component
GD32F407VGT6
Public Made by Adomby adom
GigaDevice Semicon Beijing Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGD32F407VGT6
GigaDevice Semicon Beijing · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
GD32F407VGT6 from GigaDevice Semicon Beijing, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant I/O (5VT) with default function PE2 and alternate functions TRACECLK, ETH_MII_TXD3, EXMC_A23, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V tolerant I/O (5VT) with default function PE3 and alternate functions TRACED0, EXMC_A19, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V tolerant I/O (5VT) with default function PE4 and alternate functions TRACED1, EXMC_A20, DCI_D4, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V tolerant I/O (5VT) with default function PE5 and alternate functions TRACED2, TIMER8_CH0, EXMC_A21, DCI_D6, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V tolerant I/O (5VT) with default function PE6 and alternate functions TRACED3, TIMER8_CH1, EXMC_A22, DCI_D7, EVENTOUT. |
| 6 | VBAT | power_in | Backup-domain supply pin (default function VBAT); the block diagram shows the backup domain powered by VBAT. |
| 7 | PC13-TAMPER-RTC | bidirectional | 5 V tolerant I/O (5VT) with default function PC13, alternate function EVENTOUT and additional functions RTC_TAMP0, RTC_OUT, RTC_TS. |
| 8 | PC14-OSC32IN | bidirectional | 5 V tolerant I/O (5VT) with default function PC14, alternate function EVENTOUT and additional function OSC32IN. |
| 9 | PC15-OSC32OUT | bidirectional | 5 V tolerant I/O (5VT) with default function PC15, alternate function EVENTOUT and additional function OSC32OUT. |
| 10 | VSS | power_in | Ground pin (default function VSS). |
| 11 | VDD | power_in | Digital supply pin (default function VDD). |
| 12 | PH0 | bidirectional | 5 V tolerant I/O (5VT) with default function PH0, alternate function EVENTOUT and additional function OSCIN. |
| 13 | PH1 | bidirectional | 5 V tolerant I/O (5VT) with default function PH1, alternate function EVENTOUT and additional function OSCOUT. |
| 14 | NRST | input | Reset pin (default function NRST); the extracted pin table gives no type or level code for this pin. |
| 15 | PC0 | bidirectional | 5 V tolerant I/O (5VT) with default function PC0, alternate functions USBHS_ULPI_STP, EXMC_SDNWE, EVENTOUT and additional function ADC012_IN10. |
| 16 | PC1 | bidirectional | 5 V tolerant I/O (5VT) with default function PC1, alternate functions SPI2_MOSI, I2S2_SD, SPI1_MOSI, I2S1_SD, ETH_MDC, EVENTOUT and additional function ADC012_IN11. |
| 17 | PC2 | bidirectional | 5 V tolerant I/O (5VT) with default function PC2, alternate functions SPI1_MISO, I2S1_ADD_SD, USBHS_ULPI_DIR, ETH_MII_TXD2, EXMC_SDNE0, EVENTOUT and additional function ADC012_IN12. |
| 18 | PC3 | bidirectional | 5 V tolerant I/O (5VT) with default function PC3, alternate functions SPI1_MOSI, I2S1_SD, USBHS_ULPI_NXT, ETH_MII_TX_CLK, EXMC_SDCKE0, EVENTOUT and additional function ADC012_IN13. |
| 19 | VDD | power_in | Digital supply pin (default function VDD). |
| 20 | VSSA | power_in | Analog ground pin (default function VSSA). |
| 21 | VREF+ | power_in | Positive voltage reference pin (default function VREF+). |
| 22 | VDDA | power_in | Analog supply pin (default function VDDA); the block diagram shows the SAR ADC and DAC powered by VDDA. |
| 23 | PA0-WKUP | bidirectional | 5 V tolerant I/O (5VT) with default function PA0, alternate functions TIMER1_CH0, TIMER1_ETI, TIMER4_CH0, TIMER7_ETI, USART1_CTS, UART3_TX, ETH_MII_CRS, EVENTOUT and additional functions ADC012_IN0, WKUP. |
| 24 | PA1 | bidirectional | 5 V tolerant I/O (5VT) with default function PA1, alternate functions TIMER1_CH1, TIMER4_CH1, USART1_RTS, UART3_RX, ETH_MII_RX_CLK, ETH_RMII_REF_CLK, EVENTOUT and additional function ADC012_IN1. |
| 25 | PA2 | bidirectional | 5 V tolerant I/O (5VT) with default function PA2, alternate functions TIMER1_CH2, TIMER4_CH2, TIMER8_CH0, I2S_CKIN, USART1_TX, ETH_MDIO, EVENTOUT and additional function ADC012_IN2. |
| 26 | PA3 | bidirectional | 5 V tolerant I/O (5VT) with default function PA3, alternate functions TIMER1_CH3, TIMER4_CH3, TIMER8_CH1, I2S1_MCK, USART1_RX, USBHS_ULPI_D0, ETH_MII_COL, EVENTOUT and additional function ADC012_IN3. |
| 27 | VSS | power_in | Ground pin (default function VSS). |
| 28 | VDD | power_in | Digital supply pin (default function VDD). |
| 29 | PA4 | bidirectional | I/O with TTa level (not 5 V tolerant) and default function PA4, alternate functions SPI0_NSS, SPI2_NSS, I2S2_WS, USART1_CK, USBHS_SOF, DCI_HSYNC, EVENTOUT and additional functions ADC01_IN4, DAC_OUT0. |
| 30 | PA5 | bidirectional | I/O with TTa level (not 5 V tolerant) and default function PA5, alternate functions TIMER1_CH0, TIMER1_ETI, TIMER7_CH0_ON, SPI0_SCK, USBHS_ULPI_CK, EVENTOUT and additional functions ADC01_IN5, DAC_OUT1. |
| 31 | PA6 | bidirectional | 5 V tolerant I/O (5VT) with default function PA6, alternate functions TIMER0_BRKIN, TIMER2_CH0, TIMER7_BRKIN, SPI0_MISO, I2S1_MCK, TIMER12_CH0, SDIO_CMD, DCI_PIXCLK, EVENTOUT and additional function ADC01_IN6. |
| 32 | PA7 | bidirectional | 5 V tolerant I/O (5VT) with default function PA7, alternate functions TIMER0_CH0_ON, TIMER2_CH1, TIMER7_CH0_ON, SPI0_MOSI, TIMER13_CH0, ETH_MII_RX_DV, ETH_RMII_CRS_DV, EXMC_SDNWE, EVENTOUT and additional function ADC01_IN7. |
| 33 | PC4 | bidirectional | 5 V tolerant I/O (5VT) with default function PC4, alternate functions ETH_MII_RXD0, ETH_RMII_RXD0, EXMC_SDNE0, EVENTOUT and additional function ADC01_IN14. |
| 34 | PC5 | bidirectional | 5 V tolerant I/O (5VT) with default function PC5, alternate functions USART2_RX, ETH_MII_RXD1, ETH_RMII_RXD1, EXMC_SDCKE0, EVENTOUT and additional function ADC01_IN15. |
| 35 | PB0 | bidirectional | 5 V tolerant I/O (5VT) with default function PB0, alternate functions TIMER0_CH1_ON, TIMER2_CH2, TIMER7_CH1_ON, SPI2_MOSI, I2S2_SD, USBHS_ULPI_D1, ETH_MII_RXD2, SDIO_D1, EVENTOUT and additional functions ADC01_IN8, IREF. |
| 36 | PB1 | bidirectional | 5 V tolerant I/O (5VT) with default function PB1, alternate functions TIMER0_CH2_ON, TIMER2_CH3, TIMER7_CH2_ON, USBHS_ULPI_D2, ETH_MII_RXD3, SDIO_D2, EVENTOUT and additional function ADC01_IN9. |
