V, RLoad =60Ω 5
Thermal-Shutdown Threshold TTS 155 165 180 ℃ 5
Common Mode Transient Immunity CMTI 80 100 kV/us 5
Output Voltage Low VOL 0.4 V IOL = 4mA, RXD pin 6
CANH output voltage (Dominant) VOH(D) 2.8 3.44 4 V VI=0V, RLoad =60Ω 6
CANL output voltage (Dominant) VOL(D) 0.8 1.33 2 V VI=0V, RLoad =60Ω 6
CAN bus output voltage (Recessive) VO(R) 2 2.5 3 V TXD=VCC1, RLoad =60Ω 6
Differential output voltage (Dominant) VOD(D) 1.5 3 V TXD=0, RLoad =60Ω 6
Differential output voltage (Recessive) VOD(R) -0.12 0.012 V TXD=VCC1, RLoad =60Ω, see Figure 2.1 6
Common-mode output voltage VOC 2 2.5 3 V 6
Short-circuit output current IOS -105 -44.1 mA CANH=-12V, CANL open, see Figure 2.10 6
Short-circuit output current IOS 42.5 105 mA CANL=12V, CANH open, see Figure 2.10 6
Positive-going bus input threshold voltage VIT+ 750 900 mV 6
Negative-going bus input threshold voltage VIT- 500 650 mV 6
Hysteresis voltage VHYS 100 mV 6
Input capacitance to ground CI 13 pF CANH or CANL 6
Differential input resistance RID 30 80 kΩ 6
Input resistance RIN 15 30 40 kΩ 6
Input resistance matching RImatch -3 3 % CANH=CANL 6
Common-mode voltage range VCOM -12 12 V 6
High level input current IIH 10 uA TXD pin 5
Low level input current IIL -10 uA TXD pin 5
Input Capacitance CIN 2 pF TXD pin 6
Loop delay1 Tloop1 100 165 210 ns Driver input to receiver output, Recessive to Dominant 7
Loop delay2 Tloop2 80 125 170 ns Driver input to receiver output, Dominant to Recessive 7
Propagation delay time, recessive-to-dominant output tPLH 53 140 ns Driver 7
Propagation delay time, dominant-to-recessive output tPHL 78 110 ns Driver 7
Differential output signal rise time tr 42 ns Driver 7
Differential output signal fall time tf 32 ns Driver 7
Bus dominant time-out time tTXD_DTO 300 468 700 us See Figure 2.9 7
Propagation delay time, low-to-high-level output tPLH 80 100 150 ns Receiver 7
Propagation delay time, high-to-low-level output tPHL 65 80 150 ns Receiver 7
RXD signal rise time tr 3 ns 7
RXD signal fall time tf 3 ns 7
Fail-Safe output delay time from bus-side power loss tfs 4.2 us VDD1=5V 7
Junction-to-ambient thermal resistance SOW16 θJA 76 ℃/W SOW16 column 5
Junction-to-case(top) thermal resistance SOW16 θJC(top) 41 ℃/W SOW16 column 5
Junction-to-board thermal resistance SOW16 θJB 47.7 ℃/W SOW16 column 5

CAD (KiCad official)

  • Symbol: NSI1050-DSWR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: nsi1050-dswr-etched.step / nsi1050-dswr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nsi1050-dswr.step / nsi1050-dswr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NOVOSENSE datasheet, copy hosted by LCSC (22 pp, sha256 7ceaf44bbed0c208, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF