65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 4 open item(s); not cleared for fabrication** (2026-11-09T22:43:17Z, 926.5 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 4 open item(s); not cleared for fabrication** (2026-11-09T22:43:17Z, 927.0 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -18,8 +18,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 8 | 2026-11-09T19:50:33Z | (open) | 95.4 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 9 | 2026-11-09T21:59:30Z | (open) | 399.9 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **926.5** | | |+| 9 | 2026-11-09T21:59:30Z | (open) | 400.4 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **927.0** | | |  ## Per step @@ -38,24 +38,24 @@ AI time only, the idle cut out. | 3d | 8.3 | 0.1 | 8.2 | 16 | 6 | 0 | 0.1 min | | components | 1.4 | 0.1 | 1.2 | 5 | 2 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |-| export | 358.6 | 15.2 | 343.4 | 61 | 7 | 0 | 4.2 min |+| export | 358.8 | 15.2 | 343.6 | 61 | 7 | 0 | 4.2 min | | fields | 82.6 | 0.3 | 82.3 | 17 | 7 | 1 | 0.2 min | | libraries | 0.1 | 0.1 | 0.1 | 2 | 2 | 0 | 0.1 min | | library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min | | models | 2.7 | 1.2 | 1.4 | 6 | 2 | 0 | 1.1 min |-| nets | 6.4 | 0.1 | 6.3 | 13 | 7 | 0 | 0.1 min |+| nets | 6.8 | 0.1 | 6.6 | 14 | 7 | 0 | 0.1 min | | other | 0.4 | 0.0 | 0.4 | 7 | 0 | 0 | 0.0 min | | outline | 1.0 | 0.1 | 0.9 | 8 | 4 | 1 | 0.1 min | | parts | 3.1 | 1.8 | 1.3 | 5 | 0 | 0 | 1.5 min | | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min | | rules | 1.3 | 0.8 | 0.5 | 8 | 2 | 2 | 0.8 min | | schematic | 14.6 | 13.8 | 0.8 | 4 | 1 | 1 | 8.6 min |-| silkscreen | 23.1 | 11.7 | 11.5 | 64 | 10 | 2 | 4.8 min |+| silkscreen | 23.1 | 11.7 | 11.5 | 65 | 11 | 2 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 7 | 2 | 0 | 1.3 min | | thermal-vias | 1.7 | 0.0 | 1.6 | 12 | 5 | 1 | 0.0 min |-| **total** | **926.5** | **160.2** | **766.2** | | | | |+| **total** | **927.0** | **160.2** | **766.8** | | | | |  ## Returns to earlier steps @@ -214,6 +214,10 @@ AI time only, the idle cut out. - 2026-11-10T04:17:42Z clip-start:current-13 - 2026-11-10T04:36:43Z clip-start:thermal-13 - 2026-11-10T04:39:24Z clip-start:nets-7+- 2026-11-10T04:39:31Z net GND: 121 items highlighted+- 2026-11-10T04:39:36Z net +3V3: 86 items highlighted+- 2026-11-10T04:39:40Z net VBUS: 32 items highlighted+- 2026-11-10T04:39:52Z clip-start:silkscreen-11  ## Where the board stands @@ -2102,12 +2106,32 @@ What this step does: copper and vias at every hot tab against the rise budget; t  What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one -**Clip: nets, visit 7, still recording (started 2026-11-10T04:39:24Z); it appears here when the step ends.**+**Clip: nets, visit 7, the PCB editor from 2026-11-10T04:39:24Z to 2026-11-10T04:39:46Z. Motion only: 0.4 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-7.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the nets, visit 7 clip, what the camera saw.**++![nine frames of nets, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-7-sheet.png)  **Screenshot: the board when nets, visit 7 began.**  ![the board when nets, visit 7 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-7-start.png) +**Screenshot: the board when nets, visit 7 ended.**++![the board when nets, visit 7 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-7-end.png)++### silkscreen, visit 11++What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.++**Clip: silkscreen, visit 11, still recording (started 2026-11-10T04:39:52Z); it appears here when the step ends.**++**Screenshot: the board when silkscreen, visit 11 began.**++![the board when silkscreen, visit 11 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-11-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.