| 37 | PB2 | bidirectional | 5 V tolerant I/O (5VT) with default function PB2 and BOOT1, alternate functions TIMER1_CH3, SPI2_MOSI, I2S2_SD, USBHS_ULPI_D4, SDIO_CK, EVENTOUT. |
| 38 | PE7 | bidirectional | 5 V tolerant I/O (5VT) with default function PE7, alternate functions TIMER0_ETI, EXMC_D4, EVENTOUT. |
| 39 | PE8 | bidirectional | 5 V tolerant I/O (5VT) with default function PE8, alternate functions TIMER0_CH0_ON, EXMC_D5, EVENTOUT. |
| 40 | PE9 | bidirectional | 5 V tolerant I/O (5VT) with default function PE9, alternate functions TIMER0_CH0, EXMC_D6, EVENTOUT. |
| 41 | PE10 | bidirectional | 5 V tolerant I/O (5VT) with default function PE10, alternate functions TIMER0_CH1_ON, EXMC_D7, EVENTOUT. |
| 42 | PE11 | bidirectional | 5 V tolerant I/O (5VT) with default function PE11, alternate functions TIMER0_CH1, EXMC_D8, EVENTOUT. |
| 43 | PE12 | bidirectional | 5 V tolerant I/O (5VT) with default function PE12, alternate functions TIMER0_CH2_ON, EXMC_D9, EVENTOUT. |
| 44 | PE13 | bidirectional | 5 V tolerant I/O (5VT) with default function PE13, alternate functions TIMER0_CH2, EXMC_D10, EVENTOUT. |
| 45 | PE14 | bidirectional | 5 V tolerant I/O (5VT) with default function PE14, alternate functions TIMER0_CH3, EXMC_D11, EVENTOUT. |
| 46 | PE15 | bidirectional | 5 V tolerant I/O (5VT) with default function PE15, alternate functions TIMER0_BRKIN, EXMC_D12, EVENTOUT. |
| 47 | PB10 | bidirectional | 5 V tolerant I/O (5VT) with default function PB10, alternate functions TIMER1_CH2, I2C1_SCL, SPI1_SCK, I2S1_CK, I2S2_MCK, USART2_TX, USBHS_ULPI_D3, ETH_MII_RX_ER, SDIO_D7, EVENTOUT. |
| 48 | PB11 | bidirectional | 5 V tolerant I/O (5VT) with default function PB11, alternate functions TIMER1_CH3, I2C1_SDA, I2S_CKIN, USART2_RX, USBHS_ULPI_D4, ETH_MII_TX_EN, ETH_RMII_TX_EN, EVENTOUT. |
| 49 | NC | unconnected | Pin printed as NC in the pin table with default function VCORE; the datasheet gives no further detail for it. |
| 50 | VDD | power_in | Digital supply pin (default function VDD). |
| 51 | PB12 | bidirectional | 5 V tolerant I/O (5VT) with default function PB12, alternate functions TIMER0_BRKIN, I2C1_SMBA, SPI1_NSS, I2S1_WS, USART2_CK, CAN1_RX, USBHS_ULPI_D5, ETH_MII_TXD0, ETH_RMII_TXD0, USBHS_ID, EVENTOUT. |
| 52 | PB13 | bidirectional | 5 V tolerant I/O (5VT) with default function PB13, alternate functions TIMER0_CH0_ON, I2C1_TXFRAME, SPI1_SCK, I2S1_CK, USART2_CTS, CAN1_TX, USBHS_ULPI_D6, ETH_MII_TXD1, ETH_RMII_TXD1, EVENTOUT and additional function USBHS_VBUS. |
| 53 | PB14 | bidirectional | 5 V tolerant I/O (5VT) with default function PB14, alternate functions TIMER0_CH1_ON, TIMER7_CH1_ON, SPI1_MISO, I2S1_ADD_SD, USART2_RTS, TIMER11_CH0, USBHS_DM, EVENTOUT. |
| 54 | PB15 | bidirectional | 5 V tolerant I/O (5VT) with default function PB15, alternate functions RTC_REFIN, TIMER0_CH2_ON, TIMER7_CH2_ON, SPI1_MOSI, I2S1_SD, TIMER11_CH1, USBHS_DP, EVENTOUT. |
| 55 | PD8 | bidirectional | 5 V tolerant I/O (5VT) with default function PD8, alternate functions USART2_TX, EXMC_D13, EVENTOUT. |
