LMV722MX-P
Public Unreviewedby Ray
TECH PUBLIC Operational Amplifier, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownLMV722MX-P
TECH PUBLIC · Operational Amplifier · SOP-8
LMV722MX-P from TECH PUBLIC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of amplifier A. Rail-to-rail output stage; can source/sink up to ±50mA short-circuit. |
| 2 | -INA | input | Inverting input of amplifier A. Rail-to-rail input range (Vss-0.2V to Vdd+0.2V); ±100pA max input bias current. |
| 3 | +INA | input | Non-inverting input of amplifier A. Rail-to-rail input range (Vss-0.2V to Vdd+0.2V); ±100pA max input bias current. |
| 4 | -Vs | power_in | Negative supply / ground. Typically tied to GND for single-supply operation; supply range 2.2V to 5.5V between +Vs and -Vs. |
| 5 | +INB | input | Non-inverting input of amplifier B. Rail-to-rail input range (Vss-0.2V to Vdd+0.2V); ±100pA max input bias current. |
| 6 | -INB | input | Inverting input of amplifier B. Rail-to-rail input range (Vss-0.2V to Vdd+0.2V); ±100pA max input bias current. |
| 7 | OUTB | output | Output of amplifier B. Rail-to-rail output stage; can source/sink up to ±50mA short-circuit. |
| 8 | +Vs | power_in | Positive supply. Operating range +2.2V to +5.5V referenced to -Vs; 800µA typical quiescent current per amplifier. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TECH PUBLIC |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LMV722MX-P
CAD (KiCad official)
- Symbol:
LMV722MX-P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lmv722mx-p.step |
122 KB | You want the bare part, or you mark your own boards. |
lmv722mx-p-etched.step |
1.5 MB | You want the part with LMV722MX-P already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 402 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TECH PUBLIC datasheet (5 pp, sha256
95a4068a398602bc, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).