# AI Flow run: claude-opus-5-5 on board-0

**Finished** (board design checks, no open items) at 2026-11-07T03:42:33Z, 526.0 min of AI time from the prompt; the video is being cut. A human review still comes before fabrication.

Prompt at 2026-11-06T14:34:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out.

## Sessions

One row per human prompt: the AI's time on it, unobserved gaps excluded by the heuristic, which may include external AI work.

| Session | Prompt at | Done at | AI time min | Unobserved gap min | What |
|---|---|---|---|---|---|
| 1 | 2026-11-06T14:34:00Z | (open) | 526.0 | 263 | the first prompt |
| **all** | | | **526.0** | | |

## Per step

AI time only, the idle cut out.

| Step | AI min | AI thinking min | Tool min | Turns | Visits | Returns | Longest think |
|---|---|---|---|---|---|---|---|
| intake | 2.9 | 2.9 | 0.0 | 1 | 1 | 0 | 2.8 min |
| placement | 58.6 | 0.0 | 58.6 | 31 | 2 | 1 | 0.0 min |
| routing | 33.0 | 0.0 | 33.0 | 18 | 2 | 0 | 0.0 min |
| pours | 2.7 | 0.0 | 2.7 | 6 | 1 | 0 | 0.0 min |
| current | 12.6 | 0.0 | 12.6 | 52 | 1 | 0 | 0.0 min |
| thermal | 0.4 | 0.0 | 0.4 | 5 | 1 | 0 | 0.0 min |
| finish | 120.8 | 0.0 | 120.8 | 12 | 3 | 0 | 0.0 min |
| 3d | 10.1 | 0.0 | 10.1 | 6 | 1 | 0 | 0.0 min |
| components | 6.5 | 0.0 | 6.5 | 11 | 2 | 1 | 0.0 min |
| design | 218.1 | 0.0 | 218.1 | 4 | 1 | 0 | 0.0 min |
| export | 4.0 | 0.0 | 4.0 | 19 | 3 | 0 | 0.0 min |
| fields | 25.8 | 0.0 | 25.8 | 3 | 1 | 0 | 0.0 min |
| library | 3.0 | 0.0 | 3.0 | 2 | 1 | 0 | 0.0 min |
| models | 2.1 | 0.0 | 2.1 | 8 | 1 | 0 | 0.0 min |
| nets | 0.8 | 0.0 | 0.8 | 2 | 1 | 0 | 0.0 min |
| outline | 4.4 | 0.0 | 4.4 | 2 | 1 | 0 | 0.0 min |
| parts | 3.5 | 0.0 | 3.5 | 11 | 1 | 0 | 0.0 min |
| project-page | 1.9 | 0.0 | 1.9 | 12 | 2 | 1 | 0.0 min |
| rules | 0.4 | 0.3 | 0.1 | 4 | 1 | 0 | 0.3 min |
| silkscreen | 12.6 | 0.0 | 12.6 | 11 | 2 | 1 | 0.0 min |
| sourcing | 1.1 | 0.0 | 1.1 | 4 | 1 | 0 | 0.0 min |
| test-plan | 0.7 | 0.0 | 0.7 | 2 | 1 | 0 | 0.0 min |
| thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |
| **total** | **526.0** | **3.2** | **522.8** | | | | |

## Returns to earlier steps

- 2026-11-06T19:08:46Z back to **project-page** (visit 2): 
- 2026-11-06T19:40:45Z back to **placement** (visit 2): U1 needs the ATtiny1616's own wiki footprint: KiCad 10's VQFN-20 uses custom-shape pads the grid router cannot see, so all 19 U1 connections had no path
- 2026-11-07T03:17:15Z back to **silkscreen** (visit 2): 
- 2026-11-07T03:32:05Z back to **components** (visit 2): 

## Decisions along the way

- 2026-11-06T14:36:57Z clip-start:rules-1
- 2026-11-06T15:00:09Z clip guard: the rules clip ran 23 min, past its 10 min budget twice over; stopped by the guard
- 2026-11-06T15:00:26Z clip-start:design-1
- 2026-11-06T15:01:12Z clip-start:test-plan-1
- 2026-11-06T15:02:32Z clip-start:sourcing-1
- 2026-11-06T15:06:10Z clip-start:parts-1
- 2026-11-06T15:26:29Z clip guard: the parts clip ran 20 min, past its 10 min budget twice over; stopped by the guard
- 2026-11-06T15:27:24Z clip-start:project-page-1
- 2026-11-06T15:43:26Z clip-start:components-1
- 2026-11-06T19:08:18Z clip guard: the components clip ran 204 min, past its 10 min budget twice over; stopped by the guard
- 2026-11-06T19:08:48Z clip-start:project-page-2
- 2026-11-06T19:13:56Z clip-start:library-1
- 2026-11-06T19:15:40Z clip-start:models-1
- 2026-11-06T19:21:46Z clip-start:placement-1
- 2026-11-06T19:34:51Z clip-start:routing-1
- 2026-11-06T19:48:27Z clip-start:placement-2
- 2026-11-06T21:12:55Z clip guard: the placement clip ran 84 min, past its 40 min budget twice over; stopped by the guard
- 2026-11-06T21:13:23Z clip-start:routing-2
- 2026-11-06T22:29:23Z clip guard: the routing clip ran 76 min, past its 30 min budget twice over; stopped by the guard
- 2026-11-06T22:36:42Z clip-start:thermal-vias-1
- 2026-11-06T22:37:39Z clip-start:pours-1
- 2026-11-06T22:44:34Z clip-start:outline-1
- 2026-11-06T22:45:56Z clip-start:current-1
- 2026-11-06T23:05:34Z artifact analysis-image for current-1: Current density during the 0.62 A IR echo pulse (Adom Fields): VBAT feeds the three emitters from J2 and C15, GND returns through both pours; peak 44 A/mm2 on 0.4 mm VBAT copper, under the 60 A/mm2 screen
- 2026-11-06T23:05:37Z net GND: 408 items highlighted
- 2026-11-06T23:05:42Z net VBAT: 119 items highlighted
- 2026-11-06T23:25:54Z clip guard: the current clip ran 39 min, past its 10 min budget twice over; stopped by the guard
- 2026-11-06T23:25:57Z artifact analysis-image for thermal-1: Temperature rise while charging at 196 mA (Adom Fields, still air, 25 C ambient): the MCP73831 charger U2 dissipates 0.34 W into VBAT, VBUS and GND copper and peaks at +33 C, under its 45 C budget
- 2026-11-06T23:26:00Z net GND: 408 items highlighted
- 2026-11-06T23:26:05Z net VBUS: 30 items highlighted
- 2026-11-06T23:39:46Z clip-start:thermal-1
- 2026-11-06T23:39:57Z artifact analysis-image for thermal-1: Temperature rise while charging at 196 mA (Adom Fields, still air, 25 C ambient): the MCP73831 charger U2 dissipates 0.34 W into VBAT, VBUS and GND copper and peaks at +33 C, under its 45 C budget
- 2026-11-06T23:39:59Z net GND: 408 items highlighted
- 2026-11-06T23:40:04Z net VBUS: 30 items highlighted
- 2026-11-06T23:40:09Z net VBAT: 119 items highlighted
- 2026-11-07T00:06:46Z clip-start:nets-1
- 2026-11-07T00:06:55Z net GND: 408 items highlighted
- 2026-11-07T00:07:00Z net VBAT: 119 items highlighted
- 2026-11-07T00:07:05Z net VBUS: 30 items highlighted
- 2026-11-07T00:07:10Z net 3V3: 130 items highlighted
- 2026-11-07T00:07:15Z net IR940_D: 27 items highlighted
- 2026-11-07T00:07:20Z net IR850_D: 18 items highlighted
- 2026-11-07T00:07:25Z net RX_SIG: 38 items highlighted
- 2026-11-07T00:07:30Z net TIA_IN: 25 items highlighted
- 2026-11-07T00:10:25Z clip-start:silkscreen-1
- 2026-11-07T00:23:26Z clip-start:3d-1
- 2026-11-07T00:26:24Z clip-start:finish-1
- 2026-11-07T01:06:39Z clip guard: the finish clip ran 40 min, past its 10 min budget twice over; stopped by the guard
- 2026-11-07T02:58:53Z pulled 5 clip(s) that had not reached the run
- 2026-11-07T03:12:08Z clip-start:export-1
- 2026-11-07T03:24:25Z clip-start:silkscreen-2
- 2026-11-07T03:25:29Z clip-start:finish-2
- 2026-11-07T03:27:50Z clip-start:export-2
- 2026-11-07T03:38:06Z clip-start:components-2
- 2026-11-07T03:40:25Z clip-start:finish-3
- 2026-11-07T03:42:37Z clip-start:export-3

## Where the board stands

- routing: 0 unrouted after null passes
- gate: 0 new DRC errors, 0 unconnected, null inherited
- landed live: 0 of 0 route entries
- pours (landed): 0 groups, failed []
- copper kept (mm2 per layer): {"B.Cu":793.09,"F.Cu":651.51}
- analyze-current: pass
- analyze-thermal: pass

## The steps on camera

One clip per step visit, sped up 10x, with the editor at the start and the end of the visit. A caption above every clip and screenshot says what it shows.

