board
Network cabinet fan controller
Public Unreviewedby matt
Two independently controlled 12 V fans, Ethernet and Wi-Fi, and an RGB speed display in a custom printed puck. Routed development preview, not approved for manufacture.
main
matt
Add MTA-156 input revision and document enclosure and cable-fit limits
16485bb
Fan-controller Rev A / MTA-156 revision — DEVELOPMENT EXPORTS
Not released for fabrication. Review the exact fan voltage/current, mated connector stack, carrier tolerances, power/fault behavior and thermal conditions first. JLCPCB must confirm four layers with 2 oz copper on all four layers and the proposed 1.6 mm stackup.
fan-controller-gerbers.zip: native copper, mask, paste, silk, outline and drill exports.fan-controller-jlc-bom.csv: 24 purchased MPN groups / 40 populated board positions, with LCSC IDs from the dated sourcing record.fan-controller-jlc-cpl.csv: the same 40 positions, in native KiCad coordinates and top-side rotation convention. Preview every part against JLC's library models; catalogue rotation offsets are not established by a CSV format conversion.board-10-bom.csvandboard-10-cpl.csv: checked native source exports. Test points, mounting holes and the unpopulated J5 are excluded.
J1–J4 are through-hole connectors. Confirm JLC's available assembly process or fit them manually; a position-file row is not a promise of automated assembly. No order has been submitted.
# Fan-controller Rev A / MTA-156 revision — DEVELOPMENT EXPORTS
Not released for fabrication. Review the exact fan voltage/current, mated connector stack, carrier tolerances, power/fault behavior and thermal conditions first. JLCPCB must confirm four layers with 2 oz copper on all four layers and the proposed 1.6 mm stackup.
- `fan-controller-gerbers.zip`: native copper, mask, paste, silk, outline and drill exports.
- `fan-controller-jlc-bom.csv`: 24 purchased MPN groups / 40 populated board positions, with LCSC IDs from the dated sourcing record.
- `fan-controller-jlc-cpl.csv`: the same 40 positions, in native KiCad coordinates and top-side rotation convention. Preview every part against JLC's library models; catalogue rotation offsets are not established by a CSV format conversion.
- `board-10-bom.csv` and `board-10-cpl.csv`: checked native source exports. Test points, mounting holes and the unpopulated J5 are excluded.
J1–J4 are through-hole connectors. Confirm JLC's available assembly process or fit them manually; a position-file row is not a promise of automated assembly. No order has been submitted.