main
John Lauer JLCPCB build: the JLCPCB BOM (LCSC numbers, fit=post for contacts) and the proof behind every part swap 16d0d50
{
 "ref": "D1",
 "original": "IN-S63BTG",
 "candidate": "XL-1608UGC-04",
 "lcsc": "C965804",
 "verdict": "PASS",
 "checks": [
  {
   "check": "temperature range",
   "pass": true,
   "detail": "[-40, 85] covers [-40, 85]",
   "info": false
  },
  {
   "check": "colour",
   "pass": true,
   "detail": "dominant 525 nm vs 527 nm (within 15)",
   "info": false
  },
  {
   "check": "land fit pad 1",
   "pass": true,
   "detail": "100 % of the terminal on pad 1 (0.88 x 0.95 at -0.79, 0.00)",
   "info": false
  },
  {
   "check": "land fit pad 2",
   "pass": true,
   "detail": "100 % of the terminal on pad 2 (0.88 x 0.95 at 0.79, 0.00)",
   "info": false
  },
  {
   "check": "polarity",
   "pass": true,
   "detail": "original {'pad': '1', 'is': 'cathode'}, candidate {'pad': '1', 'is': 'cathode'}",
   "info": false
  },
  {
   "check": "LED current",
   "pass": true,
   "detail": "0.91 mA through 2200 ohm from 5 V (Vf 3 V)",
   "info": false
  },
  {
   "check": "original not on LCSC",
   "pass": true,
   "detail": "searched IN-S63BTG (listed as C5740463, out of stock, not orderable) on 2026-10-05: not found",
   "info": false
  }
 ],
 "checkedAt": "2026-10-05T14:07:23+00:00",
 "facts": "design/swaps/D1.json",
 "notes": "The Inolux part is listed on LCSC but out of stock. Same 0603 emerald green (dominant 515-535 nm, peak 525 nm), Vf 2.6-3.4 V at 20 mA (bin M19-3 3.0-3.1 V), pin 1 = cathode as on the board; R6 2.2k from 5 V gives about 0.9 mA, a visible power-good glow well under the 20 mA rating."
}