| 56 | PD9 | bidirectional | 5 V tolerant I/O (5VT) with default function PD9, alternate functions USART2_RX, EXMC_D14, EVENTOUT. |
| 57 | PD10 | bidirectional | 5 V tolerant I/O (5VT) with default function PD10, alternate functions USART2_CK, EXMC_D15, EVENTOUT. |
| 58 | PD11 | bidirectional | 5 V tolerant I/O (5VT) with default function PD11, alternate functions USART2_CTS, EXMC_A16, EVENTOUT. |
| 59 | PD12 | bidirectional | 5 V tolerant I/O (5VT) with default function PD12, alternate functions TIMER3_CH0, USART2_RTS, EXMC_A17, EVENTOUT. |
| 60 | PD13 | bidirectional | 5 V tolerant I/O (5VT) with default function PD13, alternate functions TIMER3_CH1, EXMC_A18, EVENTOUT. |
| 61 | PD14 | bidirectional | 5 V tolerant I/O (5VT) with default function PD14, alternate functions TIMER3_CH2, EXMC_D0, EVENTOUT. |
| 62 | PD15 | bidirectional | 5 V tolerant I/O (5VT) with default function PD15, alternate functions TIMER3_CH3, EXMC_D1, CTC_SYNC, EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V tolerant I/O (5VT) with default function PC6, alternate functions TIMER2_CH0, TIMER7_CH0, I2S1_MCK, USART5_TX, SDIO_D6, DCI_D0, EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V tolerant I/O (5VT) with default function PC7, alternate functions TIMER2_CH1, TIMER7_CH1, SPI1_SCK, I2S1_CK, I2S2_MCK, USART5_RX, SDIO_D7, DCI_D1, EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V tolerant I/O (5VT) with default function PC8, alternate functions TRACED0, TIMER2_CH2, TIMER7_CH2, USART5_CK, SDIO_D0, DCI_D2, EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V tolerant I/O (5VT) with default function PC9, alternate functions CK_OUT1, TIMER2_CH3, TIMER7_CH3, I2C2_SDA, I2S_CKIN, SDIO_D1, DCI_D3, EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V tolerant I/O (5VT) with default function PA8, alternate functions CK_OUT0, TIMER0_CH0, I2C2_SCL, USART0_CK, CTC_SYNC, USBFS_SOF, SDIO_D1, EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V tolerant I/O (5VT) with default function PA9, alternate functions TIMER0_CH1, I2C2_SMBA, SPI1_SCK, I2S1_CK, USART0_TX, SDIO_D2, DCI_D0, EVENTOUT and additional function USBFS_VBUS. |
| 69 | PA10 | bidirectional | 5 V tolerant I/O (5VT) with default function PA10, alternate functions TIMER0_CH2, USART0_RX, USBFS_ID, DCI_D1, EVENTOUT, I2C2_TXFRAME. |
| 70 | PA11 | bidirectional | 5 V tolerant I/O (5VT) with default function PA11, alternate functions TIMER0_CH3, USART0_CTS, USART5_TX, CAN0_RX, USBFS_DM, EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V tolerant I/O (5VT) with default function PA12, alternate functions TIMER0_ETI, USART0_RTS, USART5_RX, CAN0_TX, USBFS_DP, EVENTOUT. |
| 72 | PA13 | bidirectional | 5 V tolerant I/O (5VT) with default function JTMS, SWDIO and PA13, alternate function EVENTOUT. |
| 73 | NC | unconnected | Pin marked NC in the pin table with no function listed. |
| 74 | VSS | power_in | Ground pin (default function VSS). |
| 75 | VDD | power_in | Digital supply pin (default function VDD). |
| 76 | PA14 | bidirectional | 5 V tolerant I/O (5VT) with default function JTCK, SWCLK and PA14, alternate function EVENTOUT. |
| 77 | PA15 | bidirectional | 5 V tolerant I/O (5VT) with default function JTDI and PA15, alternate functions TIMER1_CH0, TIMER1_ETI, SPI0_NSS, SPI2_NSS, I2S2_WS, USART0_TX, EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V tolerant I/O (5VT) with default function PC10, alternate functions SPI2_SCK, I2S2_CK, USART2_TX, UART3_TX, SDIO_D2, DCI_D8, EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V tolerant I/O (5VT) with default function PC11, alternate functions I2S2_ADD_SD, SPI2_MISO, USART2_RX, UART3_RX, SDIO_D3, DCI_D4, EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V tolerant I/O (5VT) with default function PC12, alternate functions I2C1_SDA, SPI2_MOSI, I2S2_SD, USART2_CK, UART4_TX, SDIO_CK, DCI_D9, EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V tolerant I/O (5VT) with default function PD0, alternate functions SPI2_MOSI, I2S2_SD, CAN0_RX, EXMC_D2, EVENTOUT. |
| 82 | PD1 | bidirectional | 5 V tolerant I/O (5VT) with default function PD1, alternate functions SPI1_NSS, I2S1_WS, CAN0_TX, EXMC_D3, EVENTOUT. |
| 83 | PD2 | bidirectional | 5 V tolerant I/O (5VT) with default function PD2, alternate functions TIMER2_ETI, UART4_RX, SDIO_CMD, DCI_D11, EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V tolerant I/O (5VT) with default function PD3, alternate functions TRACED1, SPI1_SCK, I2S1_CK, USART1_CTS, EXMC_CLK, DCI_D5, EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V tolerant I/O (5VT) with default function PD4, alternate functions USART1_RTS, EXMC_NOE, EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V tolerant I/O (5VT) with default function PD5, alternate functions USART1_TX, EXMC_NWE, EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V tolerant I/O (5VT) with default function PD6, alternate functions SPI2_MOSI, I2S2_SD, USART1_RX, EXMC_NWAIT, DCI_D10, EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V tolerant I/O (5VT) with default function PD7, alternate functions USART1_CK, EXMC_NE0, EXMC_NCE1, EVENTOUT. |
| 89 | PB3 | bidirectional | 5 V tolerant I/O (5VT) with default function JTDO and PB3, alternate functions TRACESWO, TIMER1_CH1, SPI0_SCK, SPI2_SCK, I2S2_CK, USART0_RX, I2C1_SDA, EVENTOUT. |
| 90 | PB4 | bidirectional | 5 V tolerant I/O (5VT) with default function NJTRST and PB4, alternate functions TIMER2_CH0, SPI0_MISO, SPI2_MISO, I2S2_ADD_SD, I2C2_SDA, SDIO_D0, EVENTOUT and I2C0_TXFRAME. |
| 91 | PB5 | bidirectional | 5 V tolerant I/O (5VT) with default function PB5, alternate functions TIMER2_CH1, I2C0_SMBA, SPI0_MOSI, SPI2_MOSI, I2S2_SD, CAN1_RX, USBHS_ULPI_D7, ETH_PPS_OUT, EXMC_SDCKE1, DCI_D10, EVENTOUT. |
| 92 | PB6 | bidirectional | 5 V tolerant I/O (5VT) with default function PB6, alternate functions TIMER3_CH0, I2C0_SCL, USART0_TX, CAN1_TX, EXMC_SDNE1, DCI_D5, EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V tolerant I/O (5VT) with default function PB7, alternate functions TIMER3_CH1, I2C0_SDA, USART0_RX, EXMC_NL, DCI_VSYNC, EVENTOUT. |
| 94 | BOOT0 | bidirectional | 5 V tolerant I/O (5VT) with default function BOOT0. |
