Diode-Bridge Voltage-Controlled Attenuator - reports/gerber-export-raw.json

Overview Files Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

main

John Lauer Saif Abdessayed's diode-bridge VCA: KiCad project, Gerbers, BOM, simulations, reports, and the earlier RC filter test 45f3ff6 11d ago

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

{
  "_hint": "Run kicad_run_drc first; never ship Gerbers from a board with DRC errors.",
  "_timeoutHint": "ab waits up to 210s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure — the work usually keeps running on the bridge. Poll `kicad_status` until it reports done.",
  "bridgeVersion": "1.0.53",
  "cliElapsedMs": 2695,
  "cliVersion": "10.0.6",
  "data": {
    "bytes": 234932,
    "files": [
      "diode-vca-attenuator-User_Eco2.gbr",
      "diode-vca-attenuator-B_Fab.gbr",
      "diode-vca-attenuator-B_Mask.gbs",
      "diode-vca-attenuator-User_Eco1.gbr",
      "diode-vca-attenuator-B_Adhesive.gba",
      "diode-vca-attenuator-Edge_Cuts.gm1",
      "diode-vca-attenuator.drl",
      "diode-vca-attenuator-F_Fab.gbr",
      "diode-vca-attenuator-F_Cu.gtl",
      "diode-vca-attenuator-B_Cu.gbl",
      "diode-vca-attenuator-F_Adhesive.gta",
      "diode-vca-attenuator-User_Comments.gbr",
      "diode-vca-attenuator-User_Drawings.gbr",
      "diode-vca-attenuator-B_Courtyard.gbr",
      "diode-vca-attenuator-Margin.gbr",
      "diode-vca-attenuator-F_Silkscreen.gto",
      "diode-vca-attenuator-F_Courtyard.gbr",
      "diode-vca-attenuator-drl_map.pdf",
      "diode-vca-attenuator-B_Silkscreen.gbo",
      "diode-vca-attenuator-job.gbrjob",
      "diode-vca-attenuator-B_Paste.gbp",
      "diode-vca-attenuator-F_Paste.gtp",
      "drill-report.txt",
      "diode-vca-attenuator-F_Mask.gts"
    ],
    "output_path": "//wsl.localhost/Adom-Workspace/home/adom/project/diode-vca-attenuator/manufacturing/gerbers"
  },
  "durationMs": 3833,
  "elapsedMs": 3044,
  "error": "",
  "mechanism": "cli",
  "output": "Gerber exported to //wsl.localhost/Adom-Workspace/home/adom/project/diode-vca-attenuator/manufacturing/gerbers (24 file(s))",
  "path": "//wsl.localhost/Adom-Workspace/home/adom/project/diode-vca-attenuator/diode-vca-attenuator.kicad_pcb",
  "progress": {
    "confidence": "measured",
    "elapsedSec": 3.0,
    "estimatedSec": 3.0,
    "etaSec": 0.0,
    "measured": {
      "phase": "kicad.export",
      "seconds": 3.01,
      "startKind": "cold"
    },
    "percent": 100,
    "phase": "kicad.export",
    "startKind": "cold",
    "stepLabel": "done"
  },
  "schemaVersion": 1,
  "status": "ok",
  "statusVerb": "kicad_status",
  "success": true,
  "timeoutSeconds": 210
}