Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OA1NP22C

STMicroelectronics · Operational Amplifier · SC-70-5

OA1NP22C from STMicroelectronics, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Op-amp output. Rail-to-rail swing from VCC- to VCC+ (typical output swing within a few mV of the rails at light load). Drives loads referenced anywhere between the two supply rails.
2 VCC- power_in Negative supply rail (ground in single-supply operation). Together with VCC+ defines the supply voltage; operating range 1.5 V to 5.5 V across the two rails.
3 IN+ input Non-inverting analog input. Rail-to-rail common-mode range (VCC- - 0.1 V to VCC+ + 0.1 V). Input bias current 5 pA max at 25 degC, allowing direct connection to high-impedance sensors.
4 IN- input Inverting analog input. Rail-to-rail common-mode range (VCC- - 0.1 V to VCC+ + 0.1 V). Sets closed-loop gain via external feedback network; unity-gain stable.
5 VCC+ power_in Positive supply rail. Supply voltage (VCC+ minus VCC-) may range from 1.5 V to 5.5 V. Absolute maximum 6 V. Bypass with a local ceramic capacitor to VCC-.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SC-70-5
Category Amplifiers/Comparators
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • OA1NP22C

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) Vcc 6 V 4
Input current Iin 10 mA The input current must be limited by a resistor in series with the inputs. 4
Storage temperature Tstg -65 150 °C 4
Maximum junction temperature Tj 150 °C 4
ESD HBM: human body model HBM 2000 V ESDA/JEDEC JS-001 4
ESD MM: machine model MM 200 V JEDEC JESD22-A115C 4
ESD CDM: charged device model (SC70-5) CDM 900 V SC70-5 package; JEDEC JESD22-C101-E 4
Latch-up immunity 200 mA JEDEC JESD78C 4
Supply voltage (operating) Vcc 1.5 5.5 V 4
Operating free air temperature range Toper -40 85 °C 4
Input offset voltage Vio -3 0.1 3 mV 5
Input offset voltage Vio -3.4 3.4 mV -40 °C < T< 85 °C 5
Input offset voltage drift Vio/T 5 V/°C -40 °C < T< 85 °C 5
Input offset current Iio 1 5 pA 5
Input offset current Iio 30 pA -40 °C < T< 85 °C 5
Input bias current Iib 1 5 pA 5
Input bias current Iib 30 pA -40 °C < T< 85 °C 5
Common mode rejection ratio CMR 65 85 dB Vicm = 0 to 0.6 V, Vout = VCC/2 5
Common mode rejection ratio CMR 65 dB -40 °C < T< 85 °C 5
Common mode rejection ratio CMR 55 74 dB Vicm = 0 to 1.8 V, Vout = VCC/2 5
Common mode rejection ratio CMR 55 dB -40°C < T< 85 °C 5
Large signal voltage gain Avd 95 115 Vout = 0.3 V to (VCC+ - 0.3 V), RL = 100 k 5
Large signal voltage gain Avd 95 -40 °C < T< 85 °C 5
High level output voltage (drop from VCC+) VOH 40 mV RL = 100 k 5
Low level output voltage VOL 40 mV RL = 100 k 5
Output sink current Iout 4 5 mA Vout = VCC, VID = -200 mV 5
Output sink current Iout 4 mA -40 °C < T< 85 °C 5
Output source current Iout 4 5 mA Vout = 0 V, VID = + 200 mV 5
Output source current Iout 4 mA -40 °C < T< 85 °C 5
Supply current (per channel) ICC 580 750 nA No load, Vout = VCC/2 5
Supply current (per channel) ICC 800 nA -40 °C < T< 85 °C 5
Overload recovery time trec 30 µs 100 mV from rail in comparator, RL = 100 k, VID = ±VCC, -40 °C < T< 85 °C 6
Thermal resistance junction to ambient (SC70-5) Rthja 205 °C/W SC70-5 package; Rth are typical values 4

CAD (KiCad official)

  • Symbol: OA1NP22C
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: oa1np22c-etched.step / oa1np22c-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); oa1np22c.step / oa1np22c.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (None pp, sha256 247a4f245f4b0701, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF