65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 4 open item(s); not cleared for fabrication** (2026-11-09T22:43:17Z, 899.3 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 4 open item(s); not cleared for fabrication** (2026-11-09T22:43:17Z, 900.1 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -18,8 +18,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 8 | 2026-11-09T19:50:33Z | (open) | 95.4 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 9 | 2026-11-09T21:59:30Z | (open) | 372.7 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **899.3** | | |+| 9 | 2026-11-09T21:59:30Z | (open) | 373.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **900.1** | | |  ## Per step @@ -38,11 +38,11 @@ AI time only, the idle cut out. | 3d | 8.3 | 0.1 | 8.2 | 16 | 6 | 0 | 0.1 min | | components | 1.4 | 0.1 | 1.2 | 5 | 2 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |-| export | 357.9 | 15.2 | 342.6 | 61 | 7 | 0 | 4.2 min |+| export | 358.0 | 15.2 | 342.8 | 61 | 7 | 0 | 4.2 min | | fields | 80.2 | 0.3 | 79.9 | 15 | 6 | 1 | 0.2 min | | libraries | 0.1 | 0.1 | 0.1 | 2 | 2 | 0 | 0.1 min | | library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min |-| models | 2.0 | 1.2 | 0.8 | 5 | 2 | 0 | 1.1 min |+| models | 2.7 | 1.2 | 1.4 | 6 | 2 | 0 | 1.1 min | | nets | 6.4 | 0.1 | 6.3 | 12 | 6 | 0 | 0.1 min | | other | 0.4 | 0.0 | 0.4 | 7 | 0 | 0 | 0.0 min | | outline | 0.6 | 0.1 | 0.5 | 6 | 3 | 1 | 0.1 min |@@ -53,9 +53,9 @@ AI time only, the idle cut out. | silkscreen | 23.1 | 11.7 | 11.5 | 64 | 10 | 2 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min |-| test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min |+| test-plan | 1.5 | 1.3 | 0.2 | 6 | 2 | 0 | 1.3 min | | thermal-vias | 1.4 | 0.0 | 1.4 | 10 | 4 | 1 | 0.0 min |-| **total** | **899.3** | **160.2** | **739.0** | | | | |+| **total** | **900.1** | **160.2** | **739.8** | | | | |  ## Returns to earlier steps @@ -204,6 +204,7 @@ AI time only, the idle cut out. - 2026-11-09T22:42:10Z artifact analysis-image for fields-6: Adom Fields current and heat screen on the final board: VBUS and GND at 0.5 A peak 40 A/mm2, +3V3 at 0.1 A 12 A/mm2, under 1 C rise in still air. The 'no TVS' tag on J2 is expected: ESD protection is on the USB daughterboard. - 2026-11-09T22:42:48Z pulled 2 clip(s) that had not reached the run - 2026-11-10T04:11:02Z clip-start:rules-2+- 2026-11-10T04:12:59Z clip-start:test-plan-2  ## Where the board stands @@ -1920,6 +1921,16 @@ Why the AI came back here: Rev B requested by the user: PCBWay bare board (hand-  ![the board when rules, visit 2 (rework) ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-rules-2-end.png) +### test-plan, visit 2++What this step does: Think through how this board will be tested once it is built and on the probing workcell: the measurements a careful engineer would take (rails, switch node, feedback, ripple, enable, LEDs), the net each one needs, and a probe spot for every one. The binary checks each planned measurement has a probe-able spot (a 0.5 mm round test point or an exposed pad the pogo tip can land on, within 50 mm of a ground machine contact, not under a part body) and adds a test point to the netlist for every gap.++**Clip: test-plan, visit 2, still recording (started 2026-11-10T04:12:59Z); it appears here when the step ends.**++**Screenshot: the board when test-plan, visit 2 began.**++![the board when test-plan, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-test-plan-2-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.

⋯ 1 unchanged line ⋯