### rules

What this step does: Choose the fab and load its design rules before anything is drawn: the AI asks the human which fab builds the board (3rdPartyFab by default, JLCPCB on request) and loads that fab's rule profile into the EDA (KiCad .kicad_dru, Fusion DRC rules), so every later step designs to the process that will build it.

**Clip: rules, the PCB editor from 2026-11-06T14:36:57Z to 2026-11-06T15:00:09Z. Motion only: 18.1 min of real time, 799 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/rules-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the rules clip, what the camera saw.**

![nine frames of rules](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/rules-1-sheet.png)

**Screenshot: the board when rules began.**

![the board when rules began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-rules-1-start.png)

**Screenshot: the board when rules ended.**

![the board when rules ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-rules-1-end.png)

### design

What this step does: 

**Clip: design, the PCB editor from 2026-11-06T15:00:26Z to 2026-11-06T15:00:38Z. Motion only: 0.2 min of real time, 8 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/design-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the design clip, what the camera saw.**

![nine frames of design](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/design-1-sheet.png)

**Screenshot: the board when design began.**

![the board when design began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-design-1-start.png)

**Screenshot: the board when design ended.**

![the board when design ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-design-1-end.png)

### test-plan

What this step does: Think through how this board will be tested once it is built and on the probing workcell: the measurements a careful engineer would take (rails, switch node, feedback, ripple, enable, LEDs), the net each one needs, and a probe spot for every one. The binary checks each planned measurement has a probe-able spot (a 0.5 mm round test point or an exposed pad the pogo tip can land on, within 50 mm of a ground machine contact, not under a part body) and adds a test point to the netlist for every gap.

**Clip: test-plan, the PCB editor from 2026-11-06T15:01:12Z to 2026-11-06T15:01:42Z. Motion only: 0.5 min of real time, 22 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/test-plan-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the test-plan clip, what the camera saw.**

![nine frames of test-plan](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/test-plan-1-sheet.png)

**Screenshot: the board when test-plan began.**

![the board when test-plan began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-test-plan-1-start.png)

**Screenshot: the board when test-plan ended.**

![the board when test-plan ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-test-plan-1-end.png)

### sourcing

What this step does: 

**Clip: sourcing, the PCB editor from 2026-11-06T15:02:32Z to 2026-11-06T15:04:28Z. Motion only: 1.9 min of real time, 84 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/sourcing-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the sourcing clip, what the camera saw.**

![nine frames of sourcing](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/sourcing-1-sheet.png)

**Screenshot: the board when sourcing began.**

![the board when sourcing began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-sourcing-1-start.png)

**Screenshot: the board when sourcing ended.**

![the board when sourcing ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-sourcing-1-end.png)

### parts

What this step does: The chosen parts on the Adom wiki: every BOM row with an MPN matched to its wiki component page (symbol, footprint, STEP); a missing page is made before going on. Each page is shown in a Hydrogen tab as it is confirmed, so the viewer sees the parts being picked.

**Clip: parts, the PCB editor from 2026-11-06T15:06:10Z to 2026-11-06T15:26:30Z. Motion only: 16.7 min of real time, 729 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/parts-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the parts clip, what the camera saw.**

![nine frames of parts](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/parts-1-sheet.png)

**Screenshot: the board when parts began.**

![the board when parts began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-parts-1-start.png)

**Screenshot: the board when parts ended.**

![the board when parts ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-parts-1-end.png)

### project-page

What this step does: Revision 1 of the board's project page before any EDA work: README (what the board is, its requirements) with the component table linking every part's wiki page, and a KiCad PCM repository of all the parts (an Adom Cloud Library exported and repackaged), so KiCad installs them in one go.

**Clip: project-page, the PCB editor from 2026-11-06T15:27:24Z to 2026-11-06T15:43:24Z. Motion only: 2.9 min of real time, 78 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/project-page-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the project-page clip, what the camera saw.**

![nine frames of project-page](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/project-page-1-sheet.png)

**Screenshot: the board when project-page began.**

![the board when project-page began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-project-page-1-start.png)

**Screenshot: the board when project-page ended.**

![the board when project-page ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-project-page-1-end.png)

### components

What this step does: Audit wiki component identity, reusable CAD quality and redistribution evidence before placement; offer cached optional MPN-marked variants.

**Clip: components, still recording (started 2026-11-06T15:43:26Z); it appears here when the step ends.**

**Screenshot: the board when components began.**

![the board when components began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-components-1-start.png)

### project-page, visit 2

What this step does: Revision 1 of the board's project page before any EDA work: README (what the board is, its requirements) with the component table linking every part's wiki page, and a KiCad PCM repository of all the parts (an Adom Cloud Library exported and repackaged), so KiCad installs them in one go.

**Clip: project-page, visit 2, the PCB editor from 2026-11-06T19:08:48Z to 2026-11-06T19:11:28Z. Motion only: 2.5 min of real time, 106 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/project-page-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the project-page, visit 2 clip, what the camera saw.**

![nine frames of project-page, visit 2](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/project-page-2-sheet.png)

**Screenshot: the board when project-page, visit 2 began.**

![the board when project-page, visit 2 began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-project-page-2-start.png)

**Screenshot: the board when project-page, visit 2 ended.**

![the board when project-page, visit 2 ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-project-page-2-end.png)

### library

What this step does: 

**Clip: library, the PCB editor from 2026-11-06T19:13:56Z to 2026-11-06T19:14:44Z. Motion only: 0.7 min of real time, 27 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/library-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the library clip, what the camera saw.**

![nine frames of library](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/library-1-sheet.png)

**Screenshot: the board when library began.**

![the board when library began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-library-1-start.png)

**Screenshot: the board when library ended.**

![the board when library ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-library-1-end.png)

### models

What this step does: Check native board model resolution and inspect the selected library variants in the chosen EDA; use the component register for unresolved assets.

**Clip: models, the PCB editor from 2026-11-06T19:15:40Z to 2026-11-06T19:18:52Z. Motion only: 3.0 min of real time, 128 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/models-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the models clip, what the camera saw.**

![nine frames of models](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/models-1-sheet.png)

**Screenshot: the board when models began.**

![the board when models began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-models-1-start.png)

**Screenshot: the board when models ended.**

![the board when models ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-models-1-end.png)

### placement

What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here

**Clip: placement, the PCB editor from 2026-11-06T19:21:45Z to 2026-11-06T19:29:12Z. Motion only: 7.0 min of real time, 246 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/placement-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the placement clip, what the camera saw.**

![nine frames of placement](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/placement-1-sheet.png)

**Screenshot: the board when placement began.**

![the board when placement began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-placement-1-start.png)

**Screenshot: the board when placement ended.**

![the board when placement ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-placement-1-end.png)

### routing

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, the PCB editor from 2026-11-06T19:34:51Z to 2026-11-06T19:41:34Z. Motion only: 5.9 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/routing-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing clip, what the camera saw.**

![nine frames of routing](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/routing-1-sheet.png)

**Screenshot: the board when routing began.**

![the board when routing began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-routing-1-start.png)

**Screenshot: the board when routing ended.**

![the board when routing ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-routing-1-end.png)

### placement, visit 2 (rework)

What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here

Why the AI came back here: U1 needs the ATtiny1616's own wiki footprint: KiCad 10's VQFN-20 uses custom-shape pads the grid router cannot see, so all 19 U1 connections had no path

**Clip: placement, visit 2 (rework), the PCB editor from 2026-11-06T19:48:27Z to 2026-11-06T21:12:55Z. Motion only: 5.6 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/placement-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the placement, visit 2 (rework) clip, what the camera saw.**

![nine frames of placement, visit 2 (rework)](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/placement-2-sheet.png)

**Screenshot: the board when placement, visit 2 (rework) began.**

![the board when placement, visit 2 (rework) began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-placement-2-start.png)

### routing, visit 2

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, visit 2, still recording (started 2026-11-06T21:13:23Z); it appears here when the step ends.**

**Screenshot: the board when routing, visit 2 began.**

![the board when routing, visit 2 began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-routing-2-start.png)

### thermal-vias

What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it.

