65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 1 open item(s); not cleared for fabrication** (2026-11-09T06:54:30Z, 435.0 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 1 open item(s); not cleared for fabrication** (2026-11-09T06:54:30Z, 437.7 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -17,8 +17,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 5 | 2026-11-09T15:29:58Z | (open) | 0.1 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 8 | 2026-11-09T19:50:33Z | (open) | 3.9 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **435.0** | | |+| 8 | 2026-11-09T19:50:33Z | (open) | 6.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **437.7** | | |  ## Per step @@ -29,7 +29,7 @@ AI time only, the idle cut out. | intake | 7.0 | 6.8 | 0.1 | 5 | 0 | 0 | 5.8 min | | placement | 41.5 | 18.1 | 23.4 | 76 | 7 | 5 | 5.0 min | | routing | 151.2 | 25.5 | 125.7 | 57 | 10 | 0 | 7.0 min |-| pours | 45.5 | 22.6 | 22.9 | 77 | 9 | 3 | 9.5 min |+| pours | 45.6 | 22.6 | 23.0 | 78 | 10 | 4 | 9.5 min | | current | 58.2 | 1.1 | 57.1 | 25 | 8 | 1 | 0.5 min | | thermal | 9.2 | 2.1 | 7.1 | 22 | 8 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |@@ -49,12 +49,12 @@ AI time only, the idle cut out. | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min | | rules | 0.9 | 0.8 | 0.1 | 4 | 1 | 1 | 0.8 min | | schematic | 14.6 | 13.8 | 0.8 | 4 | 1 | 1 | 8.6 min |-| silkscreen | 13.8 | 8.4 | 5.5 | 27 | 4 | 0 | 4.8 min |+| silkscreen | 16.5 | 9.0 | 7.5 | 38 | 4 | 0 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 0.4 | 0.0 | 0.4 | 7 | 3 | 0 | 0.0 min |-| **total** | **435.0** | **137.6** | **297.4** | | | | |+| **total** | **437.7** | **138.2** | **299.6** | | | | |  ## Returns to earlier steps @@ -71,6 +71,7 @@ AI time only, the idle cut out. - 2026-11-09T06:33:51Z back to **placement** (visit 6): re-record proofs after the rules revisit; board and spec unchanged - 2026-11-09T06:37:26Z back to **fields** (visit 3): re-record walkthroughs after the proof re-run; board and spec unchanged - 2026-11-09T08:10:42Z back to **placement** (visit 7): Aesthetic redesign requested: symmetric controller area around the centred USB-C (ESD below the connector, STM32 right, power block left)+- 2026-11-09T19:57:06Z back to **pours** (visit 10):   ## Decisions along the way @@ -149,15 +150,12 @@ AI time only, the idle cut out. - 2026-11-09T17:47:44Z clip-start:pours-8 - 2026-11-09T17:59:51Z clip-start:pours-9 - 2026-11-09T19:50:33Z clip guard: the pours clip ran 110 min, past its 15 min budget twice over; stopped by the guard+- 2026-11-09T19:57:07Z clip-start:pours-10  ## Where the board stands  - gate: 0 new DRC errors, 0 unconnected, null inherited - landed live: 0 of 0 route entries-- pours (landed): 1 groups, failed []-- copper kept (mm2 per layer): null-- analyze-current: fail-- analyze-thermal: pass  ## The steps on camera @@ -1313,6 +1311,16 @@ What this step does: pour every net the spec names, keepouts along Kelvin taps,  ![the board when pours, visit 9 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-9-start.png) +### pours, visit 10++What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept++**Clip: pours, visit 10, still recording (started 2026-11-09T19:57:07Z); it appears here when the step ends.**++**Screenshot: the board when pours, visit 10 began.**++![the board when pours, visit 10 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-10-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.