3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLP3470IM5-3.08
Texas Instruments · Monitors & Reset Circuits · SOT-23-5
LP3470IM5-3.08 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SRT | output | Set reset time-out pin: connect a capacitor to ground to set tRP = 2000 × C1 (C1 in µF, tRP in ms), or leave it floating if no delay is needed. |
| 2 | GND | power_in | Ground pin. |
| 3 | VCC1 | input | Always connect to pin VCC (pin 4). |
| 4 | VCC | power_in | Supply voltage input (0.5 V to 5.5 V operating) and reset threshold monitor input. |
| 5 | Reset | output | Open-drain, active-low reset output that requires an external pullup resistor and goes low when VCC drops below the reset threshold VRTH. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC voltage | VCC | -0.3 | 6 | V | 4 | ||
| Reset voltage | -0.3 | 6 | V | 4 | |||
| Output current (Reset) | 10 | mA | 4 | ||||
| Power dissipation | 300 | mW | TA = 25°C | 4 | |||
| Lead temperature (soldering, 5 sec) | 260 | °C | soldering, 5 sec | 4 | |||
| Junction temperature | TJMAX | 125 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VCC operating voltage | VCC | 0.5 | 5.5 | V | 4 | ||
| Operating temperature (LP3470I) | TA | -40 | 85 | °C | LP3470I | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 171 | °C/W | DBV (SOT-23) 5 pins | 4 | ||
| VCC operating voltage | VCC | 0.5 | 5.5 | V | TJ = -20°C to 85°C | 5 | |
| VCC supply current | ICC | 30 | µA | VCC = 4.5 V, TJ = -20°C to 85°C | 5 | ||
| Hysteresis voltage | VHYST | 15 | 65 | mV | TJ = -20°C to 85°C | 5 | |
| VCC to reset delay | tPD | 300 | µs | VCC falling at 1 mV/µs, TJ = -20°C to 85°C | 5 | ||
| Reset time-out period | tRP | 1 | 3.5 | ms | C1 = 1 nF, TJ = -20°C to 85°C | 5 | |
| Reset output voltage low | VOL | 0.1 | V | VCC = 0.5 V, IOL = 30 µA, TJ = -20°C to 85°C | 5 | ||
| Reset output voltage low | VOL | 0.4 | V | VCC = VRTH − 100 mV, IOL = 4 mA, TJ = -20°C to 85°C | 5 | ||
| External pullup resistor | R1 | 0.68 | 20 | 68 | kΩ | 5 | |
| Reset output leakage current | ILEAK | 1 | µA | TJ = 25°C | 5 | ||
| Reset output leakage current | ILEAK | 6 | µA | TJ = -20°C to 85°C | 5 |
CAD (KiCad official)
- Symbol:
LP3470IM5-3.08 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp3470im5-3-08-etched.step/lp3470im5-3-08-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3470im5-3-08.step/lp3470im5-3-08.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
99e6639f3b9e22d8, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).