Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LP2951CMMX

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSSOP-8-0.65mm

LP2951CMMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulated output voltage, 5V/3V/3.3V nominal with ±0.5% typical accuracy and 100mA maximum output current
2 SENSE input Output voltage sense input; connect to VOUT for proper feedback regulation and accurate output voltage control
3 SHUTDOWN input Shutdown control input; regulator enabled at voltage <0.6V, disabled when >2.0V with 30µA to 50µA input current
4 GND power_in Ground reference connection for device circuit return path
5 ERROR tri_state Error flag open-collector output; goes low when VOUT drops more than 5% below nominal voltage during dropout condition
6 VTAP output Internal reference divider tap output; nominal 1.235V typical voltage for programming external feedback resistor network
7 FEEDBACK input Feedback input with high impedance; 20nA typical bias current, accepts 1.235V to 29V voltage range for output programming
8 IN power_in Input supply voltage, 2.3V to 30V operating range with 75µA typical quiescent current and 50mV to 450mV dropout voltage

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LP2951CMMX
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: lp2951cmmx-etched.step / lp2951cmmx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2951cmmx.step / lp2951cmmx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (62 pp, sha256 b9e1f8851a20b9c9, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF