board
Network cabinet fan controller
Public Unreviewedby matt
Two independently controlled 12 V fans, Ethernet and Wi-Fi, and an RGB speed display in a custom printed puck. Routed development preview, not approved for manufacture.
main
matt
Add MTA-156 input revision and document enclosure and cable-fit limits
16485bb
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139
{
"board": "/home/adom/project/fan-controller/revisions/mta156/aiflow/board-10.kicad_pcb",
"boardSha256": "dcc6fad455a44aaf6a52e267782755cb2d6e50b06dd3d2b0a617c820d63a3b22",
"bom": {
"dnp": 0,
"fitted": 40,
"lines": 25,
"refs": 40
},
"bomSource": "the board's footprints (Value, footprint, MPN and Manufacturer properties, DNP and exclude-from-BOM attributes)",
"cpl": {
"bottomRotationsNotChecked": 0,
"refs": 40,
"topRotationsChecked": 40
},
"dir": "/home/adom/project/fan-controller/revisions/mta156/manufacturing",
"drill": {
"files": 2,
"hits": 114,
"platedHits": 108,
"platedPadHoles": 19,
"unplatedHits": 6,
"unplatedPadHoles": 6,
"vias": 89
},
"files": [
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-B_Cu.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-B_Mask.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-B_Paste.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-B_Silkscreen.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-Edge_Cuts.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-F_Cu.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-F_Mask.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-F_Paste.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-F_Silkscreen.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-In1_Cu.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-In2_Cu.gbr",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-NPTH.drl",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/gerbers/board-10-PTH.drl",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/board-10-cpl.csv",
"/home/adom/project/fan-controller/revisions/mta156/manufacturing/board-10-bom.csv"
],
"fillsGerbers": {
"layersWithPours": {
"B.Cu": {
"gerber": "board-10-B_Cu.gbr",
"regions": 2
},
"F.Cu": {
"gerber": "board-10-F_Cu.gbr",
"regions": 6
},
"In1.Cu": {
"gerber": "board-10-In1_Cu.gbr",
"regions": 1
},
"In2.Cu": {
"gerber": "board-10-In2_Cu.gbr",
"regions": 1
}
},
"pass": true
},
"fillsSaved": {
"filled": 4,
"filledLayers": [
"F.Cu",
"B.Cu",
"In1.Cu",
"In2.Cu"
],
"pass": true,
"shouldFill": 4,
"zones": [
{
"filledPolygons": {
"F.Cu": 6
},
"layers": [
"F.Cu"
],
"outlineMm2": 3493.25,
"zone": "zone \"GND F.Cu\" (GND)"
},
{
"filledPolygons": {
"B.Cu": 2
},
"layers": [
"B.Cu"
],
"outlineMm2": 3493.25,
"zone": "zone \"GND B.Cu\" (GND)"
},
{
"filledPolygons": {
"In1.Cu": 1
},
"layers": [
"In1.Cu"
],
"outlineMm2": 3493.25,
"zone": "zone on GND"
},
{
"filledPolygons": {
"In2.Cu": 1
},
"layers": [
"In2.Cu"
],
"outlineMm2": 3493.25,
"zone": "zone on GND"
}
]
},
"gerbers": {
"boardCopperLayers": 4,
"copperLayers": 4,
"files": 11,
"functions": [
"Copper,L4,Bot",
"Soldermask,Bot",
"Paste,Bot",
"Legend,Bot",
"Profile,NP",
"Copper,L1,Top",
"Soldermask,Top",
"Paste,Top",
"Legend,Top",
"Copper,L2,Inr",
"Copper,L3,Inr"
]
},
"kicadCli": "/home/adom/.local/bin/adom-aiflow-kicad-cli-remote",
"notes": [],
"pass": true,
"problems": []
}