**Clip: thermal-vias, the PCB editor from 2026-11-06T22:36:41Z to 2026-11-06T22:36:57Z. Motion only: 0.2 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/thermal-vias-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal-vias clip, what the camera saw.**

![nine frames of thermal-vias](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/thermal-vias-1-sheet.png)

**Screenshot: the board when thermal-vias began.**

![the board when thermal-vias began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-thermal-vias-1-start.png)

**Screenshot: the board when thermal-vias ended.**

![the board when thermal-vias ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-thermal-vias-1-end.png)

### pours

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, the PCB editor from 2026-11-06T22:37:39Z to 2026-11-06T22:40:55Z. Motion only: 2.7 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/pours-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours clip, what the camera saw.**

![nine frames of pours](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/pours-1-sheet.png)

**Screenshot: the board when pours began.**

![the board when pours began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-pours-1-start.png)

**Screenshot: the board when pours ended.**

![the board when pours ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-pours-1-end.png)

### outline

What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.

**Clip: outline, the PCB editor from 2026-11-06T22:44:34Z to 2026-11-06T22:45:01Z. Motion only: 0.3 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/outline-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the outline clip, what the camera saw.**

![nine frames of outline](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/outline-1-sheet.png)

**Screenshot: the board when outline began.**

![the board when outline began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-outline-1-start.png)

**Screenshot: the board when outline ended.**

![the board when outline ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-outline-1-end.png)

### current

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, the PCB editor from 2026-11-06T22:45:56Z to 2026-11-06T23:25:54Z. Motion only: 20.0 min of real time, 14 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/current-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current clip, what the camera saw.**

![nine frames of current](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/current-1-sheet.png)

**Screenshot: the board when current began.**

![the board when current began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-current-1-start.png)

**The AI's drawing: Current density during the 0.62 A IR echo pulse (Adom Fields): VBAT feeds the three emitters from J2 and C15, GND returns through both pours; peak 44 A/mm2 on 0.4 mm VBAT copper, under the 60 A/mm2 screen**

![Current density during the 0.62 A IR echo pulse (Adom Fields): VBAT feeds the three emitters from J2 and C15, GND returns through both pours; peak 44 A/mm2 on 0.4 mm VBAT copper, under the 60 A/mm2 screen](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/current-1-analysis-image-0.png)

### thermal

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, the PCB editor from 2026-11-06T23:39:46Z to 2026-11-06T23:40:57Z. Motion only: 0.7 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/thermal-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal clip, what the camera saw.**

![nine frames of thermal](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/thermal-1-sheet.png)

**Screenshot: the board when thermal began.**

![the board when thermal began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-thermal-1-start.png)

**Screenshot: the board when thermal ended.**

![the board when thermal ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-thermal-1-end.png)

**The AI's drawing: Temperature rise while charging at 196 mA (Adom Fields, still air, 25 C ambient): the MCP73831 charger U2 dissipates 0.34 W into VBAT, VBUS and GND copper and peaks at +33 C, under its 45 C budget**

![Temperature rise while charging at 196 mA (Adom Fields, still air, 25 C ambient): the MCP73831 charger U2 dissipates 0.34 W into VBAT, VBUS and GND copper and peaks at +33 C, under its 45 C budget](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/thermal-1-analysis-image-0.png)

### fields

What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera

**Clip: fields, the PCB editor from 2026-11-06T23:42:59Z to 2026-11-06T23:55:57Z. Motion only: 10.4 min of real time, 424 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/fields-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the fields clip, what the camera saw.**

![nine frames of fields](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/fields-1-sheet.png)

### nets

What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one

**Clip: nets, the PCB editor from 2026-11-07T00:06:46Z to 2026-11-07T00:08:33Z. Motion only: 1.2 min of real time, 6 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/nets-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the nets clip, what the camera saw.**

![nine frames of nets](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/nets-1-sheet.png)

**Screenshot: the board when nets began.**

![the board when nets began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-nets-1-start.png)

**Screenshot: the board when nets ended.**

![the board when nets ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-nets-1-end.png)

### silkscreen

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, the PCB editor from 2026-11-07T00:10:25Z to 2026-11-07T00:16:43Z. Motion only: 5.3 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/silkscreen-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen clip, what the camera saw.**

![nine frames of silkscreen](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/silkscreen-1-sheet.png)

**Screenshot: the board when silkscreen began.**

![the board when silkscreen began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-silkscreen-1-start.png)

### 3d

What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse

**Clip: 3d, the PCB editor from 2026-11-07T00:24:53Z to 2026-11-07T00:25:23Z. Motion only: 0.4 min of real time, 8 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/3d-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the 3d clip, what the camera saw.**

![nine frames of 3d](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/3d-1-sheet.png)

**Screenshot: the board when 3d began.**

![the board when 3d began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-3d-1-start.png)

### finish

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, the PCB editor from 2026-11-07T00:26:24Z to 2026-11-07T01:14:44Z. Motion only: 40.3 min of real time, 44 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/finish-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish clip, what the camera saw.**

![nine frames of finish](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/finish-1-sheet.png)

**Screenshot: the board when finish began.**

![the board when finish began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-finish-1-start.png)

### export

What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.