| 95 | PB8 | bidirectional | 5 V tolerant I/O (5VT) with default function PB8, alternate functions TIMER1_CH0, TIMER1_ETI, TIMER3_CH2, TIMER9_CH0, I2C0_SCL, CAN0_RX, ETH_MII_TXD3, SDIO_D4, DCI_D6, EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V tolerant I/O (5VT) with default function PB9, alternate functions TIMER1_CH1, TIMER3_CH3, TIMER10_CH0, I2C0_SDA, SPI1_NSS, I2S1_WS, CAN0_TX, SDIO_D5, DCI_D7, EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V tolerant I/O (5VT) with default function PE0, alternate functions TIMER3_ETI, EXMC_NBL0, DCI_D2, EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V tolerant I/O (5VT) with default function PE1, alternate functions TIMER0_CH1_ON, EXMC_NBL1, DCI_D3, EVENTOUT. |
| 99 | VSS | power_in | Ground pin (default function VSS). |
| 100 | VDD | power_in | Digital supply pin (default function VDD). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External voltage range (VDD), absolute max | VDD | -0.3 | 3.6 | V | Printed as VSS - 0.3 to VSS + 3.6 (VSS reference) | 52 | |
| External analog supply voltage (VDDA), absolute max | VDDA | -0.3 | 3.6 | V | Printed as VSSA - 0.3 to VSSA + 3.6 (VSSA reference) | 52 | |
| External battery supply voltage (VBAT), absolute max | VBAT | -0.3 | 3.6 | V | Printed as VSS - 0.3 to VSS + 3.6 (VSS reference) | 52 | |
| Input voltage on 5V tolerant pin, absolute max | VIN | -0.3 | V | Min printed as VSS - 0.3; max printed as VDD + 4.0 V (VDD-relative, not converted) | 52 | ||
| Input voltage on other I/O, absolute max | VIN | -0.3 | 4 | V | Min printed as VSS - 0.3 (VSS reference) | 52 | |
| Maximum current for GPIO pins | IIO | 25 | mA | 52 | |||
| Operating temperature range | TA | -40 | 85 | °C | 52 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 52 | ||
| Maximum junction temperature | TJ | 125 | °C | 52 | |||
| Supply voltage | VDD | 2.6 | 3.3 | 3.6 | V | 52 | |
| Analog supply voltage | VDDA | 2.6 | 3.3 | 3.6 | V | Same as VDD | 52 |
| Battery supply voltage | VBAT | 1.8 | 3.6 | V | 52 | ||
| Power on reset threshold | VPOR | 2.3 | 2.4 | 2.48 | V | 54 | |
| Power down reset threshold | VPDR | 1.72 | 1.8 | 1.88 | V | 54 | |
| Electrostatic discharge voltage (human body model) | VESD(HBM) | 7000 | V | TA=25 °C; JESD22-A114 | 55 | ||
| Electrostatic discharge voltage (charge device model) | VESD(CDM) | 800 | V | TA=25 °C; JESD22-C101 | 55 | ||
| Static latch-up, I-test | LU I-test | -200 | 200 | mA | TA=25 °C; JESD78 | 55 | |
| High speed external oscillator (HXTAL) frequency | fHXTAL | 4 | 8 | 32 | MHz | VDD=5.0V | 56 |
| Recommended load capacitance on OSC_IN and OSC_OUT | CHXTAL | 20 | 30 | pF | 56 | ||
| HXTAL oscillator duty cycle | DHXTAL | 30 | 50 | 70 | % | 56 | |
| Recommended load capacitance on OSC32_IN and OSC32_OUT | CLXTAL | 15 | pF | 56 | |||
| IRC16M oscillator frequency accuracy, factory-trimmed | ACCIRC16M | -4 | 5 | % | VDD=3.3V, TA=-40°C ~+105°C | 57 | |
| IRC16M oscillator frequency accuracy, factory-trimmed | ACCIRC16M | -2 | 2 | % | VDD=3.3V, TA=0°C ~ +85°C | 57 | |
| IRC16M oscillator frequency accuracy, factory-trimmed | ACCIRC16M | -1 | 1 | % | VDD=3.3V, TA=25°C | 57 | |
