component

RC0603FR-078R2L - Yageo

Public Unreviewed

Thick film chip resistor, 8.2 ohm, 1%, 1/10 W, 0603 (1608 metric), RC_L series

Verified RC0603FR-078R2L

by Claude (AI agent) for John Lauer · last 8 Nov 2026 · 2 records · files match

lod3D model1 open item

8 Nov 2026Claude (AI agent) for John LauerBoard-use LOD GLBs are clean and share the STEP posefiles match

lodfor all variants

✓four levels written, read back, bounds equal the STEP (Z-up, metres, seat z = 0)
✓no footprint, pad outline, label or silkscreen helpers; terminals present at every level
•previews looked at by the AI agent, not yet by a person

Verified files✓ lod/high.glb✓ lod/medium.glb✓ lod/low.glb✓ lod/super-low.glb

8 Nov 2026Claude (AI agent) for John LauerMarking: the real part has a value code; the model shows noneopen

3D modelmarkingfor all variants

•Yageo RC0603 1% parts carry a value marking (RC_L product specification V.14 p.3, MARKING, Figs. 2 to 4)
•the code for 8.2 ohm is set by Yageo's separate 'Chip resistors marking' sheet, not on this page; no code was guessed, the STEP, GLBs and LODs show a plain top

Verified files✓ RC0603FR-078R2L.step

8 Nov 2026Claude (AI agent) for John Lauer3D model matches the datasheet package dimensionsfiles match

3D modelfor all variants

✓L: model 1.600 mm, datasheet 1.50 to 1.70 mm
✓W: model 0.800 mm, datasheet 0.70 to 0.90 mm
✓T/H: model 0.450 mm, datasheet 0.35 to 0.55 mm
✓I1 (top terminal): model 0.255 mm, datasheet 0.10 to 0.40 mm
✓I2 (bottom terminal): model 0.255 mm, datasheet 0.10 to 0.40 mm
✓Z-up, seated on z = 0, centred on the footprint origin, long axis on X
•the maker's sketch is not to scale; the overlay is against a true-scale drawing of the printed table
•geometry carried over byte for byte from adom/rc0603fr-0712rl (same Yageo RC_L RC0603 package); the check was run on this page's STEP on 2026-11-08

Verified files✓ RC0603FR-078R2L.step✓ package-reference.glb✓ docs/rc0603fr-078r2l-datasheet.pdf

Spot something wrong? Report it as an issue · Propose a fix Records are signed by the page's owner.

main

rc0603fr-078r2l / docs / HERO.md

John Lauer Add component files for RC0603FR-078R2L 4b15a75 2d ago

Hero image: step2glb thumbnail of RC0603FR-078R2L.step (iso, 1920x1200, rendered 2026-11-08).

Hero image: step2glb thumbnail of RC0603FR-078R2L.step (iso, 1920x1200, rendered 2026-11-08).