component
ETA5071V330DF1E
Public Made by Adomby adom
etasolution Linear Voltage Regulators (LDO), DFN1x1-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownETA5071V330DF1E
etasolution · Linear Voltage Regulators (LDO) · DFN1x1-4
ETA5071V330DF1E from etasolution, in a DFN1x1-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Output of regulator, fixed-output LDO rated for 300mA output current. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin: drive high to enable the IC and low to disable it; EN can be connected to IN if not used. |
| 4 | VIN | power_in | Input supply pin; input voltage range is 1.8V to 6.5V, and absolute maximum VIN is 7V. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | etasolution |
| Package | DFN1x1-4 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | 1.8 | 6.5 | V | 3 | |||
| Output Current Limit | 350 | 500 | mA | VOUT = 95% | 4 | ||
| Load Regulation | 20 | mV | 0µA ≤ IOUT ≤ 300 mA | 4 | |||
| Output Voltage Range | 1 | 3.6 | V | Available in 100mV steps | 4 | ||
| Vout Voltage accuracy | -2 | 2 | % | IOUT =30mA, VOUT>1.8V | 4 | ||
| EN pin input Logic Low | 0.4 | V | 1.8V ≤ VIN ≤ 5.5V | 4 | |||
| EN pin input Logic High | 1.2 | V | 1.8V ≤ VIN ≤ 5.5V | 4 | |||
| Ground Current | 1 | µA | VEN=VIN, No Load | 3 | |||
| Shutdown Current | 0.3 | µA | VEN = 0V, 1.8V ≤ VIN ≤ 5.5V | 3 | |||
| Dropout Voltage | 0.12 | V | IOUT =100mA, VOUT=2.8V | 4 | |||
| Output Foldback Current Limit | 120 | mA | VOUT = 0V | 4 | |||
| Line Regulation | 0.2 | %/V | VOUT + 1V ≤ VIN ≤ 5.5V | 4 | |||
| Start-up time | 70 | µs | 4 | ||||
| Input current at EN pin | 0 | µA | VEN=VIN | 4 | |||
| Pulldown Resistor | 60 | Ω | Output Discharge Version | 4 | |||
| Thermal Shutdown | 150 | °C | Rising, Hysteresis =10° C | 4 | |||
| Voltage on VIN, EN, VOUT | -0.3 | 7 | V | 3 | |||
| Operating Temperature Range | -40 | 85 | °C | 3 | |||
| Storage Temperature Range | -55 | 150 | °C | 3 | |||
| Thermal Resistance Junction-to-Ambient (DFN1x1-4) | JA | 120 | °C/W | DFN1x1-4 | 3 | ||
| Thermal Resistance Junction-to-Case (DFN1x1-4) | JC | 60 | °C/W | DFN1x1-4 | 3 |
CAD (KiCad official)
- Symbol:
ETA5071V330DF1E - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN1x1-4 (KiCad packages3D, STEP)
- 3D model files:
eta5071v330df1e-etched.step/eta5071v330df1e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eta5071v330df1e.step/eta5071v330df1e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: etasolution datasheet (11 pp, sha256
afcac727edfccbc4, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).