by John Lauer
A two-channel optical displacement instrument with a current-controlled rear laser diode, two photodiode front ends, and a Raspberry Pi Pico digitizer.
← Commit history
Optical setup: product link for the cover glass, simpler Laserland link, drop a dead datasheet link
1 file changed
+3−3
docs/optical-setup.md+3−3@@ -25,9 +25,9 @@ The undervoltage supervisor inhibits the current driver during startup and shutd | Second single-longitudinal-mode candidate | [Blue Sky Research VPSL-0685-050-X-5-A/B datasheet](https://shop.amstechnologies.com/media/df/bf/3b/1720716426/VPSL-Laser-Diodes-685-980-nm-Blue-Sky-Research-Datasheets.pdf?ts=1724508703) | Manufacturer specifies a 5.6 mm can with monitor photodiode, 685 nm, 75 mA typical and 120 mA maximum operating current for 50 mW at 25 °C. The A and B packages have different pin assignments. The supplier lists the series as [quote to order](https://shop.amstechnologies.com/VPSL-Virtual-Point-Source-Laser-Diodes/SW10950). Confirm the exact variant, stock and dropout headroom before committing. | | Alternate laser candidate | [Thorlabs L658P040](https://www.thorlabs.com/item/L658P040) | 658 nm, 75 mA typical and 110 mA maximum operating current at 40 mW. Thorlabs catalog V21 calls it single-longitudinal-mode. A later Thorlabs catalog establishes transverse mode only, so confirm the longitudinal spec with the supplier. The [stockist lists it in stock](https://www.meetoptics.com/light-sources/laser-components-and-parts/laser-diodes/free-space-single-transverse-mode-laser-diode/s/thorlabs/p/L658P040). | | Multimode trial candidate | [TULINOPTO TL-650-A05230](https://www.tulinopto.com/products/TO56.html) | Maker lists 650 nm, 5 mW, 17 mA and mode MM in a TO-56 package. Request pricing and confirm the monitor diode, pinout and longitudinal spectrum with the vendor before use. |-| Documented longitudinal-multimode trial diode | [Sony SLD1138VL manufacturer datasheet](https://datasheet4u.com/pdf-down/S/L/D/SLD1138VL_SonyCorporation.pdf) | Legacy 650 nm, 5.6 mm DVD diode with a monitor photodiode. Sony specifies 50 mA typical at 4 mW and a 5 mW optical maximum. Suitable for a surplus experiment when an identifiable diode is available. No current stock was verified. |+| Documented longitudinal-multimode trial diode | Sony SLD1138VL (search the part number for Sony's datasheet) | Legacy 650 nm, 5.6 mm DVD diode with a monitor photodiode. Sony specifies 50 mA typical at 4 mW and a 5 mW optical maximum. Suitable for a surplus experiment when an identifiable diode is available. No current stock was verified. | | Low-cost laser candidate | [Thorlabs L650P007](https://www.thorlabs.com/item/L650P007) | 650 nm, 7 mW, 28 mA typical, 35 mA maximum listed operating current, 5.6 mm with monitor diode. The catalog specifies transverse mode only. Longitudinal behavior remains unqualified. |-| Low-cost starter diode with monitor | [Arima ADL-65052TL manufacturer data](https://www.arimalasers.com/en/product/detail/15), [Laserland stock listing](https://laserland.com/product-category/laser-diodes/650nm-laser-diode/?product_count=24&product_orderby=name) | Laserland lists five for $7.98. Arima specifies 20 mA typical and 22 mA maximum operating current at 5 mW and a 7 mW absolute optical rating. The maker specifies a single lateral mode. Treat its longitudinal spectrum as unqualified and verify the lead map, current and optical power before use. |+| Low-cost starter diode with monitor | [Arima ADL-65052TL manufacturer data](https://www.arimalasers.com/en/product/detail/15), [Laserland stock listing](https://laserland.com/product-category/laser-diodes/650nm-laser-diode/) | Laserland lists five for $7.98. Arima specifies 20 mA typical and 22 mA maximum operating current at 5 mW and a 7 mW absolute optical rating. The maker specifies a single lateral mode. Treat its longitudinal spectrum as unqualified and verify the lead map, current and optical power before use. | | Collimation | [Thorlabs C220TMD-A](https://www.thorlabs.com/item/C220TMD-A), [S05TM09](https://www.thorlabs.com/item/S05TM09), [SM05L05](https://www.thorlabs.com/item/SM05L05) | Asphere with an M9 × 0.5 cell, SM05 adapter and short tube. The [insulating slide collar](collimator-bracket.stl) mounts to the board's two Ø2.2 mm holes on 16 mm centers. Use black PETG or nylon, two M2 fasteners with blind heat-set inserts, and a nylon M2.5 radial set screw in the collar. Measure the tube diameter and confirm free sliding fit before focusing. [Editable bracket model](collimator-bracket.step) | | Return target | [Thorlabs PS975](https://www.thorlabs.com/item/PS975) or [PF05-03-P01](https://www.thorlabs.com/item/PF05-03-P01) | Corner cube for easier return alignment. A mirror needs tip and tilt adjustment. | | Attenuator | [Thorlabs NE10A](https://www.thorlabs.com/item/NE10A) | Start with attenuated feedback. |@@ -35,7 +35,7 @@ The undervoltage supervisor inhibits the current driver during startup and shutd | Digitizer | [Raspberry Pi Pico SC0915](https://pip.raspberrypi.com/categories/610) | Fit two [Harwin M20-7822046](https://www.harwin.com/products/M20-7822046) 20-position 2.54 mm sockets and two [Harwin M20-9992046](https://www.harwin.com/products/M20-9992046) matching male headers onto the Pico. | | Bench supply | [RIGOL DP832](https://www.rigolna.com/products/dc-power-loads/dp800/dp832/) | One channel at 12 V with current limiting. | | Adjustable slit | [Two Stanley 28-510 single-edge blades](https://www.stanleytools.com/en-us/product/28-510/glass-scraper-blade-10-pack) | Clamp the backs independently in an insulated holder with the two straight edges facing. Use a micrometer or opposed adjustments to set the opening. |-| Beam pickoff glass | [Thorlabs CG15CH2](https://www.thorlabs.com/_reachCert.cfm?partnumber=CG15CH2) | 22 × 22 mm #1.5H cover glass, held at an angle to direct a weak reflection to the slit. |+| Beam pickoff glass | [Thorlabs CG15CH2](https://www.thorlabs.com/item/CG15CH2) | 22 × 22 mm #1.5H cover glass, held at an angle to direct a weak reflection to the slit. | | Manual travel | [Thorlabs MT1](https://www.thorlabs.com/item/MT1) | Move the return target along the beam axis. | | Motorized travel | [Thorlabs NRT150 stage family](https://www.thorlabs.com/images/Catalog/V21/V21_2_MotionControl.pdf) | Vendor catalog lists 150 mm travel and 10 mm/s maximum. Confirm the controller and trigger wiring for the exact version. |