board

Network cabinet fan controller

Public Unreviewed

by matt

Two independently controlled 12 V fans, Ethernet and Wi-Fi, and an RGB speed display in a custom printed puck. Routed development preview, not approved for manufacture.

pcbfan-controlleresphomeesp32-s3ethernetnetwork-cabinet
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
fan-controller / revisions / mta156 / docs / fan-model-confirmation.json
HistoryDownload
matt Add MTA-156 input revision and document enclosure and cable-fit limits 16485bb
123456789101112131415161718192021222324252627
{
  "model": "ARCTIC P14 Max",
  "quantity": 2,
  "source": "https://www.arctic.de/media/8a/18/01/1710507321/Spec_Sheet_P14_Max_EN.pdf",
  "verified_specifications": {
    "voltage_V": 12,
    "listed_current_A_each": 0.35,
    "listed_current_A_pair": 0.7,
    "speed_RPM": [
      400,
      2800
    ],
    "stop_below_PWM_percent": 3,
    "connector": "4-pin PWM: 1 GND, 2 +12V, 3 tach, 4 PWM",
    "operating_ambient_C": [
      0,
      40
    ]
  },
  "assessment": "Listed running load fits the unchanged 1 A/channel design allowance. No PCB, BOM, Gerber or firmware logic change.",
  "remaining": [
    "Startup/stall current and fuse coordination",
    "Actual plugged-in connector height and cable clearance",
    "Tach pulses per revolution (firmware assumes two)",
    "Reset/unpowered PWM behavior and physical thermal/fault qualification"
  ]
}