Network cabinet fan controller

[
  {
    "title": "Built around the cabinet",
    "text": "A compact fan controller, designed around its cabinet: wired networking, independent fan control, and a visible speed display inside one serviceable puck.",
    "view": "assembled"
  },
  {
    "title": "A threaded reveal",
    "text": "The outer cap follows a coarse printed thread, opening to reveal the circuit board and the display assembly beneath it.",
    "view": "opening"
  },
  {
    "title": "Inside the display",
    "text": "This exploded view separates the bezel and light pipes to explain their construction; the actual bezel is secured by fasteners from below.",
    "view": "exploded"
  },
  {
    "title": "From LED to visible dot",
    "text": "Each light pipe carries light from its board mounted LED to a dot on the face, with ten speed positions and a separate status position.",
    "view": "pipes"
  },
  {
    "title": "A display with room to grow",
    "text": "The LEDs are RGB devices, driven by a dedicated thirty six channel controller, so the hardware supports more than a single indicator color.",
    "view": "leds"
  },
  {
    "title": "The control and network chips",
    "text": "An ESP thirty two S three runs the control firmware, while a W five thousand five hundred provides the wired Ethernet connection.",
    "view": "chips"
  },
  {
    "title": "Commands and feedback",
    "text": "Each fan has its own speed command and RPM feedback, allowing the firmware to compare what it requests with what the fan actually does.",
    "view": "board"
  },
  {
    "title": "Designed for the harness",
    "text": "Labeled M T A one hundred headers support custom cable lengths, with connector positions coordinated with the puck and its wire entry openings.",
    "view": "connectors"
  },
  {
    "title": "Power and service",
    "text": "Twelve volts powers the fans, while U S B C provides programming and service power for the electronics; U S B does not power the fans.",
    "view": "power"
  },
  {
    "title": "Local control, connected monitoring",
    "text": "The firmware prioritizes Ethernet with Wi-Fi fallback, bringing local temperature based control and network monitoring together in the same device.",
    "view": "board"
  },
  {
    "title": "An honest development snapshot",
    "text": "This is a routed development design: physical testing is still ahead, and improved air temperature sensing is under evaluation.",
    "view": "thermal"
  },
  {
    "title": "Explore every layer",
    "text": "Explore the assembly, inspect the components, and follow the design from the circuit board to the finished puck.",
    "view": "closing"
  }
]