3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16LF84A-04I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil
PIC16LF84A-04I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2 | bidirectional | PORTA bidirectional I/O pin with TTL input buffer. |
| 2 | RA3 | bidirectional | PORTA bidirectional I/O pin with TTL input buffer. |
| 3 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O with Schmitt Trigger input and open-drain output; can also be selected as the clock input to the TMR0 timer/counter. |
| 4 | MCLR | input | Master Clear (active low Reset) input and programming voltage input, Schmitt Trigger input. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | PORTB bidirectional I/O with TTL input (Schmitt Trigger when used as external interrupt); can be selected as the external interrupt pin. |
| 7 | RB1 | bidirectional | PORTB bidirectional I/O pin with TTL input buffer and software-programmable weak pull-up. |
| 8 | RB2 | bidirectional | PORTB bidirectional I/O pin with TTL input buffer and software-programmable weak pull-up. |
| 9 | RB3 | bidirectional | PORTB bidirectional I/O pin with TTL input buffer and software-programmable weak pull-up. |
| 10 | RB4 | bidirectional | PORTB bidirectional I/O pin with TTL input and interrupt-on-change. |
| 11 | RB5 | bidirectional | PORTB bidirectional I/O pin with TTL input and interrupt-on-change. |
| 12 | RB6 | bidirectional | PORTB bidirectional I/O pin with interrupt-on-change; serial programming clock (Schmitt Trigger input in serial programming mode). |
| 13 | RB7 | bidirectional | PORTB bidirectional I/O pin with interrupt-on-change; serial programming data (Schmitt Trigger input in serial programming mode). |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output; connects to crystal or resonator in crystal mode, in RC mode outputs CLKOUT at 1/4 the OSC1 frequency denoting the instruction cycle rate. |
| 16 | OSC1/CLKIN | input | Oscillator crystal input / external clock source input (Schmitt Trigger in RC mode, CMOS otherwise). |
| 17 | RA0 | bidirectional | PORTA bidirectional I/O pin with TTL input buffer. |
| 18 | RA1 | bidirectional | PORTA bidirectional I/O pin with TTL input buffer. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-18-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (16LF84A) | VDD | 2 | 5.5 | V | XT, RC, and LP osc configuration | 49 | |
| Operating temperature (industrial) | TA | -40 | 85 | °C | industrial | 49 | |
| RAM data retention voltage | VDR | 1.5 | V | Device in SLEEP mode | 49 | ||
| VDD rise rate for POR | SVDD | 0.05 | V/ms | 49 | |||
| Supply current (16LF84A) | IDD | 1 | 4 | mA | RC and XT osc configuration (Note 4), FOSC = 2.0 MHz, VDD = 5.5V | 49 | |
| Supply current LP mode (16LF84A) | IDD | 15 | 45 | µA | LP osc configuration, FOSC = 32 kHz, VDD = 2.0V, WDT disabled | 49 | |
| Power-down current (16LF84A) | IPD | 0.4 | 1 | µA | VDD = 2.0V, WDT disabled, industrial | 50 | |
| Input low voltage, I/O TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V (Note 4) | 51 | ||
| Input high voltage, I/O TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V (Note 4) | 51 | ||
| Hysteresis of Schmitt Trigger inputs | VHYS | 0.1 | V | 51 | |||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5.0V, VPIN = VSS | 51 |
| Input leakage current, I/O ports | IIL | 1 | µA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 51 | ||
| Input leakage current, MCLR, RA4/T0CKI | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD | 51 | ||
| Input leakage current, OSC1 | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 51 | ||
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V | 52 | ||
| Output low voltage, OSC2/CLKOUT | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, (RC mode only) | 52 | ||
| Open drain high voltage, RA4 | VOD | 8.5 | V | 52 | |||
| Load capacitance OSC2 | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 52 | ||
| Load capacitance, all I/O pins and OSC2 (RC mode) | CIO | 50 | pF | 52 | |||
| Data EEPROM erase/write cycle time | TDEW | 4 | 8 | ms | 52 | ||
| VDD for FLASH erase/write | VPEW | 4.5 | 5.5 | V | 52 | ||
| FLASH erase/write cycle time | TPEW | 4 | 8 | ms | 52 | ||
| Ambient temperature under bias | -55 | 125 | °C | 47 | |||
| Storage temperature | -65 | 150 | °C | 47 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 47 | ||
| Voltage on MCLR with respect to VSS | -0.3 | 14 | V | Note 1 | 47 | ||
| Voltage on RA4 with respect to VSS | -0.3 | 8.5 | V | 47 | |||
| Maximum current out of VSS pin | 150 | mA | 47 | ||||
| Maximum current into VDD pin | 100 | mA | 47 | ||||
| Maximum current sunk by PORTA | 80 | mA | 47 | ||||
| Maximum current sourced by PORTA | 50 | mA | 47 | ||||
| Maximum current sunk by PORTB | 150 | mA | 47 | ||||
| Maximum current sourced by PORTB | 100 | mA | 47 | ||||
| External CLKIN frequency, XT/RC (-04, LF) | FOSC | 2 | MHz | XT, RC osc (-04, LF) | 55 | ||
| External CLKIN frequency, LP (-04, LF) | FOSC | 200 | kHz | LP osc (-04, LF) | 55 | ||
| External CLKIN period, XT/RC (-04, LF) | TOSC | 500 | ns | XT, RC osc (-04, LF) | 55 | ||
| Clock in (OSC1) high or low time, XT (-04, LF) | TosL, TosH | 60 | ns | XT osc (-04, LF) | 55 | ||
| OSC1 to CLKOUT, extended (LF) | TosH2ckL | 15 | 120 | ns | (Note 1) | 56 | |
| Port output rise time, extended (LF) | TioR | 10 | 70 | ns | 56 | ||
| Port output fall time, extended (LF) | TioF | 10 | 70 | ns | 56 | ||
| INT pin high or low time, extended (LF) | TINP | 55 | ns | 56 |
CAD (KiCad official)
- Symbol:
PIC16LF84A-04I - Footprint:
Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm - 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16lf84a-04i-etched.step/pic16lf84a-04i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf84a-04i.step/pic16lf84a-04i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (90 pp, sha256
33e026b441bd51c2, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).