**Clip: export, the PCB editor from 2026-11-07T03:12:08Z to 2026-11-07T03:18:14Z. Motion only: 5.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/export-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the export clip, what the camera saw.**

![nine frames of export](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/export-1-sheet.png)

**Screenshot: the board when export began.**

![the board when export began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-export-1-start.png)

### silkscreen, visit 2

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, visit 2, the PCB editor from 2026-11-07T03:24:25Z to 2026-11-07T03:24:44Z. Motion only: 0.3 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/silkscreen-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen, visit 2 clip, what the camera saw.**

![nine frames of silkscreen, visit 2](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/silkscreen-2-sheet.png)

**Screenshot: the board when silkscreen, visit 2 began.**

![the board when silkscreen, visit 2 began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-silkscreen-2-start.png)

**Screenshot: the board when silkscreen, visit 2 ended.**

![the board when silkscreen, visit 2 ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-silkscreen-2-end.png)

### finish, visit 2

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, visit 2, the PCB editor from 2026-11-07T03:25:29Z to 2026-11-07T03:26:20Z. Motion only: 0.7 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/finish-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish, visit 2 clip, what the camera saw.**

![nine frames of finish, visit 2](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/finish-2-sheet.png)

**Screenshot: the board when finish, visit 2 began.**

![the board when finish, visit 2 began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-finish-2-start.png)

### export, visit 2

What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.

**Clip: export, visit 2, the PCB editor from 2026-11-07T03:27:50Z to 2026-11-07T03:32:54Z. Motion only: 4.3 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/export-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the export, visit 2 clip, what the camera saw.**

![nine frames of export, visit 2](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/export-2-sheet.png)

**Screenshot: the board when export, visit 2 began.**

![the board when export, visit 2 began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-export-2-start.png)

**Screenshot: the board when export, visit 2 ended.**

![the board when export, visit 2 ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-export-2-end.png)

### components, visit 2

What this step does: Audit wiki component identity, reusable CAD quality and redistribution evidence before placement; offer cached optional MPN-marked variants.

**Clip: components, visit 2, the PCB editor from 2026-11-07T03:38:06Z to 2026-11-07T03:39:05Z. Motion only: 0.8 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/components-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the components, visit 2 clip, what the camera saw.**

![nine frames of components, visit 2](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/components-2-sheet.png)

**Screenshot: the board when components, visit 2 began.**

![the board when components, visit 2 began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-components-2-start.png)

**Screenshot: the board when components, visit 2 ended.**

![the board when components, visit 2 ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-components-2-end.png)

### finish, visit 3

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, visit 3, the PCB editor from 2026-11-07T03:40:24Z to 2026-11-07T03:41:18Z. Motion only: 0.7 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/finish-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish, visit 3 clip, what the camera saw.**

![nine frames of finish, visit 3](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/finish-3-sheet.png)

**Screenshot: the board when finish, visit 3 began.**

![the board when finish, visit 3 began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-finish-3-start.png)

### export, visit 3

What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.

**Clip: export, visit 3, still recording (started 2026-11-07T03:42:37Z); it appears here when the step ends.**

**Screenshot: the board when export, visit 3 began.**

![the board when export, visit 3 began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-export-3-start.png)

## Plan usage, the second cost line

Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.

| Provider | Limit | At start | At end | Used by this run |
|---|---|---|---|---|
| antigravity | 3p week | 0.00 % | 0.00 % | 0.00 % |
| antigravity | week | 0.00 % | 0.00 % | 0.00 % |
| claude | Fable | 0.00 % | 0.00 % | 0.00 % |
| claude | week | 33.00 % | 39.00 % | 6.00 % |
| codex | week | 0.00 % | 0.00 % | 0.00 % |

*The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*

## Google Antigravity: tokens, quota and cost

0 model calls: 0 fresh input, 0 cached input and 0 output tokens. The run used **0.00 % of the weekly limit**, about **$0.00** of a $199.99/month plan.

| Step | Calls | Fresh input | Cached input | Output |
|---|---|---|---|---|

*Token counts are the difference of Antigravity's own per-call records (its conversation files) between step snapshots; exact when nothing else used Antigravity during the run.*

## Given back

0 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user.

Adom processes PRs within minutes during business hours: a non-stop PR intake runs all day.