| IRC48M oscillator frequency accuracy, factory-trimmed | ACCIRC48M | -4 | 5 | % | VDD=3.3V, TA=-40°C ~+105°C | 57 | |
| IRC48M oscillator frequency accuracy, factory-trimmed | ACCIRC48M | -3 | 3 | % | VDD=3.3V, TA=0°C ~ +85°C | 57 | |
| IRC48M oscillator frequency accuracy, factory-trimmed | ACCIRC48M | -2 | 2 | % | VDD=3.3V, TA=25°C | 57 | |
| Low speed internal oscillator (IRC32K) frequency | fIRC32K | 20 | 32 | 45 | KHz | VDD=VBAT=3.3V, TA=-40°C ~ +85°C | 58 |
| PLL input clock frequency | fPLLIN | 1 | 4 | MHz | 58 | ||
| PLL output clock frequency | fPLL | 100 | 500 | MHz | 58 | ||
| Number of guaranteed program/erase cycles (endurance) | PECYC | 100 | kcycles | TA=-40°C ~ +85°C | 59 | ||
| Data retention time | tRET | 20 | years | TA=125°C | 59 | ||
| Word programming time | tPROG | 200 | 400 | us | TA=-40°C ~ +85°C | 59 | |
| Page erase time | tERASE | 60 | 100 | 450 | ms | TA=-40°C ~ +85°C | 59 |
| Standard IO low level input voltage | VIL | 1.27 | V | VDD=2.6V | 60 | ||
| Standard IO low level input voltage | VIL | 1.58 | V | VDD=3.3V | 60 | ||
| Standard IO low level input voltage | VIL | 1.71 | V | VDD=3.6V | 60 | ||
| High voltage tolerant IO low level input voltage | VIL | 1.27 | V | VDD=2.6V | 60 | ||
| High voltage tolerant IO low level input voltage | VIL | 1.58 | V | VDD=3.3V | 60 | ||
| High voltage tolerant IO low level input voltage | VIL | 1.71 | V | VDD=3.6V | 60 | ||
| Standard IO high level input voltage | VIH | 1.4 | V | VDD=2.6V | 60 | ||
| Standard IO high level input voltage | VIH | 1.71 | V | VDD=3.3V | 60 | ||
| Standard IO high level input voltage | VIH | 1.84 | V | VDD=3.6V | 60 | ||
| High voltage tolerant IO high level input voltage | VIH | 1.4 | V | VDD=2.6V | 60 | ||
| High voltage tolerant IO high level input voltage | VIH | 1.71 | V | VDD=3.3V | 60 | ||
| High voltage tolerant IO high level input voltage | VIH | 1.84 | V | VDD=3.6V | 60 | ||
| Low level output voltage | VOL | 0.17 | V | VDD=2.6V, IIO=8mA | 60 | ||
| Low level output voltage | VOL | 0.16 | V | VDD=3.3V, IIO=8mA | 60 | ||
| Low level output voltage | VOL | 0.46 | V | VDD=2.6V, IIO=20mA | 60 | ||
| Low level output voltage | VOL | 0.4 | V | VDD=3.3V, IIO=20mA | 60 | ||
| High level output voltage | VOH | 2.39 | V | VDD=2.6V, IIO=8mA | 60 | ||
| High level output voltage | VOH | 3.12 | V | VDD=3.3V, IIO=8mA | 60 | ||
| High level output voltage | VOH | 3.41 | V | VDD=3.6V, IIO=8mA | 60 | ||
| High level output voltage | VOH | 2.05 | V | VDD=2.6V, IIO=20mA | 60 | ||
| High level output voltage | VOH | 2.84 | V | VDD=3.3V, IIO=20mA | 60 | ||
| Internal pull-up resistor | RPU | 30 | 40 | 50 | kΩ | VIN=VSS | 60 |
| Internal pull-down resistor | RPD | 30 | 40 | 50 | kΩ | VIN=VDD | 60 |
CAD (KiCad official)
- Symbol:
GD32F407VGT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
gd32f407vgt6-etched.step/gd32f407vgt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd32f407vgt6.step/gd32f407vgt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (69 pp, sha256
f9e3141e7ec84256, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).