65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `routing`, 87.1 min of AI time since the prompt (111.1 min on the wall clock). This page updates at every step change.+**Running**: step `placement`, 124.6 min of AI time since the prompt (148.7 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 87.1 | 24 | the first prompt |-| **all** | | | **87.1** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 124.6 | 24 | the first prompt |+| **all** | | | **124.6** | | |  ## Per step @@ -20,8 +20,8 @@ AI time only, the idle cut out. | Step | AI min | AI thinking min | Tool min | Turns | Visits | Returns | Longest think | |---|---|---|---|---|---|---|---| | intake | 7.0 | 6.8 | 0.1 | 5 | 0 | 0 | 5.8 min |-| placement | 23.4 | 11.4 | 12.0 | 45 | 1 | 0 | 4.2 min |-| routing | 3.4 | 0.0 | 3.4 | 1 | 1 | 0 | 0.0 min |+| placement | 25.9 | 11.4 | 14.5 | 46 | 2 | 1 | 4.2 min |+| routing | 38.4 | 3.7 | 34.6 | 3 | 1 | 0 | 3.7 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |@@ -36,7 +36,11 @@ AI time only, the idle cut out. | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.3 | 1.3 | 0.0 | 3 | 0 | 0 | 1.3 min |-| **total** | **87.1** | **67.1** | **19.9** | | | | |+| **total** | **124.6** | **70.8** | **53.8** | | | | |++## Returns to earlier steps++- 2026-11-09T02:48:09Z back to **placement** (visit 2): router could not escape the STM32: matrix pins faced the board edge and decoupling caps boxed the chip in on all sides; turning U1 180 deg and moving caps to their supply pins  ## Decisions along the way @@ -45,9 +49,11 @@ AI time only, the idle cut out. - 2026-11-09T01:22:06Z recut: 1 clips re-cut (10x and action) with this binary's rules - 2026-11-09T01:22:29Z clip-start:placement-1 - 2026-11-09T02:13:07Z clip-start:routing-1+- 2026-11-09T02:50:40Z clip-start:placement-2  ## Where the board stands +- routing: 35 unrouted after null passes  ## The steps on camera @@ -113,21 +119,43 @@ What this step does: place the parts for routability, current and heat; the bina  What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai -**Clip: routing, still recording (started 2026-11-09T02:13:07Z); it appears here when the step ends.**+**Clip: routing, the PCB editor from 2026-11-09T02:13:07Z to 2026-11-09T02:48:36Z. Motion only: 35.0 min of real time, 30 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the routing clip, what the camera saw.**++![nine frames of routing](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-1-sheet.png)  **Screenshot: the board when routing began.**  ![the board when routing began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-1-start.png) +**Screenshot: the board when routing ended.**++![the board when routing ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-1-end.png)++### placement, visit 2 (rework)++What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here++Why the AI came back here: router could not escape the STM32: matrix pins faced the board edge and decoupling caps boxed the chip in on all sides; turning U1 180 deg and moving caps to their supply pins++**Clip: placement, visit 2 (rework), still recording (started 2026-11-09T02:50:40Z); it appears here when the step ends.**++**Screenshot: the board when placement, visit 2 (rework) began.**++![the board when placement, visit 2 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-2-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 8.00 % | 11.00 % | 3.00 % |+| claude | 5h | 8.00 % | 12.00 % | 4.00 % | | claude | Fable | 65.00 % | 65.00 % | 0.00 % |-| claude | week | 43.00 % | 43.00 % | 0.00 % |+| claude | week | 43.00 % | 44.00 % | 1.00 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*