component
NCV8460ADR2G
Public Made by Adomby adom
onsemi Power Distribution Switches, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCV8460ADR2G
onsemi · Power Distribution Switches · SOIC-8
NCV8460ADR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Device ground; an external reverse-battery resistor RGND is required between this pin and system ground, sized from the datasheet formulas (RGND ≤ 600 mV / Id(on) max and RGND ≥ (−VD) / (−Ignd)). |
| 2 | IN | input | Logic-level control input compatible with 3.3 V / 5 V CMOS, with Vin_low maximum 1.25 V, Vin_high minimum 3.25 V, and input voltage limited to −8 V to 8 V. |
| 3 | STAT | output | Status output that reports open load, overtemperature and current limitation; Vstat_low is at most 0.5 V at Istat = 1.6 mA and status current is limited to ±5 mA. |
| 4 | N/C | unconnected | No connection; the datasheet lists this pin as not connected. |
| 5 | VD | power_in | Supply voltage input with an operating range of 6 V to 36 V and a maximum DC supply rating of 41 V. |
| 6 | OUT | output | Switched high-side output protected by active current limit (Ilim 6 A min, 15 A max) and thermal shutdown, with output clamp voltage of VD − 41 V to VD − 55 V. |
| 7 | OUT | output | Second switched high-side output pin, listed with the same OUT function as pin 6 in the datasheet. |
| 8 | VD | power_in | Supply voltage input with an operating range of 6 V to 36 V and a maximum DC supply rating of 41 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage | VD | -0.3 | 41 | V | 3 | ||
| Input Voltage | Vin | -8 | 8 | V | 3 | ||
| Input Current | Iin | -5 | 5 | mA | 3 | ||
| Status Current | Istatus | -5 | 5 | mA | 3 | ||
| Negative Ground Current | -Ignd | -200 | mA | 3 | |||
| Output Current (Note 1) | Iout | -6 | A | Note 1: reverse output current limited by load | 3 | ||
| Peak Transient Input Voltage | Vpeak | 56 | V | Load dump 42.5 V, VD = 13.5 V, RLOAD = 6.5 Ω, ISO7637-2 pulse 5 | 3 | ||
| Power Dissipation | Ptot | 1.183 | W | TA = 25°C | 3 | ||
| Electrostatic Discharge, Input (HBM) | 4 | kV | HBM model 100 pF / 1500 Ω | 3 | |||
| Electrostatic Discharge, Status (HBM) | 3.5 | kV | HBM model 100 pF / 1500 Ω | 3 | |||
| Electrostatic Discharge, Output (HBM) | 5 | kV | HBM model 100 pF / 1500 Ω | 3 | |||
| Electrostatic Discharge, VD (HBM) | 5 | kV | HBM model 100 pF / 1500 Ω | 3 | |||
| Single Pulse Inductive Load Switching Energy (Note 2) | EAS | 100 | mJ | L = 1.8 mH, Vbat = 13.5 V; IL = 9 A, TJstart = 150°C | 3 | ||
| Operating Junction Temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage Temperature | Tstorage | -55 | 150 | °C | 3 | ||
| Thermal Resistance Junction-to-Lead | RJL | 30 | °C/W | 3 | |||
| Thermal Resistance Junction-to-Ambient (min. Pad) | RJA | 110.8 | °C/W | Min. pad | 3 | ||
| Thermal Resistance Junction-to-Ambient (1 in square pad) | RJA | 105.6 | °C/W | 1 in square pad size, FR-4, 1 oz Cu | 3 | ||
| Operating Supply Voltage | VD | 6 | 36 | V | 4 | ||
| Undervoltage Shutdown | VUV | 3 | 5 | 6 | V | 4 | |
| On Resistance | RON | 60 | mΩ | Iout = 2 A; TJ = 25°C, VD > 8 V | 4 | ||
| On Resistance | RON | 120 | mΩ | Iout = 2 A, VD > 8 V | 4 | ||
| Input Clamp Voltage | Vin_cl | 11 | 12 | 13 | V | Iin = 1 mA | 4 |
| Input Clamp Voltage | Vin_cl | -13 | -12 | -11 | V | Iin = -1 mA | 4 |
| Status Clamp Voltage | Vstat_cl | 10 | 11 | 12 | V | Istat = 1 mA | 4 |
| Status Clamp Voltage | Vstat_cl | -2.2 | -1.2 | -0.6 | V | Istat = -1 mA | 4 |
| Temperature Shutdown | TSD | 150 | 175 | 200 | °C | 4 | |
| Output Current Limit | Ilim | 6 | 9 | 15 | A | 8 V < VD < 36 V | 4 |
| Openload Off State Detection Threshold | VOL | 1.5 | 3.5 | V | Vin = 0 V | 5 |
CAD (KiCad official)
- Symbol:
NCV8460ADR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ncv8460adr2g-etched.step/ncv8460adr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv8460adr2g.step/ncv8460adr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (16 pp, sha256
0919c50ed2e08419, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).