Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F627-20

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-18

PIC16F627-20 from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2/AN2/VREF bidirectional Bi-directional I/O port pin RA2 with Schmitt Trigger input and CMOS output, also analog comparator input AN2 and VREF output.
2 RA3/AN3/CMP1 bidirectional Bi-directional I/O port pin RA3 with Schmitt Trigger input, also analog comparator input AN3 and Comparator 1 CMOS output CMP1.
3 RA4/T0CKI/CMP2 bidirectional Bi-directional I/O port pin RA4 with open-drain output, also Timer0 clock input T0CKI and Comparator 2 open-drain output CMP2.
4 RA5/MCLR/VPP input Input port RA5, Master clear (active low RESET when configured as MCLR) or programming voltage input VPP; voltage on MCLR/VPP must not exceed VDD during normal device operation.
5 VSS power_in Ground reference for logic and I/O pins.
6 RB0/INT bidirectional Bi-directional I/O port pin RB0 with TTL input and optional software-programmed internal weak pull-up, also external interrupt INT.
7 RB1/RX/DT bidirectional Bi-directional I/O port pin RB1 with optional internal weak pull-up, also USART receive pin RX and synchronous data I/O DT.
8 RB2/TX/CK bidirectional Bi-directional I/O port pin RB2, also USART transmit pin TX and synchronous clock I/O CK.
9 RB3/CCP1 bidirectional Bi-directional I/O port pin RB3 with optional internal weak pull-up, also Capture/Compare/PWM I/O CCP1.
10 RB4/PGM bidirectional Bi-directional I/O port pin RB4 with interrupt-on-pin change and optional weak pull-up, also low voltage programming input PGM (interrupt-on-change and weak pull-up disabled when LVP is enabled).
11 RB5 bidirectional Bi-directional I/O port pin RB5 with TTL input, interrupt-on-pin change and optional software-programmed internal weak pull-up.
12 RB6/T1OSO/T1CKI/PGC bidirectional Bi-directional I/O port pin RB6 with interrupt-on-pin change, also Timer1 oscillator output T1OSO, Timer1 clock input T1CKI and ICSP programming clock PGC.
13 RB7/T1OSI/PGD bidirectional Bi-directional I/O port pin RB7 with interrupt-on-pin change, also Timer1 oscillator input T1OSI (wake-up from SLEEP on pin change) and ICSP data I/O PGD.
14 VDD power_in Positive supply for logic and I/O pins.
15 RA6/OSC2/CLKOUT bidirectional Bi-directional I/O port pin RA6, oscillator crystal output OSC2, or CLKOUT at 1/4 the frequency of OSC1 in ER/INTRC mode.
16 RA7/OSC1/CLKIN bidirectional Bi-directional I/O port pin RA7, oscillator crystal input OSC1, or external clock source input CLKIN / ER biasing pin.
17 RA0/AN0 bidirectional Bi-directional I/O port pin RA0 with Schmitt Trigger input and CMOS output, also analog comparator input AN0.
18 RA1/AN1 bidirectional Bi-directional I/O port pin RA1 with Schmitt Trigger input and CMOS output, also analog comparator input AN1.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-18
Category Single Chip Microcomputer/Microcontroller
Pins 18

CAD (KiCad official)

  • Symbol: PIC16F627-20
  • Footprint: Package_DIP:DIP-18_W7.62mm
  • 3D model: PDIP-18 (KiCad packages3D, STEP)
  • 3D model files: pic16f627-20-etched.step / pic16f627-20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f627-20.step / pic16f627-20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (170 pp, sha256 ff7dc3390a